I have a PEAK 102569AGPK that I can't get to play nice.
Using Ubuntu Netbook 10.10
lsusb-v gives this:
But no driver is being found - dmesg: usb 1-1: new high speed USB device using ehci_hcd and address 6
Works well under windows, which identifies it as an rtl2832u. I've tried installing Realtek-provided drivers, but still device is not found.
I have a server in a data centre, which is supposed to have a 100Mbit line. Peak rates at the moment on my server are in the region of 20Mb, which should be easily handled. Is there anyway I can trace how much more bandwidth is available at any one time or if things are becoming sluggish on the server?
View 4 Replies View RelatedI would like to find something like `time' command:$ magic_command ./executable...memory peak: 100kb
View 2 Replies View RelatedI'm wondering if I could get the sound peak level value at a certain time in decibels or percentage using the terminal through a command line ? Is there a feature for ALSA that could allow me to do that ? or is there a piece of software that runs in a terminal that could do that ?
View 3 Replies View RelatedHow i can know processor utilization during peak period in rhel 5.3.
View 5 Replies View RelatedMy server crashed last week and I'm trying to diagnose why. /var/log/messages contains the following error messages, which indicate that the server's memory peaked. I would like to discover what process caused the memory peak. Being that "httpd invoked oom-killer", can I conclude that httpd was the cause of the memory peak?
[code]....
Last week my server crashed. I'm trying to diagnose the cause.
This is the relevant error message in /var/log/messages:
Code:
I'm assuming that I can conclude, then, that apache/httpd was the cause of the memory leak?
Next, I've been tracking my memory usage. Using top, this is an average memory load level for my server:
Code:
I'd like to confirm if my understanding of this data is correct, because Plesk indicates that my memory usage is only 50% or less. (Though I have read a number of reports indicating that Plesk's measurements are frequently wrong.)
Top says: Of the 2,073,156K total memory, 1,982,572K (95.63%) is being used, 90,584K (4.37%) is free. Of that sum, 421,948K (20.35%) are being used as buffers. Additionally, of the 2,096,472K of Swap, 60K is used, and 887,700K (42.34%) is cached.
My questions: Is my memory actually being 95% used? Or is the buffered quantity (20.35%) not a use of physical/virtual memory? (i.e. is it disk usage?) Does the amount of cached Swap influence the percentage of physical/virtual memory being used?
In other words, who is correct? Plesk says I'm using 40-50% of my memory, whereas top says 85-95%.
In our company, we have one server with kernel, 2.6.18. because of our neads, we had to buy new hard disk,that slax live cd detects that as "Ibex Peak 2 port SATA IDE Controlle".Apparently this kernel does not support this device.Unfortunately according to our policy(definitely some dependency on company's softwares installed on this kernel) we can not upgrade our kernel.
View 1 Replies View Relatedwhat do I need to install to get a USB tv tuner working? I have a generic usb "stick". It shows up in windows as a 7240 TVBox. I've tried mythtv, but it doesn't see or show the device. I am running Ubuntu 9.1.
View 8 Replies View RelatedI've got a Gigabyte TV Tuner card which provides software/player for windows only. Does anyone know how to make it work on ubuntu too, please? It's Gigabyte GT-P6000.
View 7 Replies View RelatedI am trying to install a Hauppauge PVR-150 into my CentOS 5 machine. When the card is installed, I get the error "Disabling IRQ #5" upon startup, and the machine loses networking. Does anyone know why I'm receiving this error?
View 14 Replies View RelatedI am using prolink pixel view USB tv tuner. How i can watch TV & configure the USB TV tuner. How I can detect my usb tv tuner. Its work fine in Windows. Now I had installed Open Suse 11.3 .
View 1 Replies View RelatedHow do I install a TV tuner RPC-TV-PCI-FM in Ubuntu 9.10?I searched on various forums, but I do not found, how to set this model of tv tuner.
View 4 Replies View Relatedwhat DVB-T USB tuner should I buy? I expect it to have full support including the remote control operation. Intended use is for Ubuntu with XBMC installed.
View 3 Replies View RelatedI haven't had one for years, so i am not even really sure what options to look for. So i need to be able to stream media, record media, record cable box, play cable box, listen to local FM radio would be really nice.
View 1 Replies View RelatedI have compro videomate m330f tv card recognised as Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
[Code]....
I am needing a tv tuner card that is compatible with linux. My tv went out so i need to be able to hook up my directv receiver to the card.
View 10 Replies View RelatedI think the subject title says it all, but well... that's what I would like to do, to buy a TV tuner with support for HD resolution (although I'll be working with a 15.6" 16:9 1366x768 display, laptop one) to hook up a PS3 and not having to spend some extra cash on a display (ideally).
Can anyone give me a hint on this? The only 'premise' I ideally pursue is for the device to fully work, I mean... fuck DVB-T per se, I'm not interested in TV reception, just to put the A/V signal out of the PS3 and onto the tuner and use a program like tvtime (ideally), but something that can work reliably (even if I have to grab a tarball or a cvs/svn/git tree and compile it myself, as I use a custom-made+deviated CLFS/LFS distro, I'm more than accustomed to compile everything by hand).
I have a generic saa7134 PCI TV Tuner branded as Encore without a radio. Recently I got it working on xawtv (with a pcm error delayed sound and TVTime (no sound? unless executed a record <parameters>. Now, i want to use that TV Tuner in GNU Radio GQRX-SDR to listen or receive NOAA APT transmission, but the problem is I don't know how to get it done. I tried to research but nothing came up with my configuration. I dont have any other USB SDR so Im just using the PCI TV Tuner. Any other ways to resolve the delayed sound in xawtv/arecord? Im using the saa7134-alsa. Any other software to manually set the frequency of the TV Tuner in the NOAA freq 137.xMHz so I can just record it using any application.
Additional info:
I am using Debian GNU/Linux 8.2 Jessie i386 CPU Intel
KDE Plasma Desktop Manager
i have a pinnacle hybrid pro 302e usb tuner. the sound is played with arecord accessing the device and aplay playing it. the video by tvtime.the channel National Geographic comes at 719.25Mhz in my analog cable tv input.I AM GETTING HUGE amount of crackling and squealing noise from this channel. There are a few other channels like star movies at 83.50Mhz which has similar bad sound.i know it might have to do with reception but can you suggest something i can do to pre process the sound before its played so as to reduce the artifacts (video is okay).
View 2 Replies View RelatedI only use windows to watch TV on my tuner. If i can find one for Linux i would never use WINBLOWS again. I have a ViXS Pure TV-U 48B0 (NTSC/ATSC Combo) Any scripts they i can run to use this tuner. What a good TV Tuner or a list of TV tuner that work with linux. I love how alot of companys dont support us linux users huh.
View 9 Replies View Relatedconfigure tvtuner on Fedora 14. I have an old analog tv tuner with saa7134 chipset and trying to connect it with cable tv, after quick google-ing i read that the driver for this model are included in the kernel by default, but when i open tvtime i get the following error:
View 5 Replies View RelatedIf my webcam is plugged in when I start up my computer, it ends up being the only thing I can use -- I can't switch off of it in tvtime. If I leave it unplugged and restart my computer, I can then use my TV tuner card.
View 1 Replies View RelatedUbuntu version: Karmic Koala (ubuntu 9.10)I've been fiddling arround quite some time with this card. So far i established the following:
1. Card is supported by drivers already available in kernel (v4l, v4l(2)).
2. Card is recognised by Skype as well as by gstreamer. However gstreamer gives me mostly greeen screen when i test it. no propper picture. both found it on video1 (video0 is webcam).
3. I know it is supposed to work well in Linux URL...instructions are for fedora here.
4. there are quite a few tutorial for this card online (even ubuntu), however they are for older version and most of them consist of getting new drivers installed (which are already included with Karmic).
TV Time - blank screen - it is trying to get video from video0 device, which is webcam. i can not set it to use video1 instead as when i click in the menu to change input nothing happens.VLC player - i select use device and set it to V4l or PVR. in both cases the programme itself switches to video0 and turns on my webcam. Nothing else happens. I also installed iv-tv including all necessary libraries and dependancies - as suggested as solution to similar model of card. Didn't change anyhting. it's basically the only thing that is not working yet (most other things i already solved-sort of). I am also interested why the programmes keep switching automaticly to video0 for input when i clearly state to them to use video1?!If this can not be solved can anyone suggest another cheap TV tunner that "just works" in Ubuntu (including remote control)?! I have a big monitor and i think i could use it as TV instead of getting a new TV....
Does anyone know of any way to get this thing to work on Karmic? Just to be able to watch TV, not even to record? I can't seem to get it to recognize it. lsusb just shows:
Code: Bus 001 Device 006: ID 0438:b003 Advanced Micro Devices, Inc. but it doesn't show up in dev/video0 or anything like that, and I don't know of a program which will play it. I don't really have the money to go out and buy another tv tuner, so I really would like to get this one to work, or else I'm going to have to switch to windows
No progress viewing input yet in Linux. I installed MythTV, VLC, and no luck yet with vids or sound.I had video input with Windows Movie Maker, and Media Player Classic (3rd party), but no sound in either.
View 9 Replies View RelatedI never got that card to work In Ubuntu , this is how i`m plugged in from my setop box by coax cable to my tv tuner card . In windows i have no problem using the drivers provided by compro. It would be really cool if i got that card working in Ubuntu
View 9 Replies View RelatedI have an HP HDX18 ubuntu Lucid, I can't make ubuntu work with this tuner,
View 1 Replies View RelatedI have a Compro Videomate M1F TV tuner card (internal PCI). After installing ubuntu 10.10 I noticed my card was not recognized and tvtime showed no image no sound. After a Google search, I found differente threads and I tried the following: I've created saa1734.conf in directory /etc/modprobe.d (with administrative rights) with these lines:
Quote:
alias char-major-81 videodev
alias char-major-81-0 saa7134
options i2c-algo-bit bit_test=1
options saa7134 card=99 tuner=59 secam=dk
options tuner secam=d
After that, I rebooted the computer and after starting tvtime, I can see all the tv channels (great) but I have No SOUND and I don't know how to deal with that and couldn't find a solution.I know there is a problem with OSS not being supported anymore or something like that and I am a bit confused.
Quote:
03:06.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
Kernel Version: 2.6.35-22-generic
I am trying to get a tv tuner type GT-P5100 to work in Kubuntu but I have no luck. The type of tv tunner is: [URL] I checked [URL] and there is no page for this kind of tuner. I've compiled [URL] and it worked, but in tvtime I get no image. Is there another way to test if my tv tuner is working? I have no entry in /dev/dvb A relevant part of dmesg is:
[Code]....