Hardware :: Indications About TV Tuner That Works With Fedora 12
Mar 31, 2010
I need a TV Tuner - external (not internal) who work with Fedora 12. I have cable tv also. I see on internet to many technical details about tv tuner. I'm asking you , because:
1.[URL] - not working
2. and I saw this :
"USB tuners are no good. Apparently USB doesn't have enough bandwidth to handle the video and audio, so the results are poor quality."-from [URL]
Any model which worked well with Fedora 12.
View 2 Replies
ADVERTISEMENT
May 18, 2010
Gateway desktop running Ubuntu LL 10.04(64 bit) with Asus/ViXS Combo-210E NTSC/ATSC TV Tuner card: link to card... [URL] Ubuntu lists the card when I do lshw in a terminal but it shows as 'unclaimed'. Is that important? Also what software is neccessary to watch tv? The card works fine in Windows7
View 6 Replies
View Related
Jul 23, 2009
i have a pinnacle hybrid pro 302e usb tuner. the sound is played with arecord accessing the device and aplay playing it. the video by tvtime.the channel National Geographic comes at 719.25Mhz in my analog cable tv input.I AM GETTING HUGE amount of crackling and squealing noise from this channel. There are a few other channels like star movies at 83.50Mhz which has similar bad sound.i know it might have to do with reception but can you suggest something i can do to pre process the sound before its played so as to reduce the artifacts (video is okay).
View 2 Replies
View Related
Mar 9, 2010
I only use windows to watch TV on my tuner. If i can find one for Linux i would never use WINBLOWS again. I have a ViXS Pure TV-U 48B0 (NTSC/ATSC Combo) Any scripts they i can run to use this tuner. What a good TV Tuner or a list of TV tuner that work with linux. I love how alot of companys dont support us linux users huh.
View 9 Replies
View Related
Nov 26, 2010
configure tvtuner on Fedora 14. I have an old analog tv tuner with saa7134 chipset and trying to connect it with cable tv, after quick google-ing i read that the driver for this model are included in the kernel by default, but when i open tvtime i get the following error:
View 5 Replies
View Related
Jun 16, 2009
I have a Kaiser Baas DVB tuner, which is a USB device.I've installed the firmware, and dmesg tells me the firmware is loading.The wee red light tells me the tuner is operating.I'm running Fedora 11, and I've installed kaffeine, which recognizes there's a DVB device running. But when I do a channel scan (which I've tried using a couple of local sources and the AUTO option), I don't see any channels. I've tried various filter options, no joy.Using the supplied Windows software, a scan gives me about 20 digital channels.
View 14 Replies
View Related
May 19, 2011
Is there anyway I can connect my desktop to a satellite tv decoder and watch the stations from my desktop? I only know tbs 6981 dual tuner card.
View 1 Replies
View Related
Mar 24, 2011
I have installed a new TV Tuner Card. AverTV Super 009 TV Tuner Card from Avermedia. I am using Fedora 14. How can I make the above card work for me? (I am not proficient in Linux.)
View 6 Replies
View Related
Jun 9, 2011
I want to watch tv with my usb tv tuner Pinnacle pctv hybrid pro on Fedora 15 64bit.The best i could do is watch analog tv without sound at all ! or watching digital tv but without the ability to change channels ! i need to press the stop button and then choose my channel and hit play again. If i tried to change chanell it stuck . [URL] Its a quality tvtuner and i would like to use it.PS1: I was completely crazy testing the Fedora 15 64bit , gnome UI was so fantastic, fedora was so fast not like the ubuntu fatpig. Im so decided to format my harddisk and install only fedora.
View 1 Replies
View Related
Feb 27, 2011
I am trying to resolve an ongoing fight involving /dev/video node assignment between 2 TV Tuner cards and a USB video camera.
Each time I reboot the three devices seem to shuffle their /dev/video assignment. i.e. what was /dev/video0 (USB camera) after a reboot magically becomes /dev/video1.
This causes all kinds of grief between my MythBackend and ZoneMinder who expect the devices to have static assignments.
how to best solve this? I did a brief search and one solution appears to be to statically assign the devices.
View 3 Replies
View Related
Jan 13, 2010
using ubuntu and the corporate edition of open dns? >Im curious to find out how the anti malware filtering works in open dns works.
View 4 Replies
View Related
Aug 29, 2010
I just want to be able to copy the files from a cd that is only compatible with windows to and new cd that is compatible with ubuntu
View 9 Replies
View Related
Jul 8, 2010
I've got a problem in doing sudo working for mounting things (e.g. usb pen or optic discs). Details:The OS: Slackware 13.0The response to sudo -l command:
Code:
User user1 may run the following commands on this host:
root) /sbin/shutdown -h now, /sbin/shutdown -r now
[code]...
View 3 Replies
View Related
May 24, 2010
what do I need to install to get a USB tv tuner working? I have a generic usb "stick". It shows up in windows as a 7240 TVBox. I've tried mythtv, but it doesn't see or show the device. I am running Ubuntu 9.1.
View 8 Replies
View Related
Mar 19, 2011
I've got a Gigabyte TV Tuner card which provides software/player for windows only. Does anyone know how to make it work on ubuntu too, please? It's Gigabyte GT-P6000.
View 7 Replies
View Related
Jan 30, 2009
I am trying to install a Hauppauge PVR-150 into my CentOS 5 machine. When the card is installed, I get the error "Disabling IRQ #5" upon startup, and the machine loses networking. Does anyone know why I'm receiving this error?
View 14 Replies
View Related
Nov 4, 2010
I have a PEAK 102569AGPK that I can't get to play nice.
Using Ubuntu Netbook 10.10
lsusb-v gives this:
But no driver is being found - dmesg: usb 1-1: new high speed USB device using ehci_hcd and address 6
Works well under windows, which identifies it as an rtl2832u. I've tried installing Realtek-provided drivers, but still device is not found.
View 1 Replies
View Related
Oct 5, 2010
I am using prolink pixel view USB tv tuner. How i can watch TV & configure the USB TV tuner. How I can detect my usb tv tuner. Its work fine in Windows. Now I had installed Open Suse 11.3 .
View 1 Replies
View Related
Feb 2, 2010
How do I install a TV tuner RPC-TV-PCI-FM in Ubuntu 9.10?I searched on various forums, but I do not found, how to set this model of tv tuner.
View 4 Replies
View Related
Nov 23, 2010
what DVB-T USB tuner should I buy? I expect it to have full support including the remote control operation. Intended use is for Ubuntu with XBMC installed.
View 3 Replies
View Related
Apr 1, 2011
I haven't had one for years, so i am not even really sure what options to look for. So i need to be able to stream media, record media, record cable box, play cable box, listen to local FM radio would be really nice.
View 1 Replies
View Related
May 6, 2011
I have compro videomate m330f tv card recognised as Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
[Code]....
View 4 Replies
View Related
Dec 13, 2008
I am needing a tv tuner card that is compatible with linux. My tv went out so i need to be able to hook up my directv receiver to the card.
View 10 Replies
View Related
Jan 13, 2010
I think the subject title says it all, but well... that's what I would like to do, to buy a TV tuner with support for HD resolution (although I'll be working with a 15.6" 16:9 1366x768 display, laptop one) to hook up a PS3 and not having to spend some extra cash on a display (ideally).
Can anyone give me a hint on this? The only 'premise' I ideally pursue is for the device to fully work, I mean... fuck DVB-T per se, I'm not interested in TV reception, just to put the A/V signal out of the PS3 and onto the tuner and use a program like tvtime (ideally), but something that can work reliably (even if I have to grab a tarball or a cvs/svn/git tree and compile it myself, as I use a custom-made+deviated CLFS/LFS distro, I'm more than accustomed to compile everything by hand).
View 1 Replies
View Related
Oct 13, 2015
I have a generic saa7134 PCI TV Tuner branded as Encore without a radio. Recently I got it working on xawtv (with a pcm error delayed sound and TVTime (no sound? unless executed a record <parameters>. Now, i want to use that TV Tuner in GNU Radio GQRX-SDR to listen or receive NOAA APT transmission, but the problem is I don't know how to get it done. I tried to research but nothing came up with my configuration. I dont have any other USB SDR so Im just using the PCI TV Tuner. Any other ways to resolve the delayed sound in xawtv/arecord? Im using the saa7134-alsa. Any other software to manually set the frequency of the TV Tuner in the NOAA freq 137.xMHz so I can just record it using any application.
Additional info:
I am using Debian GNU/Linux 8.2 Jessie i386 CPU Intel
KDE Plasma Desktop Manager
View 0 Replies
View Related
Mar 11, 2010
If my webcam is plugged in when I start up my computer, it ends up being the only thing I can use -- I can't switch off of it in tvtime. If I leave it unplugged and restart my computer, I can then use my TV tuner card.
View 1 Replies
View Related
Mar 29, 2010
Ubuntu version: Karmic Koala (ubuntu 9.10)I've been fiddling arround quite some time with this card. So far i established the following:
1. Card is supported by drivers already available in kernel (v4l, v4l(2)).
2. Card is recognised by Skype as well as by gstreamer. However gstreamer gives me mostly greeen screen when i test it. no propper picture. both found it on video1 (video0 is webcam).
3. I know it is supposed to work well in Linux URL...instructions are for fedora here.
4. there are quite a few tutorial for this card online (even ubuntu), however they are for older version and most of them consist of getting new drivers installed (which are already included with Karmic).
TV Time - blank screen - it is trying to get video from video0 device, which is webcam. i can not set it to use video1 instead as when i click in the menu to change input nothing happens.VLC player - i select use device and set it to V4l or PVR. in both cases the programme itself switches to video0 and turns on my webcam. Nothing else happens. I also installed iv-tv including all necessary libraries and dependancies - as suggested as solution to similar model of card. Didn't change anyhting. it's basically the only thing that is not working yet (most other things i already solved-sort of). I am also interested why the programmes keep switching automaticly to video0 for input when i clearly state to them to use video1?!If this can not be solved can anyone suggest another cheap TV tunner that "just works" in Ubuntu (including remote control)?! I have a big monitor and i think i could use it as TV instead of getting a new TV....
View 2 Replies
View Related
Apr 3, 2010
Does anyone know of any way to get this thing to work on Karmic? Just to be able to watch TV, not even to record? I can't seem to get it to recognize it. lsusb just shows:
Code: Bus 001 Device 006: ID 0438:b003 Advanced Micro Devices, Inc. but it doesn't show up in dev/video0 or anything like that, and I don't know of a program which will play it. I don't really have the money to go out and buy another tv tuner, so I really would like to get this one to work, or else I'm going to have to switch to windows
View 9 Replies
View Related
Apr 26, 2010
No progress viewing input yet in Linux. I installed MythTV, VLC, and no luck yet with vids or sound.I had video input with Windows Movie Maker, and Media Player Classic (3rd party), but no sound in either.
View 9 Replies
View Related
May 6, 2010
I never got that card to work In Ubuntu , this is how i`m plugged in from my setop box by coax cable to my tv tuner card . In windows i have no problem using the drivers provided by compro. It would be really cool if i got that card working in Ubuntu
View 9 Replies
View Related