It is possible to port the (only) libthread.so from the glibc 2.xx (with mipsel cross-compiler) or do I carry the whole glibc. I need the nptl library on my mips(el) target
View 1 Replies
OS : Oracle Enter Prise Linux 6 (equivalent to RedHat)
I am in process to install oracle 10g on said OS.My process fails and after digging up , I came to know that some of the oracle libraries are compiled on 32-bit architecture and it require glibc-32 bit . also it require for gcc-32 bit.
Now i have downloaded all the required rpm for gcc-32bit . when I try to install glibc and its dependencies , it gives me error that newer version already exist.
How can I install , Gcc-32bit(libgc, libstd-i386 etc) in parallel or standalone?
I've been working to get gcc up and running on a new install of Fedora 13. glibc-devel had dependencies upon installation where it required glibc and glibc-common, both 2.12.1-3. No problem, found both at rpm dot pbone dot net. However, when I try to install the following circular dependency results... it doesn't matter the order of install.
Code:
[root AT localhost gcc_install]# rpm -ivh glibc-common-2.12.1-3.x86_64 .rpm
error: Failed dependencies:
glibc = 2.12.1-3 is needed by glibc-common-2.12.1-3.x86_64
[code]....
I notice that these two packages contain the same files and uninstalling glibc-i18n doesn't uninstall the internationalization files, because they are also in the glibc package. Is this a mistake or is this normal or is there a reason for it ? I just made my own glibc package to fix this, but was wondering why this is the way it is...
View 7 Replies View RelatedI have installed Zimbra 6.0.1 and updated to Zimbra 7.1.0, the problem is that it needs the glibc-2.10 to start one of its services. I tried everything but i'dont get to update the glibc.
View 1 Replies View RelatedI made an update of my Centos 5.5 yesterday. In doing so glibc has been updated to glibc.i686. Just now some of my FPGA tools crash. Unfortunately there isn't a downgrade for glibc.i686. How can I replace glibc.i686 by glibc.i386?A simple yum install glibc.i386 conflicts with the files from package glibc-2.5-65.i686
yum list glibc
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
[code]....
I am in very much need to resolve the issue of Upgrade redhat5 from glibc 2.5 to glibc 2.7. The problem is when I run a binary compiled on our build setup (glibc 2.11) on Suse 11 (glibc 2.9) it works fine...
But the same binary do not work on redhat enterprise version 5 telling error as need glibc2.7 or sometimes segmentation fault for the same binary execution.
I tried upgrading the redhat glibc 2.5 to glibc 2.7, but not successful.
I am using CENTOS 5.3, I want to upgrade glibc 2.5 to glibc 2.7.
how to do it.
I am not getting from where to start
Yesterday, I think I did something stupid: I removed kernel-headers, gcc, glibc-devel and glibc-headers. My box is a CentOS 5.4 webserver (it has loads of packages installed, but that was done through Virtualmin config, so it's quite coherent all in all). The thing is that now I need to reinstall at least the headers and glibc, but hey! this is what I get :
[Code]...
I'm trying to build the glibc-2.3.6 (with debug symbols) for a powerpc system. I need to compile this libraries with gcc 4.1.1 and binutils 2.16.1.
All my tentatives fails and I don't know how to start with the process of building.
I need to compile glibc.
What is this error ?
Code:
Hi I am getting this error::
*** glibc detected *** ./a.out: free(): invalid next size (fast): 0x084ed538 ***
======= Backtrace: =========
/lib/libc.so.6[0x4df851]
[code]....
Now i am installing glibc-2.3.5
The problem is:
In a chroot einvironment i am trying to compile gcc but is says that i need a newer version of glibc, but i have the newest version of it. i think somehow it trys to use the older glibc from the ubuntu install im makeing it on.
View 1 Replies View RelatedError message: GLIBC_2.0 not defined in file libc.so.6 with link time reference. What can I do?
View 1 Replies View RelatedI am a non-root user on my Lab computer with RHEL4 OS and am trying to install Glibc-2.11.1 on it .. for proper installation I used a directory other than the source directory of Glibc and ran configure which was fine, then I ran make which also ran fine.. but when I ran "make install" an error came up which was :
make subdir=nscd -C nscd ..=../ subdir_install
make[2]: Entering directory `/data/sandy/Desktop/Gotten/glibc-2.11.1/nscd'
gcc -pie -Wl,-O1 -nostdlib -nostartfiles -o /data/sandy/Desktop/Gotten/glibc-build/nscd/nscd -Wl,-dynamic-linker=/data/sandy/program2/glibc/lib/ld-
[Code].....
so I guess I don't need to specify the configparms .. but anyway I did it as earlier I wasn't sure what would solve my problem with NSCD.. Then I moved to make and all went fine, but the same error popped up during "make install"
install the Glibc package being a non-root user?
Suppose you have glibc 2.5 compiled with kernel headers 2.6.18. Is it safe to run this glibc with Linux kernel 2.6.32? Is it safe to run this glibc with Linux kernel 2.6.9?
View 1 Replies View RelatedI've been looking further into Linux from Scratch, and I am particularly interested in the package management side of the system. I understand that this is not covered in the book, but if I were to attempt LFS, package management would be a major convenience. From what I have read, when upgrading packages like glibc, you have to recompile everything to reflect the change.
If that is true, how do package managers like pacman and apt get around this issue? Isn't lacking glibc for even the time it takes to replace the files catastrophic to the system?
I want to install the media-player vlc 1.0.6 on my system.My Linux version is Linpus. The package's name ended with tar.bz2 so I tried to install it from source. I don't know how to update the glibc run.time and I don't understand the alternative suggestion. What should I do?
View 3 Replies View RelatedCode: [root@test ank]# uname -a
Linux test.testbox.com 2.6.9-67.0.0.0.1.ELhugemem #1 SMP Sun Nov 18 00:31:12 EST 2007 i686 i686 i386 GNU/Linux I am unable to install glibc-2.3.4-2.41.i386.rpm
ode: [root@test ank]# rpm -Uvh glibc-2.3.4-2.41.i386.rpm
warning: glibc-2.3.4-2.41.i386.rpm: V3 DSA signature: NOKEY, key ID b38a8516
error: Failed dependencies:
glibc-common = 2.3.4-2.41 is needed by glibc-2.3.4-2.41.i386
glibc = 2.3.4-2.39 is needed by (installed) glibc-headers-2.3.4-2.39.i386
glibc = 2.3.4-2.39 is needed by (installed) glibc-devel-2.3.4-2.39.i386
glibc = 2.3.4-2.39 is needed by (installed) glibc-utils-2.3.4-2.39.i386
I have the tar file of glibc-2.12.1, but now I want to edit the SPEC file. I can't find it. For those that want a "why", I'm trying to make it smaller. So simply, where is the SPEC file for glibc? (rpmbuild cannot find it in the *.tar.gz file).
View 4 Replies View RelatedI have a NAS (dlink-320) with a fully working fun_plug (http://wiki.dns323.info/) Linux system.However when I try to install x263 the configuration scripts says it need the math function log2f()But because fun_plug uses uClib instead of glibc and uClib have not yet implemented log2f() function I am trying to compile the glibc instead. I am only interested in the math part of glibc but have not found any documentation to just compile this part so it seems that I have to compile "most" of it. have gli
I have copied glibc-ports-2.9/sysdeps/arm to glibc-2.11.2/sysdeps.and I enter
Code:
../configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --enable-shared --build=arm-linux
but get the following error message
[code]....
AFAIK, in addition to implementing the standard C library, glibc provides wrappers for system calls, threading support, and basic application facilities. So because of that, glibc that will be used on my target system should be built based on the kernel version running on my target, right?
Based on the above, I am trying to build a glibc version for my target machine's kernel. However, I don't know to to build a glibc library for a target system and also where on the target's filesystem should be put? In which location Linux will start looking for the libraries required for a program to run (should I create an /etc/ld.so.conf file)?
VERY new to linux, erm but I have an issue that needs solving!I recently moved to university, where their network blocks sftp port 22, this means that I cannot connect to my FTP server which is running a version of linux.Now I've got this ftp server connected to a seedbox and it was created using the following walk through..Code:I have written this guide for a friend, but I though it would be useful for others as well.
There are several guides floating around, but I found that most always cock up in some way. This one is tried and tested to work on Debian Etch (on an OVH rps, but should apply to most servers).If there is a new stable release of rtorrent/libtorrent then I will update this guide to show you how to update it (without reinstalling the whole server).
At the bottom there are also instructions to install ftp access & some network monitoring software.Basically, I would really like someone to be able to construct the commands on how to change the listen port for sftp connection on linux or add another port to the list that Linux would use so that I could put in through putty.
I tried to make "ssh tunneling", but failed and got this message.
Quote:
Administrator@windstory-PC /
$ ssh -R 7869:localhost:7869 windowsstudy@192.168.0.4
windowsstudy@192.168.0.4's password:
Warning: remote port forwarding failed for listen port 7869 Last login: Wed Jul 21 01:56:04 2010 from 192.168.0.2 -bash-3.2$
1. system environment
192.168.0.2 - windows 7 + copssh
192.168.0.4 - centos 5.4 x86 + openssh
2. Guide for setting "ssh tunneling"
[URL]
3. Added this to sshd.conf
Quote:
AllowTcpForwarding yes
4. "netstat -na|grep 7869" at 192.168.0.4
Quote:
[root:maestro:~]# netstat -na|grep 7869
tcp 0 0 0.0.0.0:7869 0.0.0.0:* LISTEN
tcp 0 0 127.0.0.1:7869 127.0.0.1:53539 ESTABLISHED
[code]....
5. result of "ssh -vvv -R 7869:localhost:7869 windowsstudy@192.168.0.4"
Quote:
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
[code]....
6. I added 7869 for telnet service as follow;
Quote:
mytelnet 7869/tcp # My Telnet server
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
I have a mail server i need it to send message via port 587 not port 25, i make some changes to my postfix server which i use and it is already successed making a telnet to 587 port like it :
[Code]....
I am trying to install iptux from source because i need to change the default port else it won't work.while configuring i get this error :
configure: error: Package requirements (glib-2.0 >= 2.16.0) were not met:
No package 'glib-2.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
[code]....
Im using a VPS server and im running Debian 64bit.im trying to install latest glibc.How could i do this?if i understand it correctly this is a part of libc.I have an old version of glibc from libc6 but i cant seem to get the latest glibc and i need 2.4 or above.
View 9 Replies View RelatedI want to install glibc-utils on debain . but I can't find it by apt-get .my friend can install it on redhat. how to install glibc-utils on debian.
View 8 Replies View Related
