Ubuntu Multimedia :: Tv Tuner Not Working
May 6, 2011I have compro videomate m330f tv card recognised as Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
[Code]....
ADVERTISEMENT
Ubuntu Multimedia :: TV Tuner Not Working In 9.10 But Is Recognised
Mar 29, 2010Ubuntu version: Karmic Koala (ubuntu 9.10)I've been fiddling arround quite some time with this card. So far i established the following:
1. Card is supported by drivers already available in kernel (v4l, v4l(2)).
2. Card is recognised by Skype as well as by gstreamer. However gstreamer gives me mostly greeen screen when i test it. no propper picture. both found it on video1 (video0 is webcam).
3. I know it is supposed to work well in Linux URL...instructions are for fedora here.
4. there are quite a few tutorial for this card online (even ubuntu), however they are for older version and most of them consist of getting new drivers installed (which are already included with Karmic).
TV Time - blank screen - it is trying to get video from video0 device, which is webcam. i can not set it to use video1 instead as when i click in the menu to change input nothing happens.VLC player - i select use device and set it to V4l or PVR. in both cases the programme itself switches to video0 and turns on my webcam. Nothing else happens. I also installed iv-tv including all necessary libraries and dependancies - as suggested as solution to similar model of card. Didn't change anyhting. it's basically the only thing that is not working yet (most other things i already solved-sort of). I am also interested why the programmes keep switching automaticly to video0 for input when i clearly state to them to use video1?!If this can not be solved can anyone suggest another cheap TV tunner that "just works" in Ubuntu (including remote control)?! I have a big monitor and i think i could use it as TV instead of getting a new TV....
Ubuntu Multimedia :: GT-P5100 Tv Tuner Not Working
Nov 10, 2010I am trying to get a tv tuner type GT-P5100 to work in Kubuntu but I have no luck. The type of tv tunner is: [URL] I checked [URL] and there is no page for this kind of tuner. I've compiled [URL] and it worked, but in tvtime I get no image. Is there another way to test if my tv tuner is working? I have no entry in /dev/dvb A relevant part of dmesg is:
[Code]....
Ubuntu Multimedia :: Cannot Find / Download Working Tuner?
Jul 18, 2011I've looked around and can't find a working tuner for Ubuntu, online ones don't work and the ones I've downloaded I can't seem to get to pick up a sound.
View 7 Replies View RelatedUbuntu Multimedia :: Get A Compro T100 Tuner Working With MythTv?
Jan 29, 2010I'm trying to get a Compro T100 tuner working with MythTv, but it shows up as a T750
>lspci gives:
Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Subsystem: Compro Technology, Inc. Device [185b:c900]
[code]....
Ubuntu Multimedia :: Tv Tuner Card: (Vivanco PCI EASY BG / DK) Not Working
Jul 27, 2010I have an almost noname tv tuner card: Vivanco PCI EASY BG/DK. Lspci says it is Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01). Dmesg detected it as a LifeView FlyVIDEO3000. I tried to configure it making the file at /etc/modprobe.d with the options card=2 tuner=5 (I found that also in dmesg). Still TvTime can't find any channels. I also tried using xawtv and scantv, but only managed to find two channels using ntsc somehow, but I have PAL BG/DK. (the card itself works on Windows, but it took me a while to configure the channels properly)
View 4 Replies View RelatedUbuntu :: LifeView 3000 Tv-tuner Not Working
Mar 24, 2011i love linux, everything 'bout it, and i'll gladly switch to it, but I have only one little problem. On windows i usually watch tv on my computer (and i play my xbox 360 too ) using a LifeView 3000 TvTuner.
View 1 Replies View RelatedUbuntu Multimedia :: Install A TV Tuner RPC-TV-PCI-FM In 9.10?
Feb 2, 2010How do I install a TV tuner RPC-TV-PCI-FM in Ubuntu 9.10?I searched on various forums, but I do not found, how to set this model of tv tuner.
View 4 Replies View RelatedUbuntu Multimedia :: Choosing A DVB-T USB Tuner?
Nov 23, 2010what DVB-T USB tuner should I buy? I expect it to have full support including the remote control operation. Intended use is for Ubuntu with XBMC installed.
View 3 Replies View RelatedUbuntu Multimedia :: TV Tuner Card For PC ?
Apr 1, 2011I haven't had one for years, so i am not even really sure what options to look for. So i need to be able to stream media, record media, record cable box, play cable box, listen to local FM radio would be really nice.
View 1 Replies View RelatedUbuntu Multimedia :: Get Ati TV Wonder 650 Tv Tuner Work On Karmic
Apr 3, 2010Does anyone know of any way to get this thing to work on Karmic? Just to be able to watch TV, not even to record? I can't seem to get it to recognize it. lsusb just shows:
Code: Bus 001 Device 006: ID 0438:b003 Advanced Micro Devices, Inc. but it doesn't show up in dev/video0 or anything like that, and I don't know of a program which will play it. I don't really have the money to go out and buy another tv tuner, so I really would like to get this one to work, or else I'm going to have to switch to windows
Ubuntu Multimedia :: Viewing/recording With New TV Tuner?
Apr 26, 2010No progress viewing input yet in Linux. I installed MythTV, VLC, and no luck yet with vids or sound.I had video input with Windows Movie Maker, and Media Player Classic (3rd party), but no sound in either.
View 9 Replies View RelatedUbuntu Multimedia :: TV - Tuner Compro Videomate TV PVR / FM?
May 6, 2010I never got that card to work In Ubuntu , this is how i`m plugged in from my setop box by coax cable to my tv tuner card . In windows i have no problem using the drivers provided by compro. It would be really cool if i got that card working in Ubuntu
View 9 Replies View RelatedUbuntu Multimedia :: Compro M1F TV Tuner 10.10 No Sound
Nov 6, 2010I have a Compro Videomate M1F TV tuner card (internal PCI). After installing ubuntu 10.10 I noticed my card was not recognized and tvtime showed no image no sound. After a Google search, I found differente threads and I tried the following: I've created saa1734.conf in directory /etc/modprobe.d (with administrative rights) with these lines:
Quote:
alias char-major-81 videodev
alias char-major-81-0 saa7134
options i2c-algo-bit bit_test=1
options saa7134 card=99 tuner=59 secam=dk
options tuner secam=d
After that, I rebooted the computer and after starting tvtime, I can see all the tv channels (great) but I have No SOUND and I don't know how to deal with that and couldn't find a solution.I know there is a problem with OSS not being supported anymore or something like that and I am a bit confused.
Quote:
03:06.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
Kernel Version: 2.6.35-22-generic
Ubuntu Multimedia :: TV Tuner Isnt Detected?
Dec 27, 2010I just got a Diamond ATI TV Wonder HD 750 USB, but it appears as though my 10.04 wont detect it. Myth cant find it. I tried to install it on my other comp running 10.10 but no dice. Anyone know of a way to get this Tv tuner card working in Ubuntu?
View 9 Replies View RelatedUbuntu Multimedia :: Install TV Tuner For A Laptop?
Feb 1, 2011I want to use my laptop for watching cable TV and as a DVR. I need to buy a TV tuner card for the laptop. What I want to know is what brands and cards work with Ubuntu 10.04? Are they easy to install or so I need to be a CLI geek to make it work?
View 2 Replies View RelatedUbuntu Multimedia :: Can't Change Tv Card Tuner?
Feb 20, 2011I have 2 tv cards that I have successfully configured to work in linux.But this 3rd one I bought recently seems to have a problem. The card is not autodetcted (that's really not the problem) but when I try to load saa7134 with:sudo modprobe saa7134 card=xx tuner=xx, it loads whatever card I indicate but the tuner never changes. This is part of the output of dmesg:
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.15 loaded
saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[code]....
Ubuntu Multimedia :: TV Tuner Card No Audio?
Jun 2, 2011I have a pinnacle 800i that i just setup and video to work which was a pain but now i cant get audio to work.
View 3 Replies View RelatedUbuntu Multimedia :: Webcam And Tv Tuner Don't Work?
Jul 18, 2011My tv tuners works under vlc only, my webcam only works in vlc and xaw tv, I tried skype and it didn't detect either one. However in Puppy Linux both of these worked flawlessly, they were both detected in skype. here's v4l-info.
Code:
### v4l2 device info [/dev/video0] ###
general info
VIDIOC_QUERYCAP[code]....
There is also a /dev/video2 but when I try v4l-info /dev/video2 the terminal hangs and I have to close it out. Also I've tried.
Code:
LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so skype
It didn't work. Also gstreamer-properties doesn't start. I don't know if it's related or not.The first was that I couldn't even get it to boot off of the cd in order to install it, I had to use a usb.
Ubuntu Multimedia :: Setup Tv Tuner Card With Vlc?
Sep 1, 2011I have a sabrent tv tuner card (tv-pcirc). I want to use it in vlc but don't know how to change from the composite source to the tuner source and from there don't know how to change channels (is there a program that generates channels.conf for analog channels?) It would also like to know how to record a certain channel for a certain period via the telnet interface. Another thing I would like to know is how to set up the remote with it, because the audio is very soft and I would like to raise the voume.
My card is using card=42 tuner=43.
Ubuntu Multimedia :: How To Install Intex Tv Tuner Card
Feb 5, 2010How do i install intex tv tuner card (PCI ver 2.1) on ubuntu 9.01 I have installed myth tv my problem is which card do i select i selected Analog card and MJPG as well but when i go to scan for channels says FAILED TO OPEN CARD.
View 1 Replies View RelatedUbuntu Multimedia :: ATI All-In-Wonder Radeon 9000 TV Tuner No Sound
Mar 14, 2010I have an ATI All-In-Wonder 9000 AGP4x video card with TV tuner function. I following the description on [URL] where I found a how-to for enabling TV tuner. The tuner works in xawtv and avview but without sound. I plugged the cable in from tuner to my sound card and try to increase volume and/or enable mute on/off but nothing to hear. The sound card line-in input works correctly, because when I attaching my MP3 player I hear sound over the sound card. I think maybe have a register accessing/writing error which handle the TV Tuner sound chips to turn on/off. (the tuner works correctly in Windows XP). I'm using Ubuntu 8.04.4 LTS with x86_64 (amd64) actually. The lspci output for Video Card:
[Code]....
Ubuntu Multimedia :: Kaiser Baas Tuner Not Recognised
Jul 16, 2010I have recently purchased a Kaiser Baas tuner card with a model number of KBA01010, it does not matter which package I use non of them can see the tuner card. I have tried kaffine and myTV, but ultimately I would like to get this device working with my mythtv installation.I have followed alot of threads suggesting updated firmware etc but still no luck. By the output from the dmesg I am guessing the firware on the card is different from past cards.
View 1 Replies View RelatedUbuntu Multimedia :: Pinnacle 800e Dtv Tuner, /dev/dvb/* Missing?
Oct 4, 2010I am trying to get a Pinnacle 800e USB ATSC digital TV tuner working in 64-bit Lucid. I followed the 800e wiki for extracting the firmware file that needs to be in /lib/firmware, so dmesg output recognizes it without errors just like shown in the wiki. No idea what modules it should use, but seem to be loaded:
Code:
Module Size Used by
lgdt330x 9070 0
[code]....
Ubuntu Multimedia :: Tv Tuner Won't Work After Unplugging And Replugging?
Oct 22, 2010After much effort I got mythtv to work on my HP TouchSmart. Then I decided to install it on my laptop before I forgot all the troubleshooting tricks.So I unplugged my Hauppauge WinTV-HVR 850 from the TouchSmart and plugged it in the laptop. I was successful getting mythtv running on the laptop so I returned the tv tuner to the TouchSmart.Much to my dismay, mythtv no longer worked on the TouchSmart. I moved the tuner to the laptop again to see if mythtv worked. It didn't. Apparently, the act of unplugging the tuner and plugging it back in broke something.
For usb hard drives and cameras, an icon appears on the desktop that allows me to right click and choose to safely remove the device. I had no idea that unplugging a usb device without such an icon would cause any problems.Initially, the problem seemed to be with mythtv as I was able to successfully execute the following commands:
Code:
scan -x0 /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
mplayer dvb://WTVF-HD
[code]....
Ubuntu Multimedia :: How To Configure INTEX TV Tuner Card
Dec 24, 2010I have INTEX TV tuner card. i'm trying to configure in ubuntu for tvtime. The card has the saa7130 or saa7134 philipse chipset.
lspci | grep -i saa713
output:
Code:
00:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
after the installation, the card was detected and /dev/video0 was created but dmesg indicated that the card is not among the ones listed as supported and since card did not have EEPROM, the card was not up and running right away.i have edited /etc/modprobe.d/tvcard.conf and added options saa7134 card=3 tuner=14
Code:
$sudo nano /etc/modprobe.d/tvcard.conf
added:
Code:
options saa7134 card=3 tuner=14
Then CTRL+X to exit
still it did not work. tvtime would always say no signal and tvtime-scanner never picked up any channels. then i followed instruction given by rsramkee [URL]. edited saa7134-cards.c and deployed new kernel linux-2.6.36.2 with changes.i rebooted machine to windows selected one channel in tv tuner software of windows, again rebooted machine to ubuntu (i have dual boot windows XP and ubuntu 2.6.35.23). tvtime able display video of channel that is selected in windows OS (No sound), but not be able to tune any other stations.In mplayer able display video of channel that is selected in windows OS with sound.
command:
Code:
mplayer tv:// -tv driver=v4l2:chanlist=us-cable:alsa:adevice=hw.0,1:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:norm=PAL
i followed instruction given by http://linuxtv.org/wiki/index.php/Saa7134-alsa to set up sound. loading the loopback module with the command:
$ pactl load-module module-loopback
Now tvtime able display video of channel that is selected in windows OS with sound, but not be able to tune any other stations. Not be able to tune any stations.dmesg output:
Code:
[ 1320.568603] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 1320.568697] saa7130[0]: found at 0000:00:0a.0, rev: 1, irq: 18, latency: 32, mmio: 0xdffff800
[ 1320.568737] saa7130[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000 [card=2,insmod option]
[code]...
i'm not be able to tune any stations using tvtime and xawtv. if channel is not selected in windows OS for more then 1 hour then tvtime displays message no signal, same message in tvtime-scaner (No sound).
Ubuntu Multimedia :: TV Tuner Card - Unable To Get Video
Mar 29, 2011I have a Phillips SAA7130 TV Tunner card and seems to have installed correctly. I have Xaw TV program on Ubuntu 10.10. I am unable to get the Video. I tried 3 players and in none I am able to see the video. The source in all programs says 'Default' and am unable to choose the card as source. I am also ok to allow remote login to check.
View 7 Replies View RelatedUbuntu Multimedia :: Does Anybody Use USB HDTV (digital Or Hybrid) Tuner?
Sep 1, 2011Does anybody use USB HDTV (digital or hybrid) tuner ?
1) does teletext work in digital TV ?
- Do teletext pages appear immediately after page numbers entering or
- must you wait every time because of counter rewinding ?
2) Does analog FM radio (88 - 108 MHz) work in that kind tuners ?
Ubuntu Multimedia :: Configure Generic Remote That Came With A TV Tuner Card
Jan 18, 2010I've been trying to configure this generic remote that came with a TV tuner card (saa7134) a while ago but I haven't been able to do so. The thing is that the remote works, in fact some buttons are recognized properly... but some are not. I'm not using lirc!, from I have been reading there is support for generic remotes in the 2.6.31 kernel, besides, i can't configure lirc, it doesn't let me load the kernel modules to start up the daemon for the ir. is there a config file for the button mapping of the native remote support in kernel 2.6.31?. Been searching it but couldn't find it.
View 5 Replies View RelatedUbuntu Multimedia :: Af9015 DVB-T Tuner Fails To Tune / Solve This?
Mar 12, 2010I've downloaded the firmware from http://www.otit.fi/~crope/v4l-dvb/af..._files/4.95.0/ and placed it in /lib/firmware. I'm using Karmic. MythTV and Kaffeine both see the devices. They attempt to tune but I can't get any channels out because they can't tune.
View 3 Replies View Related
