me using redhat on server and open suse on clint. when i want to ssh from my server machine the following error occur "connection refuse" i execute the following command on clien machine "/etc/init.d/sshd start" it shows the following error just after command execution "sshd re-exec requires execution with an absolute path"
View 6 RepliesI get something like:
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.2.10 |~~~~~~~~~~~~~~~~~~~~~~~~~~
(c) 2001-2008 The world wide DirectFB Open Source Community
(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2010-06-30 18:13)
(*) Direct/Memcpy: Using Generic 64bit memcpy()
[Code].....
when I launch (i.e.):
$ links2 -driver directfb
It's a brand new thing for me, maybe I'm misunderstanding some basic concepts.
I recently bought a new laptop (Clevo W760CU) and I've tried several times running 64 bits distros on it. Both Ubuntu 9.10 and Fedora 12 live cd's simply won't boot into X. They both seem to freeze at the very ending of the loading process. 32-bit releases of both work fine. Using the alternate install CD I managed to install 9.10 but when I try to boot it freezes immediately after the cursor appears (which I assume is equivalent to where the live cd's freeze). If I try recovery mode I can see the following error:
[ time ] BUG: soft lockup - CPU#4 stuck for 61s! [some program]
Where and which program it is varies. I've managed to install Archlinux and Windows 7 fine, both 64-bits. I haven't been able to update Arch yet because it wont't find my network card, as with Fedora 11 and 9.04 both of which install perfectly fine). It seems the kernels released in October or later cause my problems How can I fix this? I really want to be running 9.10 64 bit because I have 4 GB of RAM.
This system was first installed on a 120Gb dual booted hard drive with Debian split with XP. It grew into a development system spanning 3 drives and 360Gb.
The addition drives were NOT mounted under the standard unix conventions, such as sdb being /usr and sdc being /home. They are mounted as /drive1, /drive2. All ext4 (except for the /dev/sda1 XP partition).
For example opt is symlinked to /drive1/opt
Firefox is at /drive1/opt/firefox.
So far so good, and with 20,000 packages installed, the system does work. With however, some caveats.
Certain programs like apt, refuse to recognize symlinks. I cannot move its /archives to the other drives. Some other stuff seem equally recalcitrant. Especially stuff from the lower init levels (that is understandable as they are running before the mounting process).
But others are unexpectedly recalcitrant.
Is there any way to *force* systemwide respect for symlinks?
Reducing size of XP is a non-starter here...
Two video files on my external hard disk refuse to be deleted, renamed or moved. They keep giving the following error message
Error removing file: No such file or directory
or
Error renaming file: Input/output error
i've written a socket server. when i launch a client, it connects to servers running on various machines on my local network, which then reply to the client with some string messages, and the client exits.
however, when i launch the client repeatedly (say 5 or 6 times in quick succession) the client is unable to bind to its local port. this appears to be because servers are still trying to connect to the client machine's port, even though the client exited and shut the socket down. the actual error i receive is "Error binding socket to 192.168.1.6:44561: Address already in use".
so, is it enough just to shutdown and close a socket? is there some way that in doing so the client machine can send a CONNECTION_REFUSED message to any machine trying to connect to it? i am using PHP, not that that should make much of a difference i hope.
the problem resolves itself after around 20 seconds as the machines trying to connect to the client timeout. i still need to fix this issue though.
I am geeting this error whenever i am using the below command in ubuntu: ssh localhost
it shows the error unable to connect to local host at port 22:connection refused
[11.04 64 bit amd tx2500]
It seems ububtu is going backwards on driver support,
in 10.04 the driver support of my HP tx2500 was flawless,
and now the wired and wifi connections won't work:
ubunu does no recognize there is any wifi adapter, and the wired connection tries to connect and fails.
I installed the latest driver from realtek manually and no change.
I now have a .tar.gz that has been created during my script, and finnaly i need to upload it via ftp to my computer, but i am unable to because i keep getting the "Connection refused" error, despite the fact that all the syntax appears to be right. in a bout of frustration, i have deleted the code and now no longer have what i had written.. so could someone please let me know the syntax to upload a file to a server? I am aware that other threads have been started about this issue but I am trying to ftp from an iPhone to a computer...
View 4 Replies View RelatedI Get message Connection refused when trying to connect to other computer in network. My System Ubuntu:
computer1 ip: 10.0.0.1
computer2 ip: 10.0.0.2
computer1 shell:
$ ftp
ftp> open 10.0.0.2
ftp: connect: Connection refused
I got an error while working with NetworkManager in new RHEL6/ Fedora14. I have a ZTE AC 2726 3G wireless modem. i had tried to connect it via NetworkManager . It only requires username and password to connect but the thing is that after putting all the credentials i had checked the option" available to all the user "and while i was trying to save the profile it shows the following error saving connection failed 0 can't write connection type 'cdma'I had google so many times around this error but no better solution is there .
View 1 Replies View RelatedI am runnung ubuntu 9.10 desktop edition as a server. I am using a FTP client program to upload some files(index.html, background.png, etc) and everything is fine with that. And currently all my files are in /home/myname/ folder. What I want is whenever I log in with my ubuntu account in the FTP client program, I can actually see the list or contents of the very root directory.
In other word, I can see every folder like /bin, /boot, /etc, /root, so on in the FTP software and I can download it. I don't want to allow to access the parent(or root) directory. Is there any possible way to set up the sutff?
I'm using Slackware 13.0 on rather old PC with old Riva TNT2 video card. Default driver is "nv". Everything work fine, but without hardware 2D acceleration under X.
After studying various manuals I
1. downloaded Nvidia binary package suitable for my video card.
2. Recompile kernel without Riva framebuffer support.
3. Start Nvidia script.
Script said: "Error: unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured...""
Kernel sources are in /usr/src/linux-2.6.29.6 I have all kernel packages installed. I was trying various switches for script in order to show the right path - nothing! 8 Some people say that Nvidia script don't like 4th digit in a kernel's name and get it from "uname -r" output. Can I change it somehow?
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
I am running an Ubuntu Server on a VirtualBox VM running on my windows machine. So I've created a self-signed certificate using the following tutorial: [URL]
From this tutorial I'm left with 3 files:
server.key
server.csr
server.crt
Then I found this very similar tutorial that has an extra bit on installing the certificates in apache: [URL] So I followed it's instructions which boil down to this:
[Code]...
So I'm thinking this should work now. However in Chrome I get: SSL connection error Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have. Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error. IE8 gives me a typical "Internet Explorer cannot display the webpage" Note that [URL] fails while [URL] works fine, so it's definitely something in my ssl setup I'm thinking.
I am using Redhat 9 and get the message error establishing an encrypted connection to log in. Error code 8155. How can I correct this as I cant access sites to check my mail.
View 6 Replies View RelatedI have two machines X , Y . X is running on runlevel 5 while Y is running in runlevel 3 , I am trying to connect from machine x to y using X11 forwarding using the following command.
ssh -X username@IP
But i have the following error message.
"X11 connection rejected because of wrong authentication"
Both servers are running RHEL 4.7
i run ubuntu 9.10 64-bit, using firefox 3.5.6 (courtesy of ubuntuzilla) as my web browser. i've had a problem with some flash and/or shockwave objects simply refusing to work inside firefox, despite having 64-bit flash player and all necessary plugins/addons/extras etc. installed.
there is no pattern to the problems, other than all of them being flash or shockwave objects that won't play. the majority of videos videos do play, including hd ones. however, this morning i encountered a pair of videos clips that simply would not play. i could load the page they were on, but all i ever saw was a black box, with no audio, where the video should have been.
i also noticed that on some of the videos that do play, the flash player's built-in volume control does nothing. i can slide it up or down or mute it entirely, but the sound from the flash video is unaffected.
i'll post urls of the problem videos later, so others can try them.
meanwhile i was able to watch other videos videos without issue, on another tab, aside from the broken flash player volume control.
i've also had a problem with the [url] player for a radio station, which i believe uses shockwave. i like to listen to atlanta, ga's wsb 750 am radio in the mornings before work, but so far i have to do it on a virtual windows xp machine running firefox 3.5.6, under virtualbox. if i try to open the player in firefox 3.5.6 running in the host os (ubuntu 9.10), i get only a blank popup window. url is [url]; click the "listen live" box at upper left to try it.
both machines, the host ubuntu 9.10 install and the guest windows xp machine, use exactly the same ad-blocking hosts file. i use the noscript addon in the host os install of firefox, but i allow any and all scripts when visiting the radio station's website.
since the streaming radio works on the virtual xp machine, i'm pretty sure my network configuration, hosts file etc. have nothing to do with this.
has anyone else had this problem? the flash content really should be agnostic with respect to the host os and browser, shouldn't it?
i guess it could be some random problem with the 64-bit vs. the 32-bit version of the flash plugin, so i may try instaling 32-bit ubuntu on a virtual machine to find out whether there's a difference.
I've used fetchmail for quite a while now and never had a problem, until (without having changed anything) today it suddenly quit working, giving me the error message:
fetchmail: connection to localhost:smtp [127.0.0.1/25] failed: Connection refused.
fetchmail: SMTP connect to localhost failed
fetchmail: SMTP transaction error while fetching from stefan%mydomain.com@mail.mydomain.com and delivering to SMTP host localhost
fetchmail: Query status=10 (SMTP)
I googled the error message, but didn't find anything that look promising. I use ubuntu 10.4.
We have one FTP server. Users are uploding files to the perticular directory remotely. but today some users got below error message.
421 Service not available, remote server has closed connection.
(vsftpd service is up and running) What are the possible causes for this error and from where I should start troubleshooting?
When I do an amcheck, I get this Amanda Backup Client Hosts Check WARNING: noname.com: selfcheck request failed: recv error: Connection reset by peer Client check: 1 host checked in 0.022 seconds. 1 problem found.
I am using bsdtcp. I get an ack error if I switch the client to bsd authentication. What should I do, how do I fix it? I read that I should enter servers address to hosts file in /etc/ directory? Here is the log in /var/log/messages:
[Code]....
root@debian:/etc/network# ifup wlan0
SIOCSIFFLAGS: Unknown error 132
SIOCSIFFLAGS: Unknown error 132
[code]...
I am trying to backup a client called greetings.com, but when I do an amcheck on the server, I get:
WARNING: greetings.com: selfcheck request failed: Connection refused
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedI am facing some strange problem of mysql replication with ssl, my replications which working fine from more than 6 months currently stopped working after i upgrade mysql in to newver version mysql-5.1.41-2, i create new ssl self singed certs but still no sucess, when client try to connect the master using ssl its gives error SSL connection error ERROR 2026 (HY000), with out ssl its working f9.
Platform --> Fedora-11 + mysql-5.1.41-2 (both master/client)
I can seeking the problem on net, and i found the below bugzilla url related to that.
[url]
I read it but not get , either new version support x509 ssl certs or not or either new version support ssl replication or not, here below my server configuration for ssl serts
And for client
Both server and clients certs are signed with same ca but still its currently not working after the mysql upgrade first 5.1.41 and then 5.1.41-2
Either as above bugzilla url, currently mysql support ssl replication or not, or either some need to do special for working with ssl. or i wait for newver version of mysql to fix if its bug or not.
What are openSuSE's plans as to the release of an rpm with openssl-0.8.9m which has the solution to the renegotiation man-in-the-middle attack, not just turning key renegotiation down?
As a companion to this version of openssl Apache HTTP 2.2.15 would be very desirable, as it incorporates a patch that allows - at the site's discretion - to refuse or accept the insecure "old-style" key renegotiation.
I have just visited this page here, Updating openSUSE - openSUSE I have been trying to update my OpenSuSE system for a week now and I have absolutely no idea what causes this problem. The update would start but would stop right in the middle and refuse to install some pulseaudio(...) package... It would indicate that network is down while I am sure it is up.
I am behind a proxy and I have again and again made sure that the proxy settings are correct and alright. Since it downloads some of the packages in the start I believe my connection and settings are OK. Maybe the SuSE server is down, but not for a whole week, I don't think so. I would also like to mention that I have only tried updating through YaST GUI and I am, as of yet, unaware of any console or command-line methods of updating.
I really would like to update my system because I happen to be paranoid in matters of computer security. (Just kidding) But since I cannot install any updates it should mean I might have problem installing new software. So my digital life is literally crippled because of this problem.
I am now using SLES11. My web server now error mysql. However, when I restart mysql using "rcmysql restart" the message display:
Restarting service MySQL
Shutting down service MySQL done
Starting service MySQL done
but when I start to access via browser using my name virtual host (url) the message display "Error establishing a database connection"
when I go to mysql using command "mysql" the message display"
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
After that I try to edit file mysql.sock but on the bottom of file display message (permission denied)
Ive recently switched over to AT&T Uverse TV/Internet service and I've noticed that when I ssh into my linux( 2.6.18-194.3.1.el5xen CentOS) server I get disconnected. When I'm using putty it gives the "network error software caused connection abort" error. When I'm at work using one of our jump servers and ssh'ing from the command line it will freeze up from time to time but never disconnects. I think the problem is either with the OS or the new AT&T modem. At first I had my CentOS server using DHCP and it would disconnect within a few minutes after I ssh'ed. I switched over to a static IP and now it goes about 10 minutes before it disconnects. It doesnt matter if I'm actively typing or not, so it's not an inactivity issue. I have the firewall turned off on my laptop, and since the issue happens on multiple devices, including my iphone I dont think thats the issue.
I have iptables and selinux turned off/disabled so thats not it. In putty I have enabled Keep Alive(30 seconds) and it still disconnects. I opened the port on the modem to allow ssh for the IP of the linux server. Ive also recently reinstalled this server with CentOS so I can't compare with the previous internet provider as I didn't reinstall until after I switched over. BUT previous installs with CentOS 5.2 worked fine with the previous ISP. AT&T Modem is a 2wire 3800HGV-B