I am trying to install SUMO- Simulator for Urban Mobility for past 2 days. I used the script here and it gets installed. The problem is I am not able to build GUI of SUMO- I dont have an executable of guisim after building everything.
View 7 RepliesI install sumo o.10.3 on suse and for install it i install proj ,gdal,fox and xcerces but after run ./sumo-guisim althogh the
correct window open but i have this error in command after closing this.
fatal: exeption not rethrown
aborted
what should I do?
what is wrong in installation?
I am trying to build a rpm that basically changes the root password on a system. Here is what my spec file looks like:
Summary: Update the root password
Name: update_passwd
Version: 1.0
Release: 1
[code]....
However, when I run a "rpmbuild -ba specfile", I only get a *src.rpm under /usr/src/redhat/SRPMS, but no rpm file. I have never created a rpm and was wondering if there is something I am missing in my spec file?
I have installed plplot-5.9 but i am unable to run or build or compile it. I have read the installation instruction and followed it but i am unable to install or build it
I am using ubuntu 9.10
I am getting obsessed with Linux OS up to the point of starting to swap MS OS.I opened WICD and it show (Wired network = 0 wired-default VVV and wireless network = C STR ESSID ENCRYPT BSSID MODE CHNL is this meaning that build in wireless card is or is not recognized? I will keep looking for info, although is hard to learn a new OS from scratch.
View 4 Replies View RelatedI am trying to build a Python module (pyfits) but I get the following error:
# python setup.py install
/home/steve/src/pyfits-2.2.2/stsci_distutils_hack.py:239: DeprecationWarning: os.popen3 is deprecated. Use the subprocess module.
[code]....
i am using Ubuntu 8.10 inside VMWare Workstation 6.i need to use folder sharing feature with my host OS XP2 but when i tried installing VMWareTools i cant build several modules including vmhgfs and vmblock.Code:Trying to find a suitable vmhgfs module for your running kernel.None of the pre-built vmhgfs modules for VMware Tools is suitable for yourrunning kernel. Do you want this program to try to build the vmhgfs module foryour system (you need to have a C compiler installed on your system)? [yes] Extracting the sources of the vmhgfs module.
View 1 Replies View RelatedIt compiles fine but at the end there's no binary RPM. I am able to make source RPMS just not binary. Here is the spec file.
[Code]...
I installed slackware 13 reacentlyi was trying to build wvstreams and wvdialwhen i give the ./wvdial.Slackbild it runs for quite some time and at the end while creating the package it gives me an error cannot find gzip compression utility in $PATH. and there is no tgz or txz package in /tmp folderthen i ran pkgtool and found that gzip isnt installed. the i installed it from the slackware dvd. but still i am getting the same error
View 1 Replies View RelatedI am a total noob in the process of trying to build my own server. I installed Ubuntu 10.10 but when I did that I didn't have the computer hooked up with an ethernet or have any internet connection. During the installation process it was unable to set up DHCP, so I figured I would just do that later, somehow.
Anyways, I recently hooked up an ethernet cable from the server to another computer, which has internet.
I've been slowly working my way through the Server Documentation and am on the Networking chapter. It has given me the commands to install wireless-tools, ethtool, dhcp3 server and I've also tried to install gedit. Every time it gives me the error: E: Unable to locate package XXX
When I ran the sudo lshw -class network command I find that it recognizes both an ethernet interface as well as a wireless interface(my wireless adapter). BOTH of them say *-network DISABLED.
My goal is to enable both of those, but I am assuming I need to be able to locate the packages first. I installed the server edition using a USB pendrive. I still have the files on the pendrive, but I don't know how to make the server locate those files. I'm guessing it wants to access the installation files to locate the packages to install.
before i get a lot of annoyed responses, I did check the forum and found a couple older previous threads on this topic, but they don't seem to really explain any real solutions to the problem im having.Here's the story- I was looking around for instructions and found this "howto guide" on installing nvidia display driver [URL]I went through the steps he listed:
downloaded the driver packages, install the dependencies from the shell, and then i pressed CTRL+ALT+F2 to get out of X and into text mode. I stopped my gdm with the command: sudo /etc/init.d/gdm stopand then i tried to install the driver using: sudo sh (on my NVIDIA driver- his version was a bit outdated compared to the one I downloaded)But here is where the problem starts, as I go through the installation process and click yes, i reach the "progress bar" then the screen says "unable to build the NVIDIA kernel module". and then it just exits. What is going on here? Am I missing some other package or file?
Have you managed to get madwifi up and running in Fedora 13? I have Atheros based Wi-Fi on my netbook and I couldn't build drivers on F13.
View 14 Replies View RelatedMy VMWare Player was working fine After updating the kernel it is throwing the error "Unable to build kernel module" my kernel is 2.6.40-4.fc15.x86_64 what to do?
View 2 Replies View RelatedI am trying to build a custom kernel but I couldn't. Here are the steps to reproduce it:
1. Set Up an RPM Build Environment as its is explained in [URL]
2. Then follow the instructions in [URL]
3. When I try to install the kernel source rpm I get the following error:
[matias@Centos ~]$ rpm -i [URL
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root . . .
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
error: unpacking of archive failed on file /home/matias/rpmbuild/SOURCES/linux-2.6.18.tar.bz2;4ba24901: cpio: read
On my opensuse 11.1 system. I used my tp-link tl-wn321g usb wireless adapter to access the internet. It runs on rt2501 chipset and I used the serial monkey rt73 driver from here.
[URL]
What I did was I installed the kernel-headers, kernel source, gcc and make. And then I cd to the module directory and did
Code:
make
make install
modprobe rt73
[Code].....
I installed "ralink-firmware-1.1-1.5.noarch.rpm" from Software.openSUSE.org. I tried "make" again, but still the same error return.
On my opensuse 11.1 system. I used my tp-link tl-wn321g usb wireless adapter to access the internet. It runs on rt2501 chipset and I used the serial monkey rt73 driver from here.
Code: [URL]
What I did was I installed the kernel-headers, kernel source, gcc and make. And then I cd to the module directory and did
Code:
make
make install
modprobe rt73
And then I configured the network with yast.
That was until I upgraded to 11.2 using the guide here.
Code: [URL]
The upgrade went well, but I could no longer use my wireless adapter. I tried installing the driver again but when I tried to run "make", it says
Code:
make: *** /lib/modules/2.6.31.8-0.1-pae/build: No such file or directory. Stop.
rt73.ko failed to build!
make: *** [module] Error 1
I've checked that kernel-headers, kernel-source, gcc and make are all installed.
I installed "ralink-firmware-1.1-1.5.noarch.rpm" from Software.openSUSE.org. I tried "make" again, but still the same error return.
I have a fresh installation of Fedora14_x64 and after that I have updated the OS also.
Then I have installed VMware-Player-3.1.2-301548.x86_64.
All the installation procedure has completed successfully without any error.
But when I am going to run VMWare It is throwing some error.
I am attaching all the needed screenshot and log file also.
I started slax in cli mode and tried to install nvidia driver before running X but it won't install. My log:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Jan 10 04:21:14 2010
option status:
license pre-accepted : false
Update : false
Force update : false
Expert : false
uninstall : false
Driver info : false ....
ERROR: Unable to build the NVIDIA kernel module.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details.
djmack-5/19/2011-I have purchased an ASUS K52J (intel i7) laptop. I have installed Centos 5.5 (64 bit) from CDs. The I got all the updates and it's now up to 5.6. I have two problems.
(problem-1) - Using the GUI (System->Administration->Hardware) I can get to a Device Manager screen. It shows a JMC250 PCI Express Gigabit Ethernet Controller. Using the GUI (System->Administration->Network) I can only see the wireless (wlan0) as configured and active. The ethernet card is not seen as ether 0. I've seen there are downloads to solve this problem, however I've been 100% unable to do and or understand them. I don't know how to build the kernel and I don't have any source code. I only have the binaries (I think). Is there a version of the kernel that I can put on CDs that has understanding of the ether card I referenced above?
P.S. I've downloaded a binary fix and it says it needs 20 or so dependencies (I have zero idea how to get those).
P.S. I've downloaded a source fix and I couldn't get it to install (I'm not a linux kernel build knowlegable person). I don't have the source either.
(problem-2):As stated above I need direct (RJ45) access to the laptop. I currently have the wireless card working but I have no idea how to get this to work with httpd, ssh, scp.I can access things via a web browser right on the laptop. I cannot access this laptop via a web browser from any other box. I cannot access this box via ssh or scp.I disabled the firewall and I disabled the SELinux security.I am stumped as to why I cannot see this ASUS laptop via httpd and/or ssh/scp.I can ssh and scp to other linux servers but these servers cannot ssh or scp into this laptop.
I'm trying to install the nVidia driver for a fresh Installation of OpenSUSE 11.4 (32-bit) but I'm running into some issues. I followed the instructions (SDB:NVIDIA the hard way - openSUSE) using the driver binary mentioned in the workaround link (NVIDIA DRIVERS 256.53 Certified) but the installer fails while building the kernel module with the following errors:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Mar 13 17:32:56 2011
[code]....
I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;
Code:
$ su - sbsbuild -c "ulimit -n"
Password:
[code]....
I'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:
1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.
2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.
What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.
looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.
View 1 Replies View Relatedas I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.
Code:
$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64
[code]....
Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
when i try and run the latest vmware workstation, i get an error at compiling virtual machine monitor it says: Unable to build kernel module. See log file /tmp/vmware-root/setup-7625.log for details. When i try and go to the folder vmware-root it says i do not have the required permissions. I'm on the latest 11.04, i really need this working.
View 2 Replies View RelatedAnt was installed in yast2 but will not run since build.xml was never created. How can this be fixed? I would like to run AudioTool.
View 5 Replies View RelatedI am trying to build a multiseat linux system(Build a Six-headed, Six-user Linux System LG #124). I am posting some outputs output of lspci | grep VGA
Code:
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
ls /dev/input/mouse*
Code:
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
more /proc/bus/input/devices
[Code]...
I am having trouble in configuring xorg.conf. I am running Suse 11.3 desktop on my PC. Also, I have one onboard nvidia graphics 6150SE and I have put one nvidia 8400GS 512Mb in the 16X PCIe slot for the additional seat...
So kindly tell me what should I do now or what things are missing ?? For any further info abt my PC plz tell me to post outputs(specify the commands for the same..)
how to build my web server on ubuntu
View 3 Replies View RelatedI'm building a perl rpm package, but cannot accomplish it under some conditions. I'm building the package on the Fed. 10 as this is my development distro. However the target machine runs on Fed. Core 4 and I cannot access it now in order to build the package there.
If, in the spec file I set 'INSTALLDIRS=vendor' the rpm gets created OK. If I set 'INSTALLDIRS=site', which is my final intention the rpmbuild cannot finish packaging. In the '%files' section the rpmbuild expects the man page to be in '/usr/share/man/man3' ( as to the %{_mandir} content ), however the man page keeps on ending in '/usr/local/share/man/man3' instead.
I tried to add 'INSTALLMAN3DIR=/usr/share/man/man3' to the %{_perl} Makefile.PL line, but still no success. I also performed some "queries" to figure out what may be the core of the problem and here is the result:
[zby@localhost ~]$ perl -V:man3dir -V:sitelib -V:vendorlib
man3dir='/usr/share/man/man3';
[Code].....