Debian Configuration :: Cannot Change Keyboards Model On ASUS EeeBook X205TA
Jul 22, 2015
I use jessie-32bit of kernel 4.1.3 on ASUS EeeBook X205TA.
And I use Japanese Model. There are key 【,|】and【,_】in this model keyboard.
But my system does not recognize the two keys.
In /etc/default/keyboard, edit below
XKBMODEL="jp105"
XKBLAYOUT="jp"
I can Japanese layout, but the two keys is nonreactive.
And I cannot dpkg-reconfiguration keyboard-configuration.
Code: Select all#dpkg-reconfiguration keyboard-configuration
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
View 0 Replies
ADVERTISEMENT
Jul 26, 2015
I use jessie-32bit of kernel 4.1.3 on ASUS EeeBook X205TA.
And I use Japanese Model. There are key 【,|】and【,_】in this model keyboard. [URL] .... But my system does not recognize the two keys.
In /etc/default/keyboard, edit below
XKBMODEL="jp105"
XKBLAYOUT="jp"
I can japanese layout, but the two keys is nonreactive.
And i can not dpkg-reconfiguration keyboard-configuration. It's no response. No appear.
Code: Select all#dpkg-reconfiguration keyboard-configuration
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
View 0 Replies
View Related
Jul 22, 2015
I use jessie-32bit of kernel 4.1.3 on ASUS EeeBook X205TA. But it doesn't recognize buttery status.Result of my investigation, the incomprehensible ponts is below.
・"acpi -b" outputs no information.
・There is not "battery" directory in /proc/acpi/. (button only exists.)
The following is my system informations.
Code: Select allacpi -V
Adapter 0: on-line
Cooling 0: intel_powerclamp no state information available
Cooling 1: Processor 0 of 10
[code]...
I want to check battery in console and fluxbox Desktop.
View 2 Replies
View Related
Oct 2, 2015
how to install alsa drivers along with Asus xonar dgx sound card. I followed these instructions. URL....And until "Setting up modprobe and kmod support" instructions were clear. I should put something in /etc/modules, but I dont down exactly what.
Code: Select allroot@SERVER:~# aplay -lL;
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
Code: Select allroot@SERVER:~# lspci -nn | grep -i audio;
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
02:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
[code]....
View 3 Replies
View Related
Apr 5, 2010
I am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
View 1 Replies
View Related
Dec 25, 2010
Need a driver for a Compaq P900 Trinitron monitor, Model PE1030 using Linux Mint 8 Helena. Unable to change resolution. Max is 600 x 400.
View 6 Replies
View Related
Oct 14, 2010
So my 8 year old HP has finally bit the dust. Any opinions on a new HP model?
View 14 Replies
View Related
Jul 17, 2011
I don't care for domain 'authentication' by an "Authority". I don't trust no one, so CA's to me are as trustworthy as the gypsy in the park.
I can use a self-signed certificate, but the problem is most browsers makers are Fn idiots that say the connection is not secure, when it actually is, but because I did not folk out cash, it makes my website look bad. I can understand the need for a 3rd party to verify the domain host to prevent man in the middle attacks, but I do not care for this.. and browser makers should take more responsibility and introduce different padlocks for types of authentication, rather than saying "this connection is encrypted, but not secure because its self-signed". What a load of horse s***!
How many times does people stop to read certificate authoraties? I sure don't. I only care weather or not the connection has been encrypted.. so, I am looking for a way for simply providing encryption for my website.
From what I understand, when you submit a CSR to a CA, it includes the private key, meaning that the CA would be able to see the encrypt data, should they get hold of it. This is not acceptable for me.
Is there anything other way to use encryption other than the SSL model that is used typically amongst HTTPS browsers today?
View 2 Replies
View Related
Jul 12, 2015
I have setup a VPS @ Strato with Linux Wheezy.Since I'am in the Netherlands I got a Dutch language package installed.I like to setup into englisch all the way.Via dpkg-reconfigure locales I have installed en_GB.UTF-8 UTF8 language packages and deïnstaled nl_NL.utf8
Generating locales (this might take a while)...
en_GB.UTF-8... done
Generation complete.
But a lot of the commands are still in Dutch like: h2458377:~# uitgelogd.And quite often I got:
-su: warning: setlocale: LC_ALL: cannot change locale (nl_NL.utf8)
How do I get ripped off this error?Just working with/on the command line
View 1 Replies
View Related
Sep 20, 2015
I have debian latest stable and have been using a geforce gfx card which has now failed.I have removed the gfx card and activated the on board gfx in bios and I can boot to the grub screen.The onboard gfx is on my i5 4600.After I select debian from grub I end up with a blank black screen and a small cursor in top left hand corner but I cannot type anything with this cursor. From this screen I can only ctrl+alt+del for reboot or physically turn off the pc.I think this is a driver issue but wouldnt debian just use a default gfx driver automatically in this situation so I would at least get to a console or desktop? If this is the case what is the process to enable the required driver? via rescue disk?Mobo is gigabyte GA z87 hd3 and im wondering if this might be something to do with uefi or similar?
View 5 Replies
View Related
Jun 9, 2011
I am having a problem setting up an interface. the state does not seem to change to up and i don't even see any errors
#/etc/network/interfaces
# The Office LAN
auto bond0
iface bond0 inet static
[Code]....
View 1 Replies
View Related
Jun 26, 2015
In Jessie I would change the "critically low battery value". So from dconf-editor I followed this path:
Code: Select all/org/gnome/settings-daemon/plugins/power/
as suggested here [URL] ....
and here [URL] ....
The problem is that I haven't none of the following fields:
time-action
time-critical
time-low
or
use-time-for-policy
percentage-action
percentage-critical
percentage-low
How can I overcome this problem? Why the dconf-editor seems to be incomplete?
View 2 Replies
View Related
Mar 30, 2016
I've an asuspro (more precisely the p2520la version) notebook with the fn+f5, fn+f6 buttons that should change brightness of the screen. But they don't work. For volume it's ok (fn+f11/f12), and if I go in the system settings I c an change manually the brightness (I use kde so there is a bar with which change it). But when I'm outside and the screen brightness is low I found difficult to find the menu settings and the hardware buttons would be better.I've tried adding to the kernel the "acpi_osi=" command but doesn't work.
View 0 Replies
View Related
Dec 3, 2010
I looked into my shell 'profile' on my running lenny and copied the PS1 definition over to my [virtual] new squeeze machine, but astoundingly, the prompt does not change!
The prompt always remains to be like this:${debian_chroot:+($debian_chroot)}u@h:w$
This does definitively not stem from 'profile' and I cannot find, where it is defined and how I can override this. If I do it interactively, in a terminal [terminal running in Gnome], it works like expected. In that script, even if I use 'unset PS1',followed by PS1= ... / export PS1, it does not change,Someone with the knowledge and/or a good idea would be great!
View 8 Replies
View Related
Feb 12, 2011
I try to build my own live usb-hdd and get this problem:
#lh_build
Failed to fetch http://ftp.us.debian.org/debian/pool/main/a/app-install-data/app-install-data_2008.11.27_all.deb Size mismatch
[code]....
View 1 Replies
View Related
May 6, 2011
The resolution is OK in grub menu but after something is setting to higher value. How can i set it back to 640x480?
View 1 Replies
View Related
Jun 15, 2011
I'm trying to change the background for GDM3, but nothing happens. I have edit /etc/gdm3/greeter.gconf-defaults and /usr/share/gdm/greeter-config/20_debian and then dpkg-reconfigure gdm3 and invoke-rc.d gdm3 reload, but it still has a horrible, green background colour.
View 11 Replies
View Related
Sep 7, 2011
I am running a Debian server, but I have a problem with the locales, as I need to use the Danish letters I tried using dpkg-reconfigure locales, but it do not change the LC_* and LANG*, but it is set to POSIX How can I change the locales to da_DK_UTF-8?
View 14 Replies
View Related
Jan 14, 2009
where can I change the single click into a double click (because I'm a windows user (sorry!))? The mouse model does not support this.
View 4 Replies
View Related
Oct 6, 2015
I have three monitors, two Dells and an older LG all native at 1920x1080@60Hz and only recently installed Debian on this setup.
The LG is detected as running at 59.93Hz instead of 60Hz and this discrepancy appears to drive up the temperatures in my GPU constantly, even on idle, and introduces severe stuttering in any kind of graphical application.
I had the exact same issue with Windows 7 as well, but was able to fix it by changing the display settings of said monitor to 60Hz refresh, thereby returning the idle temps to normal and removing the stuttering.
My problem now is that I can't seem to change the refresh rate of this screen at all under debian.
xrandr -q returns that the monitor is running at 59.93Hz, but also shows 60Hz as available.
xrandr --output DVI-I-1 --rate 60
appears to have absolutely no effect, it doesn't error but it also doesn't change the refresh rate.
Trying to add a new mode with 60hz and modeline obtained from cvt results in the following:
Code: Select allxrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
xrandr --addmode DVI-I-1 "1920x1080_60.00"X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 41
Current serial number in output stream: 42
I've also tried to set the refresh rate through the proprietary nvidia driver and manually through xorg.conf, both to no effect;
Here's my current xorg.conf:
Code: Select allSection "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
[Code] ....
The driver settings will show 60Hz but the listing for the monitor in the driver and xrandr will still show 59.93Hz. Saving the settings of nvidia-settings to .nvidia-settings-rc was equally fruitless.
The settings on the monitor itself also show it running at 60Hz, without an option to go down to 59.93Hz so I got no clue where that is even coming from.
What else to try, besides buying a new monitor, which I'm not quite prepared to do yet.
View 3 Replies
View Related
Oct 24, 2015
When I installed Debuntu i picked US as my country, and now when i try to change region/language/keyboard-layout to norwegian, Debuntu only suggests english. How can i install the Norwegian language pack to debuntu?
View 2 Replies
View Related
Jan 3, 2016
I got some trouble with suspending/hibernation using gnome or mate. None of them can suspend the T450 correcly neither to disk nor to ram. If I run pm-utils from a terminal pm-sleep and pm-hibernate work fine both. So I guess all I need is to change the commands which are run by clicking on the suspend or hibernate button, but how to change what is behind the GUI.
View 0 Replies
View Related
Apr 18, 2016
I have SSD drives without SCT support, because of this I want to tune /sys/block/device-name/device/timeout in order to force mdadm put these drives offline. So, I can see my drive like this:
/dev/disk/by-id/ata-OCZ-SABER1000_A22MJ061512000074.
Where can I tune /sys/block/device-name/device/timeout from 30 to 7 sec only for these drive? I don't want to use rc.local.
Can I create right udev rules for it in /etc/udev/rules.d?
I want to avoid any conflict with /lib/udev/rules.d.
Code: Select all# udevadm monitor --environment --udev
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
UDEV [9302.549485] add /devices/pci0000:00/0000:00:01.2/0000:03:00.0/host0/target0:0:0 (scsi)
ACTION=add
DEVPATH=/devices/pci0000:00/0000:00:01.2/0000:03:00.0/host0/target0:0:0
DEVTYPE=scsi_target
SEQNUM=5210
SUBSYSTEM=scsi
[Code] ....
View 0 Replies
View Related
Apr 10, 2010
i have created a wordpress user with a symbolic link from his home (/home/wordpress) to /usr/share/wordpress but when wordpress ftps to wordpress home dir it does not follow the sym-link. is there a way to set default ftp dir for the wordpress user to /usr/share/wordpress rather than /home/wordpress?
View 6 Replies
View Related
Aug 6, 2010
How do I change amount of display Hertz in VC? I have a conjecture that it's not the same as in GUI (on my computer). Ubuntu 10.04, Gnome. if not Debian, but at least it's close.
View 2 Replies
View Related
Sep 13, 2010
how to change the default language of gnome.when i boot into x-window ,i can select the language ,But ,if boot into console ,via "startx" to run the w-window ,the language is english,i can't select .my native language is Chinese.i set the right locale .I also searched for it .Someone told to add "export LANG=zh_CN.UTF-8"to $HOME/.xinitrc.there's no this file in my home dicretion.I create it .after that,when i run "startx",it's failed to start x-window.the ~/.xsession-error file shows
Initializing gnome-mount extension
seahorse nautilus module initialized
Unrecognized number formatter: cjk-chinese-simp
Unrecognized number formatter: cjk-chinese-simp
[code]...
how can i change the default language ,i have to .because if gnome is in English ,i can't run the Chines input method.
View 1 Replies
View Related
Feb 9, 2011
Howto change user password in live usb-hdd?[URL]you need to copy the
/usr/share/initramfs-tools/scripts/live-bottom/10adduser your build folder:
mkdir -p config/chroot_local-includes/usr/share/initramfs-tools/scripts/live-bottom/
cp /usr/share/initramfs-tools/scripts/live-bottom/10adduser config/chroot_local-includes/usr/share/initramfs-tools/scripts/live-bottom/
[code]....
View 8 Replies
View Related
Mar 28, 2011
I'm trying to allow non-root account to use avrdude to program mucrocontrollers. There are many articles online about how to do that, but it seems not to work for me. Every time i try to execute avrdude it says "permission denied". Here's "$ udevadm info --name=/dev/bus/usb/002/011 --attribute-walk" says looking at device '/devices/pci0000:00/0000:00:1d.1/usb2/2-1':
KERNEL=="2-1"
SUBSYSTEM=="usb"
DRIVER=="usb"
ATTR{configuration}==""
[code]....
However, after restarting udev, replugging the device, even rebooting the computer I still get "permission denied". The Vendor and Product match, so what's the problem?
View 7 Replies
View Related
Apr 13, 2011
I updated to Wheezy from Squeeze and whilst I can make changes to sources.list manually, I can't do some updates in Software Sources.For instance, the 3 check boxes under "Download from internet" are all un-ticked and I can't change them if I wanted to - even though the sources.list is set up with "main contrib non-free"I cannot amend the download server either - it works out what the best server is but wont update if I tell it to.
View 9 Replies
View Related
Jun 7, 2011
On my Laptop, I installed Debian under the file "/" and the partition on which I have all my files under "/var". While this isn't really a big issue, when I originally installed Debian, I had the intention of having all of my files on a partition that I would auto-mount later so that when I upgrade my system by reinstalling it, I would only have to change the system partition and let everything else stay the same.. I can live without changing my /var if I can only do so by a re-install...
View 2 Replies
View Related
