How to use gcc compiler with matlab. Matlab can only take advantage of gcc 4.3.4, whereas in fedora 14 we use 4.5.1. Unfortunately I could not find an older version of gcc in repositories. Is there a way to downgrade gcc without creting problems to the overall function of my fedora machine?
View 9 RepliesFor my project they asked me to install Fedora 11 and unfortunately I installed Fedora 13, is there any way you can downgrade to Fedora 11?
View 2 Replies View RelatedI'm unable to compile ruby 1.9.X and I found out it was related to openssl, although it seems there's a patch available for ruby I don't know how to apply it so I was thinking on downgrading to openssl 0.9.8n
I'm using F13 btw, I'm still posting it here as openssl 1.0.0 was first introduced on F12, the other major distros are still using openssl 0.9.8k so there's no much information on the problem
As I have not been able to resolve the problems with BackupPC after the upgrade (see post [URL]) it seems that my best option is to restore my system to the state when it was working OK and then do an upgrade to F13. I did a clean install when I upgraded to F12 and took the opportunity to reconfigure the disks to include some new drives into the RAID and LVM.
This means that the disks and partitions are not the same as when I was last running F10. I have the dumps taken at that time so I propose to install F10 from the DVD into the new structure and then restore the partitions from the dumps under single user. The new partitions are formatted ext4 and previously they were ext3, not sure if F10 supported ext4.
I know that there will be some directories and files which I must not overwrite:
/etc/fstab
/dev
some parts of /boot
I can do this with restore -i.
I am using Fedora12 and I'm running the radeon graphics driver, my card is ATi 8500 Radeon and I can't play hardly any games or use applications that require 3D Acceleration. The catalyst driver that I need for my ATi is too old to support Fedora 12 Xorg.is there a way to downgrade Xorg so I can install my cards drivers?
If there is how can I do this. If I run a 3D game of any kind It either works for a while and locks up the system where I can't even telnet into it to shut it down, or it won't start the game or App. I know I have some acceleration due to my glx gears, I could get into great detail of what I can and can't do.
Bottom line is since the video card is too old, not even the generic radeon driver allows me full freedom so there must be a way to install the other X.org without breakage
Code:
GL_RENDERER = Mesa DRI R200 (R200 514C) 20090101 AGP 4x TCL
GL_VERSION = 1.3 Mesa 7.7.1-DEVEL
GL_VENDOR = Tungsten Graphics, Inc.
[code]....
The R200 Radeon driver for my ATi in Fedora12 is not fully compatible with my video card, I was told this on an IRC channel a while ago, I think it stopped at Radeon 9600 ATi.
How to downgrade Linux kernel Now I am using 2.6.32, and I want to downgrade to 2.6.12
View 5 Replies View RelatedI have a problem with my system. Fedora 12 64bit I was tinkering with enabling rawhide and upgrade firefox(3.6 / namoroka) and pidgin. Then I disabled repo. downgrade pidgin again with its dependencies (glib2 or was it glibc2). Long story short, the next time i boot up, there are a lot of error / FAILED. Boot into run level 3 is fine. But i cannot use yum and it give error regarding libglib.so or something and phython need it. Locate found those item, so it might be because the version is wrong because of those upgrade / downgrade process. Sorry if the problem isn't clear, but can anyone give direction what should i provide.
View 3 Replies View RelatedI've recently installed a Radeon HD 5770 graphics card, but it currently doesn't have support from any open source drivers (including MESA's experimental DRI drivers). The only other option would be ATI's Catalyst drivers, but 9.12 doesn't support Xorg 7.5 at the moment (the drivers disable Xorg; leaving a terminal only setup).
The question I've got is that is it possible to downgrade Xorg to 7.4 as a temp workaround and if so, how easy would it be to revert back to 7.5 afterwards.
I recently installed Fedora 14 in an unused partition after having used Fedora 12 for some time. I used Add/Remove Software to download and install emacs successfully. However, there appears to be a bug in this version of emacs -- the menu bar grabs focus and will not give it back without cllicking on a menu item. I find this bug very annoying and would like to scrap 23.2 in favor of another version. According to emacs bug reports, this bug has been fixed in emacs 23.3 which is available right now from the emacs home page, but only as a tarball.
How long does it usually take for a new version, such as emacs 23.3, to become available as a Fedora rpm? Would it be possible for me to downgrade by installing the emacs 23.1 rpm? If so, how do I get it? (Fedora's Add/Remove Software lists only the 23.2 version for me.)
I recently upgraded my laptop from Fedora 14 to 15 and would like to go back to 14. What is the simplest way to do this?
View 2 Replies View RelatedI need to downgrade mysql to version 5.0, currently using mysql-5.5.13-1.fc15.i686
I saw that 5.0 was available in Fedora 10, so I tried to add fedora 10 repo from the archives.
Created f10.repo file in /etc/yum.repos.d/ with contents:
[f10]
name=f10
baseurl=http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/10/Fedora/i386/os
[Code]....
How to downgrade X server ver. 1.4.x to 1.1.x. I am facing problems with lot of dependencies.
View 2 Replies View RelatedI recently installed Fedora 10, having chosen that version in order to be able to use the packages created by the Planet CCRMA group for doing audio recording (they don't have F11 packages ready yet, AFAIK). Last weekend I got a prompt to upgrade my system, and I naively accepted it, not even realizing that it was an upgrade to F11.
The upgrade didn't work, for reasons that I still don't know (probably a video driver issue), but since I know the F10 installation worked, and Planet CCRMA is not up to F11 yet, I'd just like to downgrade myself back to F10.
Can I just re-install Fedora 10 from the DVD I used before, or will the F11 installation cause problems? I haven't really done any work that I mind losing, so I'm not too concerned about overwriting my previous installation.
I am using Fedora 14 and I need to install the libudev-devel package, but the following error occurs:
Error: Package: libudev-devel-161-8.fc14.i686 (updates)
Requires: udev = 161-8.fc14
This is because the actual version I have installed is:
udev-161-9.fc14.i686 (@updates-testing)
How can I downgrade to the udev-161-8.fc14.i686 package?
More details:
[root@localhost xxx]# yum install libudev-devel
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_GB to language list
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package libudev-devel.i686 0:161-8.fc14 set to be installed
--> Processing Dependency: udev = 161-8.fc14 for package: libudev-devel-161-8.fc14.i686
--> Processing Dependency: libudev = 161-8.fc14 for package: libudev-devel-161-8.fc14.i686
--> Finished Dependency Resolution
Error: Package: libudev-devel-161-8.fc14.i686 (updates)
Requires: udev = 161-8.fc14
Installed: udev-161-9.fc14.i686 (@updates-testing)
udev = 161-9.fc14
Available: udev-161-4.fc14.i686 (fedora)
udev = 161-4.fc14
Available: udev-161-8.fc14.i686 (updates)
udev = 161-8.fc14
Error: Package: libudev-devel-161-8.fc14.i686 (updates)
Requires: libudev = 161-8.fc14
Installed: libudev-161-9.fc14.i686 (@updates-testing)
libudev = 161-9.fc14
Available: libudev-161-4.fc14.i686 (fedora)
libudev = 161-4.fc14
Available: libudev-161-8.fc14.i686 (updates)
libudev = 161-8.fc14
Trying to use --skip-broken doesn't work.
I'm running Fedora 15 x86_64 on a Dell Latitude E6500. VMware Workstation won't run if I have glibmm24-2.28.1-1.fc15.x86_64 installed. I managed to downgrade to glibmm24-2.24.2-1.fc14.1.x86_64, and VMWare Workstation worked. Then, I did a "yum upgrade". Now vmware won't run. I tried to downgrade glibmm back to the 24-2.24 version, but I get the message:
Code:
% yum downgrade glibmm24-2.24.2-1.fc14.1.x86_64.rpm
Loaded plugins: auto-update-debuginfo, presto, refresh-packagekit
Setting up Downgrade Process
Examining glibmm24-2.24.2-1.fc14.1.x86_64.rpm: glibmm24-2.24.2-1.fc14.1.x86_64
Resolving Dependencies
--> Running transaction check
---> Package glibmm24.x86_64 0:2.24.2-1.fc14.1 will be a downgrade
---> Package glibmm24.x86_64 0:2.28.1-1.fc15 will be erased
--> Finished Dependency Resolution
Error: Protected multilib versions: glibmm24-2.24.2-1.fc14.1.x86_64 != glibmm24-2.28.1-1.fc15.i686
You could try using --skip-broken to work around the problem
** Found 1 pre-existing rpmdb problem(s), 'yum check' output follows:
autopano-sift-C-3.5.1-1.fc12.x86_64 has missing requires of libpano13.so.1()(64bit)
So I added the --skip-broken flag .....
I am trying to install ns-allinone-2.26 & nrlsensorsim. But it gets failed. When i explorer the problem, i found that only gcc problem in fedora 10. So i tried installing gcc-3.0.1.tar.gz but it gets failed during "make". So please guide me to overcome this problem. give me steps either to downgrade or to install alternate gcc version (gcc-3.0.1 or gcc-everything-2.95.tar.gz)
View 2 Replies View Relatedhow can i downgrade php from php5 to php4 on FC11 ?
View 3 Replies View RelatedI want to downgrade my Intel driver to version 2.11.0. I don't know what version I have at the moment but I have installed Fedora 15 (Lovelock). The reason is that Office 2007 has graphical bugs with Intel drivers that are newer than 2.11. So, will my gnome shell work fine after the downgrade and how to downgrade? I have searched a lot from google but didn't find any solutions.
View 3 Replies View RelatedI installed F13 on a system by doing and install from an F12 Live USB key and then doing an update do F13. Unfortunately the upgrade failed to update a package because it thought the F12 package was more recent. I can't just do a clean install of F13 because I'm in Massachusetts and the system is in Chicago so I need to be able to fix this remotely.
I tried to install Google Chrome. I'm getting the following error, package nss-softokn-freebl-3.12.4-19.fc12.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed As you can see the F12 package is -19 and the F13 package is -17 which is confusing yum. Is there a way to force yum to install the F13 package?
I'm using openSUSE 11.3 and yesterday I upgraded to KDE 4.5 from the KDE 4.5 stable repo. But after upgrading I faced some freeze/lock-up glitches which weren't there before. For example whenever I change the color scheme or style and press apply, the screen freezes although the mouse still moves around. I have to forcefully shut down to recover. So, I am thinking of downgrading to KDE 4.4. How do I go about doing that?
Here are the repos I'm currently using:
Code:
# | Alias | Name | Enabled | Refresh
---+---------------------------------------+-----------------------------------------+---------+--------
1 | KDE:45 | KDE:45
[Code]....
I recently installed updates for my laptop (its very old) and upgraded it form Ubuntu 8.04 to 9.10. This has caused a major decrease in permormance and I was wondering if there is any way of removing these upgrades.
View 6 Replies View RelatedI am having problems with 9.10 (first and foremost it won't boot properly, opens in low graphics mode only) and wishing I'd stuck with 9.04! Only find threads that didn't get answered or closed threads (including one about 'partial upgrades', which I did after booting in low graphics mode the first time. I am new to, or at least pretty green about Ubuntu and pretty much always install any updates offered - don't shoot me) Anyhow, I am hoping to avoid a full re-installation, but is there any way of going back, downgrading to 9.04?
View 9 Replies View RelatedI have used the 64 bit version of Ubuntu 10.04 for a while and am satisfied with it. The problem is when I watch video (Bloomberg) and listen to radio at the same time, it uses up a lot of memory (My PC has 3 GB of Ram). It degrades the performance of the PC. I also read that the only reason to use a 64 bit version is when a PC has 4 GB of Ram. Therefore, I wonder if it is possible to downgrade my current 64 bit version of Ubuntu 10.04 to a 32 bit version.
View 9 Replies View RelatedI want to downgrade rpm-4.7.2 to rpm-4.0.4
how should i do?
Last night I upgraded to Natty 11.04 and did not like it. I downgraded to 10.10.
I'm having a problem booting to a stable kernel. 11.04 uses 2.6.38. When I downgraded to 10.10, 2.6.38 was still at the top of Grub's list. When I boot there is a big black screen with a login and password. I was able to get to Ubuntu by holding down the shift key when rebooting and booted to 2.6.35-25-generic. I would rather not have to do this every time I turn on my computer. I went to Synaptic to delete 2.6.38, and did not see the version listed. I've read a lot (but I'm not a programmer). There isn't anything obvious (from this pea brain's perspective) to fix my problem.
I'm a CentOS 5.3 user at work. We need to run an application which needs CentOS 5.2 and it's technical support doesn't have a solution but change the version of the OS. Does anyone know how make a downgrade from version 5.3 to 5.2? Is that even possible?
View 6 Replies View RelatedI'm not sure if I am posting this in the right place, if not im sorry. I want to downgrade the kernel to 2.6.32 or a little older. I see the if I add the 11.2 repo I can install 2.6.31. Will that work though? Id rather not tank my system. I need to the older kernel for better support in a app I regularly use.
View 8 Replies View Related11.3 has broken my Samsung mfp color laser. According to an Ubuntu forum, the problem is that the Samsung driver is incompatible with glibc 2.11. Since just about everything seems to be dependent on glibc, the only way I can envision fixing my problem is going back to 11.2 and waiting until someone comes up with a fix to the Samsung driver problem. Other than doing a clean install of 11.2, is there a simple way to downgrade back to 11.2, or at least the parts of it dependent on glibc?
Since I was able to use the update option to move from 11.2 to 11.3, can I insert the 11.2 DVD and choose update? Or, perhaps, is there a particular set of 11.2 repositories that I can add to my 11.3 repositories, choose the 2.10 version of glibc and have the dependencies work out properly? I tried adding the download.opensuse.org/distribution/11.2/repo/oss/ repository, but Yast seemed to want to change my whole KDE installation from x86_64 to i586. Is there a group of other repositories that would make the repository route work?
Is there any way to downgrade 10.10 to 10.04 without reinstalling linux?
View 2 Replies View RelatedIt looks like the latest kernel update has borked the sound on my Macbook Pro 5 4. Is it possible to downgrade to the previous version (which i believe is -19) where my sound worked? If so, how do I go about this?
View 2 Replies View Related