Is redhat satellite an installable rpm package. does it only come on RHEL5 Advance server or can it be installed on RHEL5 or RHEL 4 server. i am asking this becuase i would like to learn how to use Redhat Satellite.
View 1 RepliesI can't get Redhat (Fedora) to mount my usb Flashdrive. My windows O/S has no problem with my usb flashdrive. I can mount my CD Drive and my Floppy drive. My mouse is pluged into one of my usb slots and it works. What am I doing wrong.
View 1 Replies View RelatedI was attempting to install the package 'gnustep-devel', but the package 'gorm.app' which gnustep-devel depends on is not available. I've checked in Synaptic's Settings->Repositories and I have all repositories enabled, and the package is available via a Debian repository... I'm pretty sure that there's a better place to report it than here, but I don't know where that is.
View 4 Replies View RelatedTinking around and found "likewise-open-server" as an installable package. I installed it, but cannot find it anywhere in gnome. Anybody know what this package does? How to use it? I googled it but can't find much.
View 1 Replies View RelatedI just installed Redhat Enterprise Linux version 5.1.x on my computer and need to install/add the package for gcc.
View 1 Replies View RelatedI would like a new linux distro. I've been using ubuntu for like 2 years or more and I'm just done with it. Some things that I want out of the new distro are:
Since I like learning, I want the distro to NOT be so user-friendly. I want a challenge. Just anything new to learn would be amazing. I need wireless support out of the box though, since that's the only source of internet I have around here.. I need it to be installable from usb, since i'm using a netbook without a cd drive.
What's the name of this program? [URL] I wanna install it on Mint 9... And there's no "figure" in repositories:
aptitude search figur
p configure-debian - central configuration program for packages using debconf
p libclaw-configuration-file-dev - Class to process configuration files
p libclaw-configuration-file1 - Class to process configuration files
[code]....
am trying to install oracle 10g on my redhat 5.9 which is on vmware 7.0. I follow an installation guide from oracle which instructed me to install some package to enable oracle installation when run ./runInstaller and to install oracle it later tell me gcc-3.2 package is missing when checking for package requirements for oracle I down loaded the gcc-3.2. rpm package and tried to install it this is what happens
[Code]....
I cant mount a directory on red hat 5 from red hat 4 using fstab.I keep getting permission denied.I mount directories on the same red hat 5 sys from other red hat 5 and 2 old HPUX systems using fstab.When I try to telnet to it i get "no route to host."
View 3 Replies View Relatedhow to configure satellite connection dvbs technic set cards
View 3 Replies View RelatedUgrib doenst run under wine; any cluye to fix it what should i do to provide a connection service like a dial up in windows [program to use, procedure] which can be used in ugrig when declaring immarsat
View 6 Replies View RelatedI have installed Ubuntu and I make all the configurations in order to have it like I want it....My question..... Can I make an iso file somehow (cd/Dvd) of my system with all the configurations, all theservers, all the custom thinks and the home folder's content in order to have it as backup (quick installable backup) and in case of a damage to install from cd/dvd again and everything is in place?
View 1 Replies View RelatedI recently purchased this laptop and I've setup Kubuntu and Linux Mint on top of Windows 7. Everything runs well out of the box except that the system occasionally freezes and the only option is to hold down the power button and reboot. The question that I have is where could I look to begin to identify the problem? Which log files would record a potential driver issue that would be causing this freezing?
View 13 Replies View RelatedWhen I installed Ubuntu server, I was shown a nice list of services I could add on if required. When I installed Ubuntu through the netboot network installer, I was shown a even bigger list. Now that I have the desktop, how do I see it again? Do they each have a name? I remember seeing LAMP server, DNS server, some cloud hosting services etc ..
View 2 Replies View Relatedcreate a USB stick from where one can install either Ubuntu x86, x64 and Server x64.
Copy each CD image into three subfolders on the stick and then have a menu choosing what type of installation it should be?
Does Ubuntu have the equivalent of a Windows .exe self-installable file? If so, what is it called? I seem to remember installing LimeWire on Ubuntu a while back and the file I downloaded was self-installable. Is there a place where Ubuntu programs are available for download as packages that install themselves?Why are most programs for Linux not self-installable, like .exe installers in Windows? Is there a security advantage to most programs not being available for download a single automatic install file? It would be much easier for me to go to a program's website, download a single file that installs by itself, and be done with it.
Also, why is it that, unless you install a program in Ubuntu using synaptic package manager, the program cannot be uninstalled under GUI? I really love Ubuntu, but find that even having simple control over installing and uninstalling programs is a real pain. I would love to go to LibreOffice's website, download a single file for Ubuntu that would install the entire program, install it, and be done with it.
I am trying to install ubuntu on an old machine and no matter what version I try to install I get this same error.
"No installable Kernel was found in the defined APT sources"
The versions I have tried are (9.04server. 9.10desktop, 10.04 server).
I have swapped both the CD drive and HDD drive becuase, well i don't know why, but I have. This didn't work.
I have read [URL] and have tried changing my BIOS settings so that i have my config is:
IDE Primary Master : Maxtor 6Y080L0 (HDD)
IDE Primary Slave : HL-dt-st-sl8480b (CD-DRIVE)
This didn't work.
I have also tried doing the instructions posted by migraineman on the second page of the thread mentioned above but this also didn't work.
My specs are:
Cyrix 6x86 Processor
80Gb Maxtor HDD
LG-GCE CD-ROM Drive
319Mb RAM - 8Mb Shared
I had Windows XP working. I then put in a new hard disk and installed Redhat 5 on it. rom then i could only boot into Redhat. Further, everyting is very slow. Anothe rproblem is that Redhat does not see my netwrok so I cannot get onto the Internet. I need to have the choice of booting into XP or Redhat.
View 2 Replies View RelatedI am currently trying to install Debian 8 "Jessie" AMD64 on a Dell Latitude E7240. I have two 256 GB SSD disks, on the first one I have installed Xubuntu 14.04 successfully. I want to install Debian 8 (XFCE) on the other one.I have tried using Debian-8.0.0-Live-amd64-xfce, Debian-8.0.0-amd64-DVD and Debian-8.0.0-amd64-netinst, all from a USB key (prepared with Unetbootin), but after successfully partitionning SSD disk, the installer raises the following issue:"no install-able kernel was found in the defined apt sources".
View 3 Replies View RelatedI have installed debian on my dell latitude d630 laptop and am currently making a derivative for others to use. however I can't get the wireless to work. I downloaded it from the broadcom site but it comes as a gzip file instead of a deb file. if I extract the gzip file I don't get any installable (deb) files. I need the wireless to work because now a bridged network from my windows laptop isn't working.
View 3 Replies View RelatedAm running Maverick RC1 and when I try to install adobe-flashplugin in synaptic I get the message " Depends:libgdk-pixbuf2.0-0(>2.21.6) but this is not installable".
View 5 Replies View RelatedI am running Ubuntu 10.04 and WINE 1.2. WineHQ APPDB states that Rosetta Stone is not installable. I have installed it, so the information there is not correct/complete. When I installed, it ran perfectly. I created an ISO of the install disc and the first lesson. I then loop mounted each of them in turn for them to run and assigned each of them a windows directory, configuring them as CD-ROM. This worked perfectly the first day. Now it no longer works with the ISO or with the original disc. I have run the program in terminal and received the following output:
Quote:
err:ole:CoGetClassObject class {96749377-3391-11d2-9ee3-00c04f797396} not registered
err:ole:CoGetClassObject class {96749377-3391-11d2-9ee3-00c04f797396} not registered
err:ole:create_server class {96749377-3391-11d2-9ee3-00c04f797396} not registered
fixme:ole:CoGetClassObject CLSCTX_REMOTE_SERVER not supported
err:ole:CoGetClassObject no class object {96749377-3391-11d2-9ee3-00c04f797396} could be created for context 0x17
[Code].....
I have seen similar outputs on the forums, but nothing that included that AUDIO ERROR. This seems to be an issue of time. If I don't do anything, the program will crash giving me error 5118. If I run through lesson select and mic testing quickly then I can get all the way to the lesson before it crashes with the same error.
I need a console based file manager for 10.4 and my beloved mc is no longer installable.
View 4 Replies View RelatedIs there anyway to show package size that comes up in the search so you don't have to apt-get install package individually and wait for the installation initiation and then reject to install after it gives u the [y/N] confirmation thing?
View 2 Replies View RelatedI want to install kernel package by this command sudo apt-get install kernel-packagebut it gives me the error :Package kernel-package has no installation candidate
View 1 Replies View RelatedI installed ubuntu 10.10 on my laptop and configured a lot(mainly setup git, heroku, rails etc), installed and setup lot of things on it to suit my needs. Now I want to move this setup to another machine and want to avoid all the setup again. Is there a way I can create an installer out of my existing ubuntu installation/partition which I can reuse for other machines?
View 2 Replies View Relatedi need to ftp from a windows xp pc to my redhat 5 system. Cant login.
I also need to ftp files to hpux and other ftp servers and this doesnt work either.
I'm not a subscriber to the redhat network.
I m kapil sharma i want to configure ICS in redhat linux 5.0?i have an IP address which provided by ISP.i want to configure linux server which forward packet in my internal network.i want to access internet in my internal network with configuring linux web server.
View 5 Replies View RelatedHow to install vim on Redhat 5.
View 5 Replies View RelatedI'm a Windows SysAdmin and we currently have a half dozen CentOS 5.5 machines at my current job. I also use Fedora 14 at home. I've been trying to get up to speed on Linux and feel like sticking with the RedHat derivatives as opposed to trying a new distro whenever something new comes out has really helped me.
I have a job interview coming up and it sounds like something I'd really like. They have an upgrade of VMWare from 3.5 to 4.1 in the works and virtualization is really my focus right now. Anyway the guy told me that they use SUSE and he really doesn't like RedHat. I don't remember how he described it, but he made it sound like it was too specialized and SUSE is more open.
This is the job description. Experience with MS Windows 2000, 2003 and 2008, Active Directory Architecture, deployment and group policies Red Hat and Novell SUSE Linux Enterprise server (SLES), OES NetWare (On Linux).
Experience with multiple virtualization products including VMware ESX and VMware desktop. Experience with tools used to analyze and perform bulk changes to LDAP directory content including Apache LDAP studio and MS Access. Experience with XML, LDIF, VB script., SSL and secure communications, SLP, DDNS, YAST, RPM, PAM., CRON, Sniffer Pro and Wire Shark . Is going into a SUSE environment going to screw up all the good linux mojo I have going on? I like working in Fedora/CentOS now. Is there a real difference?