General :: Sis 5595 Module Not Detected
Mar 1, 2011
I just started working on older machine and upn boot it says
Code:
sis5595_smbus 0000:00:01:0 SIS5595 not detcted, module not inserted
sis630_smbus " " SIS630 comp. bus not detected " "
These 2 are in a bug report, but haven't seen any documentation to resolve or should I say insert modules. [URL] The computer actually boots to the desktop, origianlly ony boot to console Also sound card cs46xx not installed, I've tried to patch, but fails "./write_images" [URL] After posting I ran lspci -knn does this mean that the actual modules are loaded?
Quote:
root@debiandram:/home/dean# lspci -knn
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 620 Host [1039:0620] (rev 02)
Kernel driver in use: agpgart-sis
[code]....
If i2c is loaded then do I ignore sis-5595 errors? Is this related to the missing floppy drive
Quote:
sis630_smbus " " SIS630 comp. bus not detected " "
View 4 Replies
ADVERTISEMENT
Mar 7, 2010
Have an Epson Expression 1640 XL A3 scanner (usb & network interface card). Bus=0002 Device=004 its usb ID is 0x04b8 0x0109 I have never been able to connect the scanner using the network - if anybody can advise, I would be very grateful. Quite happy to use this if usb is going to be a problem The scanner has worked very well through the usb and wask working well with 9.04(32bit). I have bought a new machine and did a fresh install of 9.10 (64bit) and the scanner is not detected.
xsane detects my webcams (vl4:/dev/video*)but no scanner Have run sudo xsane-find-scanner - only the webcams are detected Have edited /etc/sane.d/epson2.conf - added scanner usb ID, and added the lines:- usb /dev/usb/scanner0 usb /dev/usbscanner0 as advised in one of the threads in this forum sudo scanimage -L gave this-
WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect
device `v4l:/dev/video1' is a Noname Creative Labs Webcam Pro Ex virtual device
device `v4l:/dev/video0' is a Noname Logitech QuickCam Pro 4000 virtual device
[code]....
Do I need to select M for these three modules?
the following had [M] -
USB Printer support
Microtek X6USB scanner support
It looks like the scanner module has not been loaded, and possibly the usbfs yet usb webcam and card readers are accessible. I have tried to keep outputs relevant & short. If I have omitted anything, you would like full results or any other information.
View 1 Replies
View Related
Nov 20, 2010
I have just started to work on Ubuntu (Ubuntu 10.4 LTS) and I am having some problems to get a WUSB600N vers. 2 802.11n adapter working. I have followed the procedure described at [URL] . The compilation has been successful and I can see the kernel loaded an the module detected:
Code:
adrien@ubuntu:/$ lsmod | grep rt3572
rt3572sta 612272 1
adrien@ubuntu:/$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
The wireless adapter is detected by the system and it can scan the neighboring APs (cf. below with MAC address made unreadable):
Code:
adrien@ubuntu:/$ sudo iwlist ra0 scan
[sudo] password for adrien:
ra0 Scan completed :
Cell 01 - Address: --:--:--:--:--:--:--
Protocol:802.11g
[code]....
View 2 Replies
View Related
Apr 22, 2010
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies
View Related
Jan 30, 2011
I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
View 3 Replies
View Related
Sep 27, 2010
I have custom built Linux kernel (2.6.31) and also xorg. xorg is using xserver 1.7.3 . I have an application which simulates the mouse and sends mouse move events. When I switch the device on, the system boots and Xorg comes up, I can see X cursor on the system. When I start sending mouse move events from the application, the cursor do not move. If I attach mouse to the device and then move the mouse, from this point onwards the mouse events get detected from the simulation application. I have checked the dmesg log as follows
BEFORE MOUSE CONNECTED.
.....
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
[code]....
View 1 Replies
View Related
Mar 25, 2011
i installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said
failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.
View 5 Replies
View Related
Jun 23, 2011
I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:
(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[code]...
View 2 Replies
View Related
Feb 22, 2010
What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies
View Related
Mar 3, 2011
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies
View Related
Jun 1, 2009
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
View 3 Replies
View Related
Jan 28, 2010
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
View 1 Replies
View Related
Jun 8, 2010
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
View 2 Replies
View Related
Jan 28, 2010
OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
View 3 Replies
View Related
Jun 27, 2010
I am interested in using fortran and an external library called matio used to save arrays to matlab .mat files. I have installed the matio and matio-dev packages from synaptics but i cannot compile a code receiving an error Code: christos@christos-laptop:~/Desktop$ gfortran -o test test.f90 -lmatio -lz test.f90:2.13: USE MATIO 1
Fatal Error: Can't open module file 'matio.mod' for reading at (1): No such file or directory How can i load a module in order to use it in fortran through the GCC compiler?
View 1 Replies
View Related
May 8, 2011
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
View 5 Replies
View Related
Aug 17, 2011
When opening gedit as a user I get the following message
Gkt-message: Failed to load module "'pk-gtk-module"
If I try to open gedit as root I get the same message but with other messages. These are shown in the attached file. gtk.txt
This is on an upgraded machine using the preupgrade method. The same has happened on two machines upgraded from F14 to F15 the same way. 64 bit systems.
How to clean this up so the messages do no appear?
View 4 Replies
View Related
Jun 8, 2011
I am using Redhat linux 5 version 2.6.18-164.e15 with platform i686. I need to add ntfs module. I execute following command
#modprobe ntfs
but it say FATAL: Module ntfs is not found.
View 1 Replies
View Related
Apr 12, 2010
How can I find out WHAT is using the module? Which program?
View 4 Replies
View Related
Jan 31, 2011
I have dual booted my system with fedora12 and win7. I hv a wi-fi internet connection of Airtail via router.The wi-fi gets detected in win7 bt nt in fedora12when I connect thru cable then i get connected in fedora as
View 2 Replies
View Related
Aug 18, 2010
I have a Samsung phone GT-B3210. For some time I was unable to find working Windows drivers for it. I eventually gave up looking. Then one time I was charging phone over its USB port and booted Ubuntu and was pleasantly surprised when I saw phone's μSD card reader on my desktop. I now need to switch to Gento and would like to be able to work with phone there too. Lsusb tells me it's detected as Bus 007 Device 006: ID 04e8:663f Samsung Electronics Co., Ltd SGH-E720/SGH-E840but lsmod wasn't very helpful. On the list of loaded modules, I wasn't able to find one which looks like it's related to the phone.
View 1 Replies
View Related
Feb 4, 2010
I want to delete 'processor' module, but simple modprobe -r doesn't work:
Quote:
$ modprobe -r processor FATAL: Module processor is in use.
How can I do it?
I guess it's natural. Processor module allows the cpu to go to C1-C3 states (in my case). It may be possible to do it brutally, by running a superfluous process to force C0, but I'd like a sophisticated way.
The reason I'd like it is I'm troubleshooting hibernation (s2disk). According to [URL], it's worth trying.
View 2 Replies
View Related
Jun 13, 2010
I am a newbie and I am compiling a kernel in order to reduce the bootup time. I have a question as follows.
I am trying to remove a module. I used rmmod and modprobe. I can remove the module, but it is loaded again after reboot. How can I remove a module permanently? The module that I am trying to remove is lp.
View 5 Replies
View Related
Sep 7, 2010
I was trying to install dm-ioband on a fedora 13 OS with Linux kernel 2.6.32.21. I apply the patch. Compile the modules and give module_install. When I do modprobe, it says dm-ioband module not found. When i checked the Kconfig file inside the drivers folder, i cannot find the dm_ioband patch applied to that file. As per the patch file, it should paste some 10+ lines in Kconfig file on line 320. But I dont find line 320.
View 1 Replies
View Related
Jan 31, 2011
I am having a problem while inserting a particular module.
Following are some prints :-
I am using STLinux-2.4 Distribution, kernel 2.6
I have changed the access permissions on all the .ko as rwx. Still I am getting the problem.
View 2 Replies
View Related
Apr 2, 2011
I want to blacklist one module in RHEL 4.5. In RHEL 5.X we can remove the module using modprobe and then blacklist it in the file /etc/modprobe.d/blacklist to make it permanent after reboot. But in RHEL 4.5 there is no such file like /etc/modprobe.d/blacklist. So how to blacklist a module in RHEL 4.5
View 3 Replies
View Related
Aug 10, 2011
I am a new administrator and am running SLES 11 on a VM. I have openssl installed, but when I attempt to compile an add-on module to Nginx I get the following list of errors:
[Code]...
View 3 Replies
View Related
Jan 11, 2011
I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia...Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there):
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010
Section "ServerLayout"
# Removed Option "Xinerama" "1"
[code]...
View 1 Replies
View Related
Jan 5, 2010
Hardware : Intel atom (COM)Audio - ALC 888OS : Ubuntu 9.04Observation : Sound Card not getting detected.-> I downloaded High Def. Audio Codec as "LinuxPkg_5.13rc9.tar.bz2" from RealTek site, compiled and installed the drivers.-> But while installation I got a GUI saying "No PnP or PCI audio card detected".-> lspci command shows all other pci connected devics except sound card(ALC888).->I tried recompilation of Linux kernel to make HDA Codec as a Built-in modules (built-in ALSA driver support) ,but still there was no change in behaviour.
View 5 Replies
View Related
Jul 1, 2010
Hi I am getting this error::
*** glibc detected *** ./a.out: free(): invalid next size (fast): 0x084ed538 ***
======= Backtrace: =========
/lib/libc.so.6[0x4df851]
[code]....
View 1 Replies
View Related
