when we do set -o ignoreof it will disable the working of ctrl+D confirm which file will effected with this command . also i want to assign that whenever i will press space bar my gnome-terminal will open how can it is possible . whre keyboard shotcuts working are placed any designation file ?
View 1 Replies
I have a proprietary device - something like an iPad screen - which has a front panel display with touchscreen buttons that work internally as a USB keyboard. During testing/debugging I want to connect it to another keyboard via the external USB port.Any application which I open on the device by pressing some characters on the touchscreen accepts input codes from either USB keyboard. I want to limit the touchscreen USB keyboard input only to a specific set of apps.Is there a program which can help me detect which USB port or device the code is coming from? Or someway I can map one keyboard to send a different set of codes? The device is using Linux.
View 2 Replies View RelatedIf there is a file in the Ubuntu Repository that will drive a Music Keyboard connected to a desktop computer through a joystick connector? If so, what is the name of the best file in the Ubuntu repository? Then, if there is a driver file for the keyboard, are there any additional files that would be good to download to play piano music on that keyboard?
View 7 Replies View RelatedWhenever I boot my Fedora 13, I see that the keyboard layout is switched to USA. I switch it back to TR, and it goes until the next reboot.. Then I have USA again..
I tried removing the USA layout altogether, it just comes back at next reboot.
I physically have a Dvorak keyboard (i.e. not using the layout switch). I also occasionally type in Russian, using the software layout switch available in Ubuntu (I'm using Hardy Heron).
I am unable to switch layouts (correctly) unless I am using a QWERTY keyboard. Is there an easy way to tell Ubuntu that I am using a standard Dvorak keyboard and to adjust the layout maps appropriately? If this is unavailable, how can I make my own Russian keyboard layout to correct for this?
As the title says, I'm interested in two (or more) simultaneous keyboards, each with a unique layout. Everything I've researched indicates this should be possible, but I'm unable to get it to work. Regardless of how I set things up, all keyboards consistently operate as if they share the CoreDevice setting in xorg.conf.
In the above config, both keyboards behave as if they're set for the USA layout. Changing the layout in gnome-keyboard-properties affects all of the connected keyboards equally, but has no provision for altering individual devices.
how is the file permission is defined?
for example when i use the command list -l testp01.txt i get the result of testp01.txt file permission -rw- r-- r-- root root etc however i wonder where are those information written?
is there any special file which contains all of these information?
i installed an old hdd that i had laying around to my new desktop PC SO THAT I COULD USE IT SPECIFICALLY FOR UBUNTU. I FORMATTED IT THEN WENT TO RUN THE UBUNTU SET UP DISK.BUT I GOT THE MESSAGE "NO ROOT SYSTEM DEFINED" WHAT DO I NEED D
View 3 Replies View Relatedi m getting following error which executing a file : Code:version glibc_2.0 not defined in file libc.so.6 with link time referenceThe file is a binary file so cant be edited, its being called through a php file in which changes are possibl
View 14 Replies View RelatedI would like to be able to have two sessions, each with their own monitor and each having their own, assigned input devices, all off of one computer. In other words, two people would be able to use two different keyboards/mice and two different monitors simultaneously using two different sessions. Is this possible, or should I look into a terminal server machine?
View 3 Replies View RelatedI am having a lot of trouble with my computer... tried to upgrade to Ubuntu 11.04 on my computer, but the update crashed and then the keyboards lights just kept blinking. So I thought okay, I will try A fresh install. So I plugged up my old dinosaur and made a new boot cd. When I try to boot it, it shows that it is loading. But then the screen will go crazy, it will be a bunch of mashed boxes with funy colors sort off.can not get any responce out of it. So I try the boot cd in my old computer and everything works great.My computer specsare(custom):Motherboard = msi 785gm-e51 / 760gm-e51Cpu = AMD Phenom 2 duel core, running around 3.7 GHzRam = 2 gigs of ddr3Video card = GT240 galaxy...Geforce 200 series...An old wimpy 80 gig hardrive..Any ideas, I really like Ubuntu and usally have no problem that I can not Google myself out of but this time I can not find what I need.
View 1 Replies View RelatedError message: GLIBC_2.0 not defined in file libc.so.6 with link time reference. What can I do?
View 1 Replies View Relatedim trying to prepare my partitions for fresh installation. The partition manager didnt list anything with an error message that said:Quote:No root file system is defined. Please correct this from the partitioning menu?This is what Gparted displays Quote:
/dev/sda1 ext3 /tmp/boot
/dev/sda2 unknown
/dev/sda3 ext3 /tmp/opsys
I use jessie-32bit of kernel 4.1.3 on ASUS EeeBook X205TA.
And I use Japanese Model. There are key 【,|】and【,_】in this model keyboard.
But my system does not recognize the two keys.
In /etc/default/keyboard, edit below
XKBMODEL="jp105"
XKBLAYOUT="jp"
I can Japanese layout, but the two keys is nonreactive.
And I cannot dpkg-reconfiguration keyboard-configuration.
Code: Select all#dpkg-reconfiguration keyboard-configuration
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
I'm seeking to make permanent a selection in openSUSE-11.4 LXDE between english and Thai keyboards. And I need help here, as I have only succeed partially. After installing Thai via YaST regional settings, I followed the advice in an LXDE forum here LXDE.org Forum - View topic - How to add layouts to keyboard preferences in LXDE? and on the LXDE Panel I righted click on LXPanel->Add/Remove Panel Items->Panel Applets->Add->Keyboard Layout Switcher. Upon a restart of X that gave me a US flag symbol (for US keyboard) in lower right hand corner. No other language selection. I then as a regular user sent the command
Code:
setxkbmap -option grp:switch,grp:alt_shift_toggle,grp_led:scroll us,th
and I then had a choice between Thai and US keyboard which worked well. That unfortunately is only temporary until the next reboot. HOW to make it permanent ? I tried, and I was unable to make that permanent. I tried adding .Xkbmap to /home/user (restarted/tested) and when that failed I tried adding .Xmodmap to /home/user (restarted/tested) and when that failed I tried adding /etc/X11/Xkbmap (restarted/tested) and when that failed I added same line to /etc/X11/Xmodmap (restarted/tested) and that also failed. The line in all cases was
Code:
-option grp:ctrl_shift_toggle,grp_led:scroll us, th
I also tired editing the /etc/X11/xorg.conf.d/90_keytable.conf file, changing it to
Code:
Section "InputClass"
Identifier "LocalKeyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "us, th"
[code]....
I could create a script with my 1st successful effort (and have that run when LXDE starts up) but surely there is a more elegant way? I am also NOT keen to have this system wide (even thou I tried that system wide (unsuccessfully) at the end) but I would rather only have this for one LXDE user.
I would like to snap windows in GNOME (more specifically, under Ubuntu) to user pre-defined grids.
I have tried the "Snapping Windows" and "Grid" plugins for Compiz, and have also seen demos of PyWO, but none of these tools seem to provide the above option.
I need to setup my ubuntu pc single nic card ip as 192.168.1.6 for internet and 10.172.170.95 and 135.10.86.100 for my lan and for another network through my 4port DSL modem.So i defined like this.Except addition of last two routes(10.0.0.0/8 & 200.200.176.0/24) everything worked as defined, what is the mistake i did?
In /etc/network/interfaces file
auto lo
iface lo inet loopback[code]............
I am trying to install Linux Mint 10 on a newly formatted 40gb hard drive. I have not been able to get the the install program to see my hard drive. The program seems to work well off of the CD. I have checked the md5 sum and it is a good copy of the program. It will be the only operating system on a Athlon64 3200, PC Chips M861g mb combo. I have also tried Ubuntu with similar results.
View 9 Replies View RelatedI am trying to; "bitbake base-image" and get the following:
Build Configuration:
BB_VERSION = "1.10.2"
METADATA_BRANCH = "master"
METADATA_REVISION = "8d22023"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "at91sam9g45ekes"
DISTRO = "angstrom"
DISTRO_VERSION = "2010.7-test-20110214"
TARGET_FPU = "soft"
Log data follows:
| NOTE: make -j 4 include/linux/version.h
CC=arm-angstrom-linux-gnueabi-gcc
-mno-thumb-interwork -mno-thumb
LD=arm-angstrom-linux-gnueabi-ld
| CHK include/linux/version.h
| NOTE: make -j 4 uImage
CC=arm-angstrom-linux-gnueabi-gcc
-mno-thumb-interwork
-mno-thumb LD=arm-angstrom-linux-gnueabi-ld
| CHK include/linux/version.h
| SYMLINK include/asm -> include/asm-arm
| make[1]: `include/asm-arm/mach-types.h' is up to date.
| CHK include/linux/utsrelease.h
| CALL scripts/checksyscalls.sh
| <stdin>:1097:2: warning: #warning syscall fadvise64 not implemented
| <stdin>:1265:2: warning: #warning syscall migrate_pages not implemented
| <stdin>:1321:2: warning: #warning syscall pselect6 not implemented
| <stdin>:1325:2: warning: #warning syscall ppoll not implemented
| <stdin>:1365:2: warning: #warning syscall epoll_pwait not implemented
| CHK include/linux/compile.h
| GEN .version
| CHK include/linux/compile.h
| UPD include/linux/compile.h
| CC init/version.o
| LD init/built-in.o
| LD .tmp_vmlinux1
| arm-angstrom-linux-gnueabi-ld: no machine record defined
| arm-angstrom-linux-gnueabi-ld: no machine record defined
| make: *** [.tmp_vmlinux1] Error 1
| FATAL: oe_runmake failed
| ERROR: Function do_compile failed
NOTE: package linux-2.6.30-r6: task do_compile: Failed
I want ssh a remote server through shell script with predefines username and passwd. i dont know how to use expect command to do that.
View 4 Replies View Relatedi am runing the below script
foo..
if [ "$type" == "ok" ]
then string=ZZZZ:I=$number
elif [ "$type" == "NOK" ]
[code]....
the code inside sc2.sh needs to read the input from the variable (string) above. is there any way to make this variable recognized inside the sc2.sh
I need help to write a script to commit files to SVN from a defined location to a SVN folder (ideally with new folder).
View 1 Replies View RelatedI have a Linux server running CentOS with 2GB RAM. I am searching in google and also in this forum but could not find any luck yet. I am searching the way that we can receive notification by system to a specified email when the memory reached a specified value we defined.
Is there any tool or sort of shell script we set via crontab every minute to check that?
From Ubuntu 11.04 installer. What does this mean? how do I do it correctly?
View 11 Replies View Relatedextract.ksh use this scripts topic_file_publish.sh but extract.ksh resides in /data/apps/pnbos/scripts
but topic_file_publish.sh in below directory/data/apps/pnbgstk/publication >
ls topic_file_publish.sh topic_file_publish.sh fraespappp8:/data/apps > type topic_file_publish.sh topic_file_publish.sh is hashed (/data/apps/pnbgstk/publication/topic_file_publish.sh)
How it is done?
since topic_file_publish.sh is being directly referenced in the code with absolute path.
How can I create shortcut from one ftp folder to another using SFTP client such as WinSCP with Putty?
For example, application path is /home/primary/webapps/appication/
We have created new user with default home directory /home/secondary/
Using Bash command:
setfacl -R -m u:secondary:rwx /home/primary/webapps/appication/
we added full Read-Write permission for secondary user.
To access application folder he suppose to type full path to application folder which is not so convenient for daily usage.
As a solution I would like to create some shortcuts in home directory to this folders as I seen something similar in default cPanel configuration where PUBLIC_HTML folder has some alias such as WWW.
How can I set catalogs names shorcuts for not typing.
Code: cd ~/Documents/work/Evg/biblatex but
Code: cd working_dir_shortcut_name
Can I change shortcuts of vi to something of my own. For example, dd is use to cut the line. Can I use simply 'd' to delete the line instead ?
View 3 Replies View RelatedI am new to linux, I would like to know the commonly used keyboard shortcuts. I want to get familiar from the basics.
View 8 Replies View RelatedI recently installed Fedora, after trying Ubuntu and Opensuse. And it really works great! I'm still getting used to it, I had accidentally deleted my wireless network driver when I was deleting some packages. I'm only missing those Win 7 shortcuts, like 'windowskey + up' to maximize the window and 'windowskey + left' to resize the window to half of the screen and place it on the left. Is there any way I can get those in Fedora?
View 5 Replies View Related
