I installed ubuntu off of my laptop and put the Ubunto file system on a 1TB hard drive off of a drive enclosure. Now the only way I can access Windows is if the drive is still connected to the laptop. NO EXTERNAL HD No BOOT MENU when I boot up.
View 4 Repliesubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies View RelatedI had a drive that kept kernel panic'ing so my data center recommended using the spare hard drive to reinstall OS on, and import the data from the old drive. (they checked the hardware, it wasn't the hardware) The new install is done, and I need to mount the old drive and get backups off it since my data center does not provide management whatsoever.
It's the same OS on both (Cent OS 5.4 32-bit) I'm an advanced user on windows, but linux gets me. I can ssh in, do basic stuff like setup IP ranges and restart services. I normally navigate the box through SFTP so I have a gui. WHM shows me my drives as such
Found Disk: hda
Found Disk: sdb
so I'm assuming SDB is my old drive and the drive I need to access. I attempted to follow instructions on
cyberciti.biz/faq/freebsd-adding-second-hard-disk-howto/
but I'm assuming FreeBSD would work differently and I wasn't totally sure what the labels of the file systems should be.
as mentioned in the header I have 2 HD's
The C drive runs on Win7
I would like to load the latest Ubuntu on the D drive but cannot find any info on how to do this on the ISO disk.
I have a 1.5TB Western Digital Caviar Green in a USB 2.0 external setup with an ext4 file system. I'm going to purchase a 2.0TB Western Digital Caviar Green in a USB 2.0 external case, copy the data over and put my 1.5TB in a fire-resistant box in another house. I'm worried about a couple things however:
(1) I'm worried about the long-term viability of _any_ file system years into the future. I've been storing my data on hard drives (instead of CDs, DVDs or BDs) for years now due to their higher reliability than optical disks. However, the file system used in optical disks is UDF which I think has much longer viability into the future. I'm not going to store terabytes of data on optical discs of course, so I'm wondering what I should choose for a hard drive file system. FAT32 or NTFS (due to Windows' 90%+ presence on the desktop, including still being used by Windows 7) may be the best choice, but I much rather have a open source file system, especially one that allows for permissions, timestamps, etc.
(2) As for my 2TB hard drive that I will be using for a while into the future, should I continue to use ext4 (I've had no problem with it thus far), but is there another file system that has better performance when storing and transferring gigs of data?
I've been installing/tweaking F12, and I've found something that I can't say I've ever seen or expected to find before: the contents of my ~/Documents folder has lost its permissions and ownership info. I restored it from a backup last night/this morning, and I've rebooted a few times since then. Other folders from the backup are OK, just Documents.I don't know what my options are. I could try to blow it away and restore it, but that doesn't answer what caused it. If there's a "relabel" or something, that might help... though I've never had to do it before. Could it be that after these two-and-some-change years, my hard drive is giving out? Good thing I have a recent backup... but it'd be a shame to lose all my work getting F12 to work again.
View 4 Replies View RelatedWhat i really need to know is if there is a way to access a Ubuntu file system on a hard drive from a live CD. When i acess it now it just shows the Windows files on it, and i cant access the Ubuntu partition. What happened was this: I was trying to install Ubuntu on an external hard drive. I moved all the settings to the Hard drive so i didnt think it would affect my other drives. I mustve missed one of them because insteading of loading GRUB like it normally does, it came up with GRUB error 21 and did nothing. I tried to fix it, but nothing worked. I finally decided to unplug everything except the external and install it from there, so id atleast have a functioning desktop. As it turns out, my comp doesnt suport USB booting. So the only way i can use my computer is by Live CD. I was trying to fix things so i had both hard drives power supply unplugged. being slightly drowsy from staying up late that night, I plugged them in while my computer was on. the first one went in just fine, no problems. The second one though, also my master drive, i was having troubles pluging in. while i was turning it to fit in, it made a big spark and shocked my master drive. That drive had my MBR and Windows on it. Now It cant find a MBR, and i cant access the ubuntu partition on my slave drive. Is there any way to save this?? im 99.9% sure ive screwed myself over hardcore epically, but im hoping to save at least 1/2 my data.
View 3 Replies View Relatedwhen I load into Ubuntu 11.04 from my USB drive, why can't I access the files on my internal hard drive? I mount the drive but I cannot see any of the music, videos or documents contained on that drive (which is also an Ubuntu 11.04 drive). I was wondering so I could copy those files onto my external hard drive and reinstall since my Ubuntu crashed.
View 3 Replies View RelatedWhat file system should I use to partition a slow and old hard drive? I know that ext2 was best for old computers which mine is not but I am using an old hard drive for extra storage and I was curious if anyone knew if using ext2 or ext4 would show any performance differences.
View 4 Replies View Relatedi needed to change my external hard drive's file system from ext3 to fat32, to use it in windows, which i did the simple way: i shrunk the ext3 partition, made a fat32 partition, copied the files over, removed the ext3 and made the fat32 bigger. unfortunately, while gparted was making the partition larger, my computer shut down. i lost all my files and the partition messed up immediately. i made a new fat32 partition, after deleting the old one, but noticed that gparted was showing 100 gigs already in use (???). so now i have a 300 gb hard drive with only 200 gb i can use; i ran df to make sure gparted wasn't messing up, but indeed it shows the partition as being only 200 gigs in size. i haven't tried making any other kind of partition yet, such as ext3, for fear of losing my files again, and because it wouldn't be permanent anyway, because i need those files in windows and stupid microsoft won't make their OS ext3 compatible.
View 2 Replies View RelatedI have a Toshiba laptop that seems to be freezing on extended operations involving the file system/hard drive. (that's kind of a guess on my part). The system has frozen during the last day or two when I:
- try a large file operation with Nautilus
- try exporting a large video file from Kdenlive
- try formatting the disk for a new install of Maverick (I decided that with the new version almost out, I might try upgrading in case I broke my system)
What I see is the screen freezing and the mouse does not move. As I said, I tried installing the Maverick RC from the Alternate CD (I wanted to do a minimal install). The install hung on the partitioning step and the caps-lock key started blinking (though I don't get this in other cases). I have booted into my Lucid live-cd and a Puppy live-cd to try Gparted, with the same results - the system freezes (but the caps-lock key doesn't blink). Puppy HAS performed better generally, for example I was able to complete my large file operation (backing things up!) but it is freezing on the partitioning step.
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
Something caused my Fedora 11 system to reboot this evening, only it keeps trying to boot from a CD/DVD. I get to a prompt that says "Boot from CD/DVD" and then it appears just to wait. I can insert my Fedora 11 installation disk and boot from it in rescue mode, and then I can see my entire file system, so I don't think the hard drive has failed. The system just doesn't seem to want to boot from the HD any more. I can get to a command line using the Fedora rescue mode, but I don't know what to do once I'm there.
one additional note. Around a month and a half ago I deleted some files by mistake and wanted to try to recover them. I tried a bunch of approaches that I came across (none worked), and I do remember that one of them had instructions to unmount a portion of the filesystem to protect it from being overwritten before I could recover the files.
Unfortunately, at this point I have no real memory of exactly what I did, but the system has been working fine since then. I would have thought that I had rebooted since then, but it's possible that this is the first time I've rebooted. Could I have unmounted some part of the file system such that it would still by unmounted even when rebooting? How can I check this from the command line I get in rescue mode? (My file system gets mounted under /mnt/sysimage/)
I would like to setup a CentOS file server with LVM and Raid1. Having 6 x 500GB drives, 4 x 1GB Ram and a Quad Core Cpu, I am considering to configure 3 hdd as LVM then raid 1 to the remaining 3 hdd's.
View 7 Replies View Relatedjust wanted to know if you can load more than one linux operating system on one hard drive? is it just like having windows and linux? I'm using ubuntu now but I really like opensuse as well.
View 2 Replies View Relatedhard drive formatting, compatibility with Macs, and Windows Etc, suggestions? GUID APM or what else? can I format a hard drive on a linux system that will be compatible witha Mac?
View 3 Replies View RelatedI have to locate and display the findme file on an XFS file system but the file is located on a second hard drive. The hard drives area number sda1 and sdb1know to change a directory, you use the cd command but I cannot remember how to do it for another hard drive. I tried cd /dev/sdb1 but I know that is not correct
View 1 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedI have a problem with my hard disk...this HHD had no OS just data in some linux file system....i tired to plug it in a windows OS and backup the files....but now the HHD file systems shows RAW. Now when i plug in fedora 15 OS the HHD is not mountable. I tried to # grub-install /dev/dbc1 but it give me an error. error "Bios driver not found" What can i do to restore my file system so i can recover my data?
View 2 Replies View RelatedMy parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
How can I retrieve the block number(s) of a certain file in a file system (the blocks the file is using on the harddisc)?
I'm using the gentoo linux based SystemRescueCD, so I got plenty of tools installed which might get that information for me.
Image Hard drive Ubuntu Operating system 9.10 Complete back up and restore. Changing over Hard Drives need a complete back up not just save files. So the image can be restored on any hard drive that restores the computer to its original state before it was imaged.
View 14 Replies View RelatedI have never used rsync before, only DD. But from what I have been reading, rsync is better becasue it will basically mirror your hard drive, thus being able to run the cloned software from the new hard drive. My problem is I do not know what is the best commands or even the basic commands to use in rsync. I am trying to make an image from a external hard drive to a usb drive. That way my chances of messing up he original software is not as risky becasue I'll just restore the image onto another hard drive. Does anyone know the best script to have rsync make an image file of a hard drive and place it on a usb drive and then restore it?
View 8 Replies View RelatedI have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
I have been running Ubuntu as my sole OS for about a month now, and aside from Computer Janitor, I have found no drive/fs cleaning tools, or defragging tools. I know this isn't Windoze, but surely there must be a way of maintaining your hard disk. I mean installs/uninstalls must leave detritus, and file moving must cause SOME fragmentation. Are there any apps, systems or methods in place that provide this functionality?
View 3 Replies View RelatedHow can a directory mount the hard drive? How can a list of files sitting on a hard drive that is not in RAM run your computer and then mount the physical device that stores the code that it is running? Obviously the CPU can access the hard drive before this so how does this massive abstraction make physical sense?I'm thinking that if this is abstracted to this extent so is the "/.../.../" path nomenclature as well. Is this just to change directories and or an environmental variable? Is the file really farther the more slashes that are in it?
View 14 Replies View RelatedI am trying to create an empty file based on the remaining hard disk space. The problem is that when I create a file that is 1 GB large, the df command shows the remaining space to be only 12 kb smaller than it was before the file was created.
someone@here:/tmp/delete# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 36827144 5031592 29924788 15% /
[code]....
I am trying to create hard links within a file system to a directory, but unable to do that. is there any limitation to create hard links to directories within file system ?
View 4 Replies View RelatedI'm going to be getting myself a TB drive for general purpose storage later on this month/beginning of April and I'm looking for opinions on what file system to use on the drive. Currently I have a couple of large drives, from ~250 - ~500 gig, formatted as ext3 but once in a while I have to wait for ages for a fsck to run. I know I can disable it if I want, or use another file system but just don't...
I've read that ext4 is hugely improved over ext3 in a number of ways, the time taken to do these scans included. But saying that I've also read, can't remember the source, that the one "huge" problem with Linux is the way it deals with large partitions, i.e the time taken to scan the drive for errors.So in a round-about way, what options do I have for a reliable, fast file system for large drives? I know there's plenty of documentation on the net about this, and I'm reading those, but I want some "real-life" opinions.Is ext4 stable enough to use now? What about JFS/XFS/ReiserFS etc?
I've just formatted by usb drive to vfat, as I heard that is best to use in both Linux and Windows? What do you think?
View 2 Replies View Related