i made a site www.##.comi want to put a program file in that and run it from my computer to create another file, not create file in my computer then send to the host.
View 7 RepliesI am looking for an application that will read the file names in a folder and generate a comma delimited file. I want then to import the comma delimited file contests to a spread sheet such as open office.I hava a number of PDF files generated from a scanner, each file with its own scaner generated file name. I want to put these into a data base so I can add the title and other reference information to provide a data base.
View 7 Replies View RelatedI am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
Where can I find a complete list of all the logs in the system?
I would like to know the following:
Which were the last connections to my machine (IP addresses) What were the files accessed by that IP address
I am using CentOS (don't remember the exact version it's probably 5.6 or 6.0).
I've got a Debian Squeeze computer on which the graphics have packed up, but the terminal in single user mode work perfectly fine.
There are a few files on this Debian computer that I want to transfer off, to a networked computer, but I have no idea how to do this.
The destination computer is a freshly re-setup Mandriva install, without (as yet) samba. I don't think it's necessary though. The Mandriva install works fine, has graphics, etc, but can't see the Debian Squeeze computer on the network, possibly because it's in single user mode, thus prompting the problem of how to transfer the files, using only a command line.
I am trying to copy four files from my machine, through a second machine, and finally to the destination. The destination computer can only be reached through the second computer, and I am curious to know if there is an easy way to do this. I am able to ssh to the middle machine and then ssh from there to the destination. I know that I could just copy from the first machine to the second, and then from there to the third. I guess that I'm curious to know what kind of command I can run to do this all at once or even if I could do such a thing (which I'm betting I can). I need to copy these files as root on the destination machine too.
View 6 Replies View Relatedi have generated .exe file from C file (ie filename.c ) after compiling in linux machine with -O option. I wish to know about how to run that .exe file when linux system starts up ?
View 3 Replies View RelatedI have deleted menu.lst file by mistake.
Now i am afraid to restart my computer as i think This will not get the link for boot the system.
Please let me know how can i restart my computer after shut down.
Will it be a problem in starting of the system.
Problem in adobe reader. Computer is hanging when opening .pdf file.
I recently installed adobe reader 9.4.2 on my computer. Im using mandriva. Do anyone knows how to reconfigure adobe reader?
I have two computers in my home running ferora . I want to copy a file from my 2nd computer to my local computer. Local PC:- 192.168.1.10
Remote PC:- 192.168.1.20
[root@localhost root]#scp 192.168.1.20:/home file1.txt
root@192.168.1.20s password:
scp: /home not a regular file
[root@localhost root]
I want to convert fdf file to xsf file or xyz file on ubuntu 9.10_32 bit .
View 5 Replies View Relatedi am using red hat linux 5.0 when i start my computer it shows me the message ofINIT:No inittab file foundEnter run level:i dont what to enter here if anybody know then
View 7 Replies View Relatedhow will i creat graphics program in linux...fedora-13.
View 5 Replies View RelatedI am having some difficulty with a USB Flash and have somehow created a permanent icon in this folder that matches the origial mount name. The shape of the icon is the same as a CD ROM. I need the permission of "unknown" to delete it. How do I get rid of this folder? I'm Using Gnome with Nautilus.
View 5 Replies View RelatedIf I open hard drake the player is listed as a USB device. I have been advised to drag files in to the USB storage device but am clueless to where to drag them to.
View 1 Replies View RelatedI work for a company that makes portable devices running Linux and I was recently asked to make the underlying file system read-only for "security" purposes. Since the distribution is based on LinuxFromScratch, I know that very little writing happens at run time. So, even if the device runs on a usb flash device, I doubt that putting the root file system RO will be that beneficial. I am actually more concerned about a process actually breaking because it cannot open a file in RW mode than a process going rogue and filling the root file system with log files, etc. I'd really like to ear what kind of advantages disadvantages there really is with read-only file-systems.
View 6 Replies View RelatedCan't log into my XFCE desktop like I normaly do. all the sudden I get notified that my xsession lasted less then 10 secondsLooking at the error I can see this:
Unable to access file /home/username/.iceauthority: No such file or directory
Using failsafe I can start a terminal. From terminal I tried to start X
Code: sudo startx Result: Running on desplay:0
So I tried to run this;
Code: sudo startxfce4 And I get up a graphical desktop.
So this is not a critical situation as I easily can use this method to log on, but as there has been something causing this I would like to be able to resolve this nonetheless. Btw it is not the old chmod trick in play here, cause my .iceauthority file is gone alltogheter.
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
I have just been bothered by a fairly small issue for some time now. I am trying to search (using find -name) for some .jpg files recursively. This is a Redhat environment with bash.
I get this job done though I need to copy ALL of them and put them in a separate folder BUT I also need to keep the order intact after copying.
For e.g - If I get a JPG file under /home/usr/new/1/ then the destination also needs to be /test/old/new/1/.
At the moment, I am simply putting all files under /test/old/ and I can't somehow get the later /new/1/ folder path created under /test/old/
I understand this could well be done using while OR if else loop, though if someone can just guide me with a hint, I would be really grateful.
I will complete the rest of the steps and was asking here since I am still not comfortable with the shell/bash scripts yet and planning to be really good at it over the next couple of months.
I need to get the modified date on a file in linux to use in a script.I tried using 'ls -l' on the file, but this caused problems when the date turned from a single digit into a double. The reason for the problem was because I was parsing the result string on spaces.How can I get the date of the last time a file was modified so I can use it in a script? For example, if a file was modified on 1/11/2010, I need the 11.
View 2 Replies View RelatedHow can I check and set who can view or open a given folder or file?
View 1 Replies View RelatedI am using xubuntu and there are a few types of files on website that instead of downloading and saving and then opening with emacs, I would rather when the radio button choice comes up say open with emacs. I am using xubuntu with xfce, and there is no line for a command to be entered as some ubuntu editions have. In the choice of changing the opening program from mousepad to something else, it says search and allows to navigate to find a program, but I cant find emacs anywhere not in etc/ or elsewhere. So where is its executable to direct the program chooser to?
View 1 Replies View RelatedI have a Linux (Kubuntu) system with a large (~20Gb) file which I would like to mess with. Specifically, I want to copy the entire contents of another large file (~12Gb) to the middle of this file, and keep the bits of the file which are not overwritten.This is what I want to happen, with the text between the pipes representing file contents:Before:
outfile: |abcdefghijklmnopqrstuvwxyz|
infile: |123456789|
After:
[code]....
How can I read .gz file direct on shell/terminal without decompressing the file?
satimis
I had a situation in which the the path of the file to be copied is written in other file and I had to copy it using shell script..I can use cp $(cat /home/robert/location.txt) /media/sda1 on normal linux shell...But I am using buildroot script where $(cat /home/robert/location.txt) evaluate to nothing..is just blank..
View 1 Replies View RelatedI'm trying to install PCSX2 (PS2 emulator) and I get the following error: ./pcsx2: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
I've followed the instructions here http://pcsx2.net/downloads.php and believe I have all the dependencies installed. My system has the following file:
/usr/lib/libgtk-x11-2.0.so.0
I need a shell script that will add the users name and date to a file when the user has modified the file, these files are within a group and only accessible to this group. But we need a way for people in the group to know who and when the file was last modified.
View 1 Replies View RelatedI was doing a tutorial on scripting in bash. I saved my file on the desktop and I cannot seem to get to that file to execute it. Here is what I have been using:
I try cd Desktop says that there is no such directory.
I tried /home/me/Desktop same thing.
i am trying to convert a binary file in to ASCII using shell script. this file contains multiple types of data like string, number, bcd, etc.
View 5 Replies View RelatedMany folders within a subdirectory some of which have lots of data in and some of which have only one specific file called produkt.fil inside.I need a command to find and delete those folders that contain ONLY the file produkt.fil - if other files exist (doesnt matter what they are) then they should be left alone. Note: produkt.fil exists in all of the folders always.
View 5 Replies View Related