Hardware :: Installed Fglrx - Now Monitor Turns Off During Boot?
Sep 20, 2010
I have just installed an ATI Radeon HD 2600 Pro (AGP) in my tower, which is running Ubuntu 10.04. I installed the fglrx driver via Jockey, and ran 'aticonfig --initial', with no errors. Now, when I boot, it gets as far as the plymouth splash screen, and the display turns off, and the power light flashes on and off. If I boot in failsafe and use the backed up confguration, it works fine again. The monitor I am using is quite an old one - a 17" CRT with maximum resolution of 1152x864. I do not know the vendor.
FC13. In Screensaver, I've made sure no screensaver is selected. In Power Management, PowerDevil is unchecked, profile is set to "performance" and that profile is set to never dim the screen. In fact, just to be sure, I edited all the other unselected profiles to not dim the screen. I've done this as a user, and I've done this as root. My monitor still gets turned off at the 10 minutes mark (I used a stopwatch).
Site search only turned up this thread, but I'm using kde not gnome, and I can't locate a screensaver daemon to kill.
I've read many posts about other people having this issue and I can't seem to find one that is the same problem I am having. I'm totally new to ubuntu and linux as well for that matter, Basically I wanted to give linux a try and started doing some research and liked everything I read about ubuntu. I went to the website and used the wubi (I think that was what it was called) to install ubuntu. Now when I boot my computer it asks me which operating system I would like to use. I navigate to ubuntu and press enter and it starts up with no problems what so ever.
At first I was really surprised with how easy the installation was and how great everything was going, however. After looking around for about 10 minutes, the screen abruptly went black and then my monitor had a small blue box on it with "No input" on it before the light went from blue to orange. I tried hitting every combination of keys I could think of and in the end had to do a hard restart.
Long story short. every time I use ubuntu my monitor shuts off after about 10-20 minutes, regardless of what activity I am doing. I've tried going to /apps/gnome-power-manager/timeout/ to make sure that sleep_display_ac was set to 0 (it was), I've turned off power management using the power manger under preferences. No matter what I have tried, it continues to be a problem.
the problem is: my monitor turns off when I want to install ubuntu! t's really pissing me off right now.Explanation:right now, I'm using Ubuntu 9.10, and I want to installUbuntu 10.04, so I made a bootable usb, and i booted my computeron this usb. so far, there's nothing going wrong. First, I had to select a language for Ubuntu, so I did that.After that, I had to choose want i want to do with ubuntu,so I selected (of course) "install Ubuntu".Then i got the loading screen, and after a short time,suddenly my monitor turns off
i can't install ubuntu because after booting from cd. the screen just shows a violet with a man and a keyboard logo on the lower mid and after that the monitor goes off.
My VLC player blocks screensaver while playing, but my monitor still turns off when watching for some time. I did a few searches, but I don't see any good keywords so I'm starting a new thread.
suspend has always worked fine with 11.04 and now it stopped working a few days ago. How can I figure out what is going on? The display turns off but the computer never turns off and the only way to bring it back is to hold the power button down and then start it back up.
fglrx driver for ATI card pushes monitor out of range
I am running Ubuntu 9.10, my video card is ATI Radeon HD 3600
Heres my issue:
When I originally attempted to enable desktop effects, I was told that I was unable to do so. Not being one to rush to ask a question, I tried to figure out the issue, and it seemed to be that I needed to install the fglrx driver available for ATI cards- a simple enough fix. I installed the driver, and rebooted my machine, and everything seemed to be fine- the initial splash page came up- but immediately afterwards (presumably when I reached the login screen) My monitor went out of range.
Not being strong in coding, I was unable to figure out a way to remove the driver without a GUI (though I think I very well could have), so I had to uninstall and reinstall (no sweat, I hadn't really started anything yet). However, its obvious that the fglrx driver is what blew it out of range.
My question is, is there anything I can do to get this driver to work on my machine? I found similar questions but they all seemed either to be slightly different from my issue or recommended changing the .xorg file, which does not exist in 9.10.
Today I spend the day updating to Fedora 15 (from 14). And by spent the day updating to Fedora 15, I mean that like the last 3 updates I've tried with Fedora, they end up getting hosed and I was forced to rebuild using a live disk. That being said I was able to install a fresh instance of Fedora, as well as use leigh123linux's "F15,F14, F13 & F12 Nvidia driver guides" thread to install the necessary drivers on my machine. However after the last reboot, I'm stuck with a funky top screen.
When booting up the linux distro everything boots up fine. However the linux terminal shows "-Bash:" and doesn't show the current directory. This may be fine for some people but I need to know what directory I am working in and having it displayed would make things a LOT easier.
Sadly though I can't find any useful information about doing this.I found something like "PS1=w" but that doesn't do anything at all. Oh yeah and I don't have a .bashrc nor a /etc/bashrc for some reason. Also when trying to use a framebuffer and using "vga=791" (1024x768) in grub the monitor turns itself off. This applies if I set vga to anything. I believe I compiled framebuffer support in the kernel but I am not 100% sure so if you believe that is the problem then I will double check. That would require redownloading the source again and networking hasn't been set up yet so.
Also what packages does "iwconfig", "ifconfig", and "dhcpcd" come in? Those are the tools I commonly used to connect to my wireless internet but they are not present in the linux distro.
I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
I had Ubuntu installed on my old laptop in dualboot with windows. This year i bought a new Sony Vaio VPCS12M9E preinstalled with windows 7 pro, but i liked the idea of having the opportunity of chosing between windows and ubuntu, so i downloaded ubuntu 10.10 and burned the ISO-image to a disc, and restarted my laptop just as i did when i installed it on my old laptop. The problem is that when i boot the disc after restarting the computer, the screen just turns black. What can i do to install Ubuntu?
I wouldnt be posting here because I like to solve my problems by myself but I just dont know what else to do. I want to go back to the ubuntu world and I tried Kubuntu. After Installing the Fglrx drivers after a fresh install (10.10 32 bits) through the restricted drivers it shows an ugly font ubuntu loading screen and after that the screen turns "off" (like if there was no signal, the "on/off" light flickers) and it stays like that, but I can use the Ctrl+alt+f1 console. Installing the drivers from ati webiste ends in the same result as before. Downloaded Ubunt 10.10 32 bit and installed it, same results. I have a Radeon HD 3300 integrated. I dont know what to do. The open source drivers works well, but there is no 1280x1024 resolution in the screen manage
I've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code: ~> fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Mobility Radeon HD 4300 Series OpenGL version string: 3.3.10151 Compatibility Profile Context Shows fglrx works OK, as well as overall performance is pretty good.
I've done Code: aticonfig --initial radeon drivers is also blacklisted but running (if it means something) Code: # depmod -a; lsmod | grep radeon radeon 868858 0 ttm 64561 1 radeon drm_kms_helper 32944 1 radeon drm 221516 3 radeon,ttm,drm_kms_helper i2c_algo_bit 6728 1 radeon
I'm running 10.10 from an 8GB USB flash drive with persistence to see if I can get it working the way I need it before I can completely transition from Windows. I have an onboard ATI Radeon HD3300 running dual monitors which is on the list of supported devices for the FGLRX driver package, but I've encountered multiple issues.
First, when I chose to activate it from the Add'l Drivers dialog, it gave an error: "SystemError: installArchives() failed". I found a forum where someone had suggested opening the Terminal and giving the following commands:sudo aticonfig --initialfollowed bysudo rebootWhen my system rebooted, the Ubuntu screen showed "Ubuntu 10.10" in a plain font instead of the Ubuntu graphical logo, and then it quickly displays an error in a dark-colored font and then the screen flickers several times before stopping at a full-screen terminal. I have never used Linux before, so I don't know any commands at all or even what to do from here. I just want the dual screens to work and have the correct resolution.
Am I going to have to format and reload my flash drive again?
I have installed (successfully) Ubuntu 10.04 ppc on my powerpc g4 mac. 400mhz, 1g ram. Its the blue model. It works great, but it does not detect my monitor, and I can not change the settings past 800 X 600. I am using a Dell 19 inch monitor. Analog input (not DVI yet) resolution 12080 x 1024 60hz. I believe I need to change the info in the xconfig file (but I don't know to what or how), and I may not be saying that correctly.
I'm running Ubuntu 10.04 LTS on a Macbook 3,1 late 2007. I have an HP paviilon f1703 external monitor that I would like to use as the main screen to load the full resolution GUI without using the laptop monitor at all. I've done several Google searches and tried several remedies, and I'm either doing them totally wrong (which is very very possible because I'm such a newb), their out of date, or their just not working for me.
i have a viewsonic VA712b monitor that used to get 1280x1024 resolution on my dell optiplex gx260 that had the intel video card.i upgraded my motherboard cpu and memory..the nvidia 6100 that is onboard seems like it would be an improvement to my old onboard intel but the best resolution i can get is 1024x768
i installed the nvidia 185 drivers and it's not recognizing my monitor as a flat panel lcd but as a crt, also it won't set the correct refreshrate - either 60 or 75.. it's set at 50... since xorg 7.4 no longer uses a xorg.conf file.. i'm not sure how to go about manually adjusting the settings to ones that will actually work. i mean other than buying a separate graphics car (URL)
upon adding the installed VL on the existing LILO.. (btw i have not installed its LILO on the installation setup) since i know that i will just add it to the "existing" LILO the error above arises upon doing the lilo run command.$adding Vector6.0 etc.FATAL : Boot sector of /dev/hdc13 doesn't have a boot signature.i have tagged the /dev/hdc13 bootable via CFDISK. but same problem arises..
I'd like to boot using Windows 7 boot manager (I don't dare to put grub in the MBR).
I've used EasyBCD to add a new entry for Ubuntu.
[url]
Then I added Grub to /dev/sda3
And I get this:
[url]
The problem is that it always shows (hd0,0) instead of (hd0,2). I must change it every time I boot. I've tried to install grub again but I always get the same.
And another problem. After that Grub menu it deesn't load Linux but it loads a second grub menu [url] that loads Linux properly.
I guess I've installed two Grubs.
How can I remove the first Grub menu (Grub4dos) and make Windows 7 load the second (the good one)? or how can I remove the second one and change (hd0,0) to (hd0,2) in the second?
Before the installation, I had triple boot of WinXP, Win 7, Ubuntu 10.10. As you can guess, the main boot-loader was grub. The second is Win 7 boot loader, and there it gives the option what to choose, load XP or Win 7.I made a decision to remove Ubuntu and install Debian(you know better than me why I did). So first, I searched a guide how to un-dual-boot. It told me to delete the two partition that Ubuntu use(swap and ext4) and write to MBR the win 7 boot-loader(using EasyBCD), so I delete them and use EeasyBCD. At this stage, I had 2 partitions: NTFS for XP and NTFS for Win 7, and the Win 7 boot-loader(and XP) worked pretty well.I install the latest testing of Debian(6 RC2) from DVD1 using this guide, except I choose to use the graphical installer, ext4(not ext3 as there), install the desktop environment, and choose to install grub(even know it didn't asked me). The swap partition I set is 3 GB because my RAM is 2 GB, even know that ubuntu set it in the past to 2 GB.The installation went pretty well, just when come to grub package, it says that there was an error with installing grub package(it didn't told me what), I had no choice, so I choose to skip over grub/lilo and finish with no boot manager. I was thinking to myself: "So I couldn't install grub, at least I have the Win 7 boot-loader(which contain XP loader), and maybe Win 7 boot-loader will recognize Debian too.". But I end up with no boot at all.It told me than when choose not to install boot-manager that I need to load /vmlinuz and give it the parameter root=/dev/sda4(my deb partition).I think that if I could install grub, I could load all my boots("sudo grub update" right?).How can I fix it?
my computer this morning, then it suddenly turns off. I press the power button and nothing happens. After a minute I press it again and it turns on, but it quickly shuts down when it hit the boot screen. After I tried turning it on again, but it turns on for about 2 seconds and quickly dies. Some times it turns on itself and then turns back off. This happened when I had WIN XP installed too (which was about 2 years ago). I run full Ubuntu 9.1, no double boot. Is this hardware problem or a virus that affects both Windows and Linux? :O
I am running Fedora 13 at the moment and am having trouble with my internet connection. The connection works fine, but at some point during the night, it turns itself off. When I try to get back on in the morning, I have to sudo ifup eth0 to get it working again. I tried a small bash script running through cron to do this for me every hour, but that doesn't seem to fix the problem.
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb d: 150 gb e: 150 gb f: 100 gb g: 50 gb and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
lt a file server using Fedora 11, and it works great if the monitor is connected. If I disconnect the monitor, Fedora 11 won't boot; it hangs. I have found many people having the same problem, but no one seems to have a solution.
I have an ubuntu server installed on an old computer (Its a Pentium 4) and it was running fine for a while but ever since I installed the JDK (x11-common was a dependency) the system starts fine but I'm unable to connect to it through ssh unless a monitor was plugged into the computer. I also am unable to ping it, meaning its no longer connected.
Also, if I leave it running for a while it the same thing happens (ping returns destination not found). Anyone knows how can I fix this?
I don't know if this is useful but the server is connected to a wireless network that uses a WPA2 key.
I believe it might have to do with dpms (according to KiPi on the #debian-boot chatroom) but I'm not entirely sure why my monitors keep turning off 10 minutes into the installation. I have tried using Live CD and a netinst version of the Debian 8.2 installation methods.
I'm going to try to disable dpms in the Live CD and hopefully that works.
While using FireFox the application will sometimes turn a shade of grey. Almost as if the entire application is locked. Most times if I wait for a while it will "colorize" itself after a moment or two and I'm right back to doing whatever I was doing.,I was just wondering if anybody could tell me why this happens?
I have noticed that the AutoTen program does the same thing while an application is being installed. The terminal-style window will open and start doing all the important stuff, and the GUI will grey out until it's done... I just don't understand why FireFox would be doing this...
