i currently got a new laptop. it has linux ubuntu installed in it. the sticker that is attached to the pc which says pentium dual core, while the price list that comes with specification has core 2 duo. how can i check the hardware specification using linux ubuntu.
View 2 RepliesWhenever you try to install Ubuntu 10.04 Desktop Edition does not accept me (knowing that the original CD)
Specification of the device is very high
I wanted to install Ubuntu 10.10 on my netbook Samsung N150 but the installation from the pendrive freezes after the partition table specification, both in the case of the manual specification and in the case of the automatic path. I (think correctly..) specified 35 GB of ext4 journ (but I tried also with ext3 journ) and 1GB of swap but when I confirm these specs the installation freeze yet at the "Searching for the file system" (I use a localized lang but I think this is a quite literal translation), when I'm asked for the time zone
View 9 Replies View RelatedKernel 2.6.21.5, Slackware 12.0...I have a 2.0 USB device at /dev/sda1. How can I know if my system is using the 2.0 specification?
View 2 Replies View Relatedhow to know specification of my machine on linux redhat 5?like the size of harddesk and free space on it
Ram , VGA , and so on.
I would like to copy a file from some random folder and send to a "Test" folder in root directory. But I havn't found how to specify the root directory without using ../ until i reach the root directory.i.e. suppose I'm in my random folder where I want to copy my file sudo cp somefile.txt (root???)/Test
what do i put for root?Just as additional explanation, if I have a Test folder in my home directory that i wanted to transfer to, then i could simply do cp somefile.txt $HOME/Test.
How do I find the complete specification listing for my RAM? I am getting ready to order another card--need to know what to order.
View 3 Replies View RelatedFedora 14 xfce
HP Mini 210
I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:
[Code].....
I am new to Debian but not Linux-based systems. I have been experimenting a lot with Debian Lenny/Squeeze. I am growing more comfortable each day with the Debian design. Yet there remain many unexplored areas. I am creating a migration check list. Things to check, prepare, or reconfigure when moving from one Linux-based system to Debian.
I have a good computer background and my current check list probably is fairly good. Yet I would appreciate input and opinions from experienced Debian users of things to watch in such a migration. Login defs, passwd/group files, different directory locations, keymaps, services and daemons, etc. I am not too concerned with the desktop as I plan to stick with KDE 3.5 for a while and I can basically move those settings across.
I want to put check menu & check list in utility dialog.i dont know how i do this
View 1 Replies View RelatedI need something like that
Code:
checkip 192.168.3.44 >> ip.txt
ip.txt: ON!
And with that i wish to see if my sister's computer is connected to the internet.
A ping based solution is ok but i need things like returning 0 for pc not connected to internet and 1 otherwise.
i was just wondering where can i check to make sure what bit system i am running. 32 or 64,
View 4 Replies View RelatedI have a Ubuntu box with a ftp service on. I wanto to upload/download files from my Win XP connected via LAN. I tried ftp command from cmd but I received "Error 530. Login incorrect. Login failed".I'm using root, I am 100% sure about the password (I managed to connect via putty), I just wonder how I can check the ftp connection from xp to ubuntu... maybe a firewall is blocking the port 21?I also tried ftp command in ubuntu (when I was connected with putty) and I got "connection refused" error.
View 3 Replies View Relatedi want check md5 from win xp my friend use winMd5Sum it is good program ?
View 1 Replies View RelatedI clicked "Safely remove hardware" (not sure if it's right - using Russian version..). It's right above Properties (right-clicking on the disk in Computer). So, I want to get it back. How do I do that? Also, how do I check the SD for errors?
View 2 Replies View Relatedi know: but I downloaded the 11.04iso but it says in the shutdown screen that its 10.04... :/
View 4 Replies View Relatedcan anyone advise how can I check what is the format (FTS/NFTS) my ubuntu is using? I need to ensure that mysql db can grow above 4gb
View 3 Replies View RelatedMy netbook running ubuntu 10.04 seems to be constantly transmiting data to the internet at about 100 kib when I am not even on the internet ? Is there a way to check what is being sent and how can I check if my netbook has been hijacked ?
Kev
I was running transmission in the background and I hadn't noticed. As soon as I turned transmission off the internet went static.
Yesterday I have replaced my Athlon64 3000+ with an Athlon64 4000+ on an Asus A8V Deluxe motherboard with 2 GB RAM and a 6600GT.
(I have built my own core-i5 based machine a few weeks ago, just to show that I am not living in the past when it comes to PC hardware ).
In WinXP (dual boot with Ubuntu), the idle core temperature is (on average) 40C (104F) with Q-Fan enabled in the BIOS. (Isn't this a bit high?) With AMD's "Cool'n'Quiet" enabled and "Q-Fan" disabled in the BIOS, the CPU fan makes too much noise (for my taste). With both "Cool'n'Quiet" and "Q-Fan" enabled, the idle core temp is (on avarage) 27C (80.6F). The CPU speed drops to 1 GHz (instead of the 4000+'s 2.4 GHz).
This is all according to the Windows program "CoreTemp", and with the original, stock heatsink. I was struggling with a "Freezer 64 Pro" that came with the 4000+, and just ended up putting the stock cooler back on it (took 10 seconds).
To get to the point: how can I measure the temperature of my "new" (second-hand) CPU in Ubuntu?
Does an OS influence the temperature of a CPU?
I have searched and read about "conky" (which according to Synaptic is installed on my 10.04 system, but I don't see it in the start menu), but it doesn't seem to be/do what I am looking for.
when i open update manager, i click check for updates, than i get this:
W:Failed to fetch http://archive.canonical.com/ubuntu/...source/Sources 404 Not Found
, W:Failed to fetch http://archive.canonical.com/ubuntu/...-i386/Packages 404 Not Found
[Code]....
So I would like to check out my cpu temperature in function of time. I've followed [URL]...gpu-en-ubuntu/ but unfortunately in the description it was for the old version of Ubuntu and despite having downloaded the program, I simply can't add it in the taskbar. I did in a terminal: sudo apt-get install sensors-applet. Then I installed a few remaining packets from synaptic. Now how do I run the program?
View 6 Replies View RelatedI search for a Gui program that running and check of the hard disk and monsters in graphical mode bad
sectors.
I can see what Firestarter is blocking in the Firestarter/Events tab, but after reading all the man pages of UFW, I still don't know how to check what the UFW is blocking.
View 9 Replies View RelatedI need to install Mercurial, and i want to do it through the shell. Yesterday i tried it, but i got the 1.1.5 version (something like that),but i need the newest version.How can i check the version of the package being downloaded (or about to be) and/or get the newest version?
View 4 Replies View RelatedI just dloaded ubuntu 10.04 iso, i used firefox and on the way i had to pause n start for about 5 times, when i burned the iso with brasero and booted from it I got an error, but recently I have burned discs with my burner and they never work. So how do i check if the iso is correct or not
View 9 Replies View RelatedI opened Evolution to send an email, and up popped this warning: What's more, I can't get rid of the warning: clicking Cancel does no good, nor clicking the X in the corner of the box. And if I try to close it via the "Window Menu" at the top left corner of the box, Close does nothing. I haven't tried clicking OK, because I don't know what I'd be agreeing to.
View 3 Replies View RelatedJust a little thing to make my Lynx Lucid installation perfect
I find it annoying when using Aspell in Evolution to have to check through the whole text before I arrive on the word that I need to check. Of course Aspell goes through all the headers in the email etc.
Is there any other alternative, or way of setting up the spelling preferences to make it possible to highlight a word and check it directly (like for instance Thunderbird does on other not to be mentioned systems)?
I have a epson sx100 and i can't check my ink levels with esputil. This is what i get when i type the command.
pianoterra@pianoterra-desktop:~$ sudo escputil -r /dev/usblp0 -s
Escputil version 5.2.0-rc1, Copyright (C) 2000-2006 Robert Krawitz
Escputil comes with ABSOLUTELY NO WARRANTY; for details type 'escputil -l'
[Code].....
I also have another problem which is i can't change the permissions of /dev/usblp0 because i stupidly changed them in to read write execute to all using chmod 777 without thinking that the device file isn't executable. Why can't i change the permissions back as they were?
How to check whether ssh is running or not ? (I have install ssh)
If not how to make it run ?
I was just curious if there was an easy way to check if a window is maximized in terminal (preferably with wmctrl and not by checking the x,y dimensions of said window)?
View 1 Replies View Related