I need to setup my ubuntu pc single nic card ip as 192.168.1.6 for internet and 10.172.170.95 and 135.10.86.100 for my lan and for another network through my 4port DSL modem.So i defined like this.Except addition of last two routes(10.0.0.0/8 & 200.200.176.0/24) everything worked as defined, what is the mistake i did?
In /etc/network/interfaces file
auto lo
iface lo inet loopback[code]............
How do I add a route that doesn't go away after a reboot? I tried adding to /etc/sysconfig/network-scripts/route-wlan0 and /etc/sysconfig/static-routes but neither of them did anything when I restarted network and NetworkManager. route command does not show the new route that I added. I tried this too - routes.html and there were no errors but the new route doesn't show up with the route command.I added "192.168.13.88/255.255.255.255 via 192.168.13.101 dev wlan0"
View 2 Replies View Relatedhow is the file permission is defined?
for example when i use the command list -l testp01.txt i get the result of testp01.txt file permission -rw- r-- r-- root root etc however i wonder where are those information written?
is there any special file which contains all of these information?
im trying to prepare my partitions for fresh installation. The partition manager didnt list anything with an error message that said:Quote:No root file system is defined. Please correct this from the partitioning menu?This is what Gparted displays Quote:
/dev/sda1 ext3 /tmp/boot
/dev/sda2 unknown
/dev/sda3 ext3 /tmp/opsys
I have a folder named "logs" which contains log files. I would like to have a bash script or a cron job or something like this which will check the folder continuousy and perform some tasks (for example echo "New file is created") every time a new file with pattern like "Screen.log.***" is created in the folder "logs"
Is it possible in Linux?
From Ubuntu 11.04 installer. What does this mean? how do I do it correctly?
View 11 Replies View RelatedI can use Ubuntu from my flash drive, but I want to install it in a partition alongside windows. When I try to do this, I come to an 'allocate drive space' window, but whatever I do I get the error message: 'No root file system is defined. Please correct this from the partitioning menu.' I just don't know what this means, or what to do next. I'm loathe to ditch windows, and I don't want to have to use a flashdrive all the time.
View 3 Replies View RelatedI just happen to have a glitch with my newly rebuild slackware server. This morning everything was working fine. Then having recently setup raid arrays, I decided to try MrGoblin's rc.mdadm script to monitor the raid arrays.
I copied the rc script to rc.d & added lines in rc.local to start the script, and a line in rc.6 to stop the script when shutdown or reboot.
Now, I cant reboot neither I can shutdown...
If I issue the command "shutdown -r now", Slack execute the normal shutdown or reboot steps, unmount the local FS, turn off swap, remount the rootdev as readonly, and then I see:
Code:
Mdadm monitor not running:INIT: no more processes left in this runlevel & it stalls at this point forever...
Before the machine would have rebooted after this line. What could explain this? Now I have to hard power down or reset the machine, and of course, upon rebooting I get a REISERFS warning of unclean shutdown...
Content of the rc.local:
Code:
#!/bin/sh
#
# /etc/rc.d/rc.local: Local system initialization script.
#
# Put any local startup commands in here. Also, if you have
code....
I put a formatted drive in my desktop so I could run Ubuntu on it. When I went to install, it read "No root file system is defined". What gives?
View 2 Replies View Relatederror message when I ran my program that I couldn't open my local file. I have two files first one is called client, second one is called server I am using named pipes to sent a message from client to the other file called server in client I used mknod() to create the two named pipes,one for read,one for write and created new thread in client using fork() spawned a child process that executed the server file both named pipes are opened the client file got the message from the user and sent it through the named pipes to the server file when the server receives the message , it needs to verfify it is correct in the server file, a local file descriptor is created to read and send this verifing message when it is not correct but I am getting an OPEN() error when I tried to open this shared local array buff and attach it to a file descriptor where the message is kept why do I get this error in server file
int main()
{
/*both named pipes are open*/
rfd=open(IFIO1,0);
wfd=open(IFIO2,1);
[code]....
I've recently installed Ubuntu 10.04 64bit Desktop onto my 640GB hard drive. I used Wubi to download and install it onto a 100GB drive partitioned out from my 640GB hard. After I reboot and log into Ubuntu, it says that Roof File is Not Defined. The only thing I can do is to force my computer to shut down as so i did. After that I went to the demo mode of Ubuntu 10.04 as I can't do anything on the Normal Mode.
View 1 Replies View RelatedOur system has a large number of init scripts (over 180). When we reboot it, we need it to be reachable over the network before all the init scripts load, so putting the routes in rc.local does not work. What's the best place to put the routes so that they get added as soon as possibe?
View 4 Replies View RelatedOS: OpenSUSE 11.2
Application: Recital Developer (database)
I'm running into this error when I startup the program."GLIBC_2.0 not defined in file libc.so.6 with link time reference"
I'm trying to install Ubuntu build 9.10 on my Macbook Pro. All's fine and and dandy when it comes to partitioning the hard drive on Boot Camp.
However, when installing Ubuntu I get to the Partitioning stage (Step 5 I believe) and when I select the space that I have allocated for Ubuntu (80g) and go to hit forward, the wizard hits me with File System not Defined.
Question is to you guys, do I then have to select that space and edit it with the Change function (if so what do I change), or, do I have to change the way the space is formatted on the OSX side of things.
The partitioned space is hfs if that has anything to do with it?
Running OSX 10.5.8 all up to date.
I have been using Ubuntu 9.10 Desktop version for around 1 month then i stoped using after installing windows 7, as I knew that there were the 10.04 version coming. So when it was released i went to torrent download the file and burned it on a cd. After that i insert the cd and use the wubi installer in there as i want to install them side by side. so after installing ubuntu i restarted the system and got into it. After a few minutes it appeared this error message "Not root file system is defined. Please correct this from the partitioning menu." So i was expecting it to be downloading problems. I went on to ubuntu website requested for a CD and it came today. So i inserted the cd did the same thing again.
View 9 Replies View RelatedClassic partition problem apparently. What do I do? the 11.04 wubi doesn't give a lot of installation options, so i just selected C drive, and gave it 10GB of space. instilled it, and when it goes to the desktop menu, that pop up appears saying No root file system is defined. Please correct this from the partitioning menu
In dual booting with XP. what do I do?
I'm trying to install 11.04 and get the error warning in the title. It says "Please correct this from the partitioning menu."How do I do that?I don't see any options for that.Puppy will already boot from that device and has grub installed.
View 9 Replies View RelatedI have created a file with a pre-defined size as follows:
Code:
#define FILEPATH "testfile"
#define FILESIZE 16
[code]...
So I have an external hard drive (wd passport) that I want to install ubuntu on. I created 100gb partition via diskutility (fat32) and it seems I can't install ubuntu on this partition.
View 3 Replies View RelatedWhen I tried to install 10.10 'side by side' with 10.04 and OpenArtist for triple booting I get the messageQuote:No root file system is defined. Please correct this from the partitioning menu.I don't have the screen in front of me now but what5 does it want me to do and how do I do it?
View 9 Replies View RelatedI'm having a problem and it seems like partitions during the dual boot install.
Here's EXACTLY what I get...
Menu: Allocate drive space
Erase and use entire disk
X Specify partitions manually (advanced) [X denotes I chose this option]
I have 3 partitions on my gateway laptop...
[graphical bar across the top]
sda1 NTFS - 10g - weird partition w/recovery software or something from Vista
sda2 NTFS - 140g - Windows Vista
47g FREE SPACE [this is where I want ubuntu]
[Code].....
I click "Install Now" and I get this error:
"No root file system is defined. Please correct this from the partitioning menu."
i got a sample.c which generate a linked list for sorting according to the number generated. then i want to split the sorting function into a header file. and it looks like the sort function in the header file could not access the linked list in the main. the error is dereferencing pointer to incomplete type
sample.c
Code:
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
[code]...
This has been bugging me since I upgraded to 11.4. First I noticed that most of the time when a file is copied from an application (say, downloaded from Firefox) in to a directory that Konqueror does not show the new file until I hit "Reload".OK, I could live with that, annoying as it is. Why it can't recognize that a new file has been added to the directory since the last display refresh when I switch to that window I don't know, but fine, whatever.
Then I installed Firefox 4.0 - and now frequently when I open the "Save As" file browse dialog, it doesn't see any of the files recently added either. I put in a complaint to Mozilla, but apparently only ONE other person on the planet has ever seen this happen. But it was never the case before, either in earlier Firefox or earlier openSUSE releases. I was always able to see the files I previously saved to that folder when saving a new one.
And today it happened in Kaffeine which I don't remember ever seeing before. I opened the "Open File" dialog and it couldn't see a video file I had just downloaded. When I closed Kaffeine and then restarted it, it could see it.Is this something that has been ongoing or is it new? I can't find anything via Google Search to explain it. Is there some setting somewhere that needs to be tweaked? Is it a file system problem?
wondering if it's possible to add a link to a file in the Places Menu? for example a link to a Writer file I use a lot. I see how to add folders, but is it possible to add files?
View 9 Replies View Relatedim nirmal r ..i have installed ns2 in redhat 5.i have added an cc file to an tcl script and while compiling the make in terminal it shows me like this..(i have tried to enable the propertise but i con't)
[Code]....
I am running a RAID0 array, with Windows 7 Ultimate x64 installed.
When i install LL10.04 through Wubi, it installs fine, reboots, continues the installation procedure, then it gives me an error box "No root file system is defined".
I have attempted pressing the "OK" button 10 or 15 times, however it does not progress. The box just keeps on popping up. My only option is a hard reset.
I've tried downloading the latest version of Wubi from the official website, and allowing Wubi to download ubuntu itself, and still nothing.
I do not want to create a new partition for Ubuntu and use the GRUB loader. I have a multi boot system and would like to stick to the windows boot loader.
So I keep getting this error from the 10.10 installer:
"No root file system is defined. Please correct this from the partitioning menu."
However the partitioning menu shows no disks or partitions at all.
The disk browser can however see and mount both partitions from my disk.
It is a terabyte SATA drive and the bios has been set to IDE.
It has 2 partitions with windows installed on the first partition.
Gparted can see both partitions but claims it cannot find the mount point of the second partition. (both are NTFS)
I have attached a screenshot.
How to proceed from here so I can install Ubuntu.
I'm trying to install ubuntu on d partition i deleted, which now is "free space" but its giving me that error
So im guessing i have to click on add, what do what i click on? primary? beginning? end? ext 4 im guesing and which mount point?
Im installing it on d portition which i deleted and is now free space, i have windows 7 on c.
When I get to installation step "Allocate drive space" I get this message, "No root file system is defined. correct this from the partitioning menu." What is the source of this error and what do I need to do to correct it? I don't see a partition menu other than a choice of using the whole drive or a partition? Below are the choices that I have made. Specify partitions manually (advanced) Allocate drive space Choice are device (/dev/sda4) Type ((ext3) size) Mount Point (no choices offered) Size (42088 mb) used (670 mb) boot looder is sda Windows 7 ext3 42088 MB I am installing Ubuntu 10.1 on a seperate partition. Windows 7 is on another partition. The machine is an ASUS A52F Laptop
View 2 Replies View RelatedDefining tcsh aliases through a .aliases file has worked perfectly for me for years and years using cygwin and older versions of mandriva. I am encountering very annoying and mysterious problems when attempting to do the same thing with a .aliases file in a fedora 64-bit VM. Strangely, if I define aliases in the file, they won't work, but if I do so on the command line, then they will.
Here's a simple example: Suppose I define an alias for "ls" in the file:
alias ls '/bin/ls'
Then source the file. This happens:
me: ls : Command not found.
me: alias ls
/bin/ls
me: /bin/ls
file1 file2 file3 etc.
me: unalias ls
me: ls
file1 file2 file3 etc.
me: alias ls '/bin/ls'
me: ls
file1 file2 file3 etc.
A second example: if I place either of these lines in my .aliases file:
alias d '/bin/ls -alF !:1'
alias d '/bin/ls -alF !*'and source the alias file, this happens:/ me: d
Bad ! arg selector. However, if I define the alias on the command line:
/ me: alias d '/bin/ls -alF !*'then the alias behaves correctly:/ me: dtotal 376
drwxr-xr-x. 10 r r 4096 Apr 14 16:05 ./
drwxrwxr-x. 6 r r 4096 Feb 21 16:15 ../
drwxr-xr-x. 3 r r 4096 Apr 14 16:05 bin.v2/
-rwxr-xr-x. 1 r r 193872 Apr 14 15:35 bjam*
-rw-r--r--. 1 r r 52804 Apr 14 17:20 bjam.my.log
drwxr-xr-x. 77 r r 4096 Nov 17 09:49 boost/
-rw-r--r--. 1 r r 989 Nov 17 04:51 boost.css
