I would like to add a new user with useradd (on Debian 4.0), I get the message Segmentation fault. I made a strace, that says: access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) I have read maybe the libc6 is missing or damaged, so I installed it again (apt-get install libc6, install was successfull), but the problem is still there. I touched it (touch /etc/ld.so.nohwcap)
View 7 RepliesVLC was behaving weirdly recently and when I've tried to run it with primusrun command (since I have optimus card) it gave me a segmentation fault
Code: Select allVLC media player 2.2.1 Terry Pratchett (Weatherwax) (revision 2.2.1-0-ga425c42)
Segmentation fault
I've read on google that issue has been solved by a few people from updating the microcode, but I don't even understand what microcode is, I'm also not sure whether I should install amd64 or intel package for it?
Here is my lscpu
Code: Select all$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
[Code] ....
I'm running debian 8, no problems, after I recently upgraded some packages, skype did not open, I used terminal to open it and it gave an output saying
Code: Select allSegmantation fault
Then i opened it as super user and it gave this output
Code: Select all(process:1500): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Segmentation fault
I noticed weird behavior with some of the installed applications. It all started with Guake when I wanted to use it. My shortcut key is F4, I hit F4 and nothing showed up. So I run Guake in terminal, everything fine. Then I hit F4 key and after few seconds Guake crashes with message "Segmentation fault". Nothing more, just that. Then I noticed that Audacity does the same, Gdebi too and even Reportbug app does that (I'm not sure about "segmentation fault", but the app crashes). I don't remember doing anything special or installing any app. All I can think of is this message when booting the system
Code: Select allsystemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
No idea, if there is any connection. Is there anyway, how I can maybe see more behind that "Segmentation fault" error? I found history.log in /var/log/apt/, so I'm thinking about looking into it and see if I really did not installed anything. I have a little feeling that it might have started after some update, but I'm not sure about that..
Synaptic does not run. When I start it from Menu/system/administration/synaptic package manager , it asks for root password, then crashes. Nor does aptitude from the root terminal.localhost:/home/user# aptitude
View 14 Replies View RelatedRunning programs in X (WindowMaker) as another user.
Until recently (Debian Stretch) I was able to run graphical programs in X as a second user, like so:
- log into X as user1
- run "xhost+"
- run "su - user2"
- run any graphical program (gthumb, konquerer, ...) as user2
Now when I try to run a program as user2, I get
Code: Select all user2@localhost:~$ gthumb
error: XDG_RUNTIME_DIR not set in the environment.
Segmentation fault
XDG_RUNTIME_DIR for user1 points to /run/user/1000 which I believe gets created by pam_systemd when logging into X. However, doing "su - user2" does not create /run/user/1001. Why not? And how do I get on-the-fly user switching working again?
Related to this, /run/user/1001 not being created on user switch has always caused me some grief b/c audio would not work for user2. But I could work around that by piping pulse through a socket. But now graphics are also broken and that I can't seem to work around.
I have discovered that epiphany cannot be launched. When I try, either from the gnome desktop or from a terminal, I get a box which reports that epiphany has terminated unexpectedly, and would I like to recover the last session. If I click on either from the desktop, nothing happens. Doing it from a terminal, I get the following:
View 7 Replies View RelatedA few days ago I bought a Raspberry PI B with Debian Wheezy (7.0 - I think) on it. Before installing a media centre on it I wanted to do some basic configuration/upgrade and decided to upgrade to Debian Jessie. I followed the instructions provided on [URL] .....
Before moving to Jessie I have upgraded the original Wheezy; after the upgrade the version was 7.8. Everything went well till I executed "apt-get dist-upgrade". Errors where generated. As suggested I tried the "apt-get -f install"; but it did not go smoothly either. However, so far, I am accessing the desktop and everything seems fine (although I did not do anything fancy yet). The version recorded is 8.0. Thus, should I worry about the error messages generated?
Please find the log file here: [URL] ......
Note that I put the log file on Google Drive because each time I clicked on "add file" in the "Upload Attachment" tab when editing this message I got:
Internal Server Error:
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, forum-admin@forums.debian.net and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
I added my linux server to a windows AD using winbind / samba. Everything worked just fine. After changing the OS to Debian lenny x64 I get a "segmentation fault" when trying to change user passwords. I am using the exact same configuration, on my 32 bit Server everything works.
debian:~# passwd <user>
sgmentation fault
tail /var/log/syslog:
kernel: [689689.005934] passwd[11209]: segfault at 0 ip b7b84418 sp bfc37fc0 error 4 in pam_winbind.so[b7b7e000+b000]
Debian Lenny 5.0
[Code].....
I had Skype debian_2.2.0.35-1_amd64 on my Debian 2.6.32-5 amd64 and it was working without any problem. After re-installing my gnome desktop environment, my skype stopped working. I tried to re-install it. I found out it re-installs without any error but it doesn't launch and gives me "segmentation fault" error on terminal. I purged skype, deleted the .skype folder and installed it again with no luck. when I try to re-install skype via software center it says: "Sorry, 'skype' is not available for this type of computer (amd64)." what should I do to have the skype working on my system again?
View 9 Replies View RelatedI created a new user with command useradd (as root) :
Code: Select alluseradd razer123
And then set a password with command passwd (as root):
Code: Select allpasswd razer123
No Error!
When I logged out and tried to login with new user, I coulden't! (even after restart!)
I looked into /etc/passwd :
Code: Select allcat /etc/passwd | grep razer123
result:
Code: Select allrazer123:x:1002:1002::/home/razer123:/bin/bash
There is no home folder in the path!
# I have debian 8 and MATE desktop.
What different between Segmentation fault and aborted
When I read about dbg I make different reason from the tutorial ....with the same code
Example in tutorial the gdb Display a message like this
Code:
And in my computer I have
Code:
I want to know what the different between them
I have a problem with a directory which contains my music collection. It can't be opened; all other directories work fine. I can cd into my ~/Music directory, but ls gives segfault and KDE programs hang when trying to open this directory. The problem probably has appeared after the rename of subdirectory under the Windows (don't remember particular ext3 driver; can check tomorrow).fsck says that the partition is fine. The whole disk is mounted on the single partition. Windows is located on another physical disk.Is there any way to recover my directory?
View 4 Replies View RelatedI have been trying for like 2wks to figure out why I keep getting seg faults in Viper WM from slackbuilds.I have it on 6 diff versions of slack, 12.2-current and also in debian and arch.In all of them VWM crashes with seg fault?!I really like it alot and need to figure out what the issue is?
View 2 Replies View RelatedI am using RHEL, and trying to execute a c program.I'm able to compile properly and execute until i reach a function getHandle, where the program gives a segmentation fault. Segmentation fault occurs in getHandle().
Here is the code:
My system is running with powerpc and linux, i am facing some kernel crash problem.
I have pasted the trace and log
(1) Display the backtrace for the thread that crashed.
(2) Display argument parameters and local variables for the thread.
I got segmentation fault error when I execute "procinfo -a" but not a problem when I just execute procinfo.
View 3 Replies View RelatedI have a strange problem. I have two Linux boxes. They are connected via a LAN. From machine 1 (Fedora Core 8) I can ssh to machine 2 (Fedora Core 3)without any problems if I am logged in as root on machine 1. If I am logged in as any other non-privileged user and attempt to ssh to machine 2, I get a segmentation fault and the connection is dropped (after ssh asks for the password).
Everything was working up until last Friday (8/6/2010). I did upgrade the machine 1 from 512Kb to 2.0Gb memory then..
machine1_root#ssh anyaccount@machine2 <-This works
machine1_anyotheraccount$ssh anyaccount@machine2 <-segmentation fault
mount -t aufs -o dirs=$CHANGES=rw:/initrd/loopfs=ro none /unionCould anyone tell me what this command is trying to do..And, what could be the possible reason for it resulting in a segmentation fault
View 2 Replies View RelatedThe following code is giving segmentation fault.
View 8 Replies View RelatedIam currently messing about with a Raq4 server and getting the above response,
I have post the log below.
I am getting this message: internal compiler error: Segmentation fault
Please submit a full bug report,
with preprocessed source if appropriate. for every compilation that takes longer (ie: linux kernel, kde sources etc.)
I've tried other OS (at that moment I was on Fedora 12, now on Debian; was a Suse also) and it didn't work. I've tried replacing my hard disk, since it needed an upgrade either ways - that didn't work either. I assumed that it's the RAM fault - tested them with memtest and it says they are fine. Does anyone know what else I can do in order to figure out where the problem is?
I have a post on [URL].. with "how to configure mutt mail client for mail server other that gmail" subject and it has no good result and at the end the person who answered me said it may be a mutt bug that I had to report it ,but I thing mutt is old enough to not to has this such a big bug. My problem is when I configure mutt with gmail it works fine but when I configure it with mine it returne segmentation fault error.and don not want to use other mail client in place of mutt. why mutt mail client get such this error with my configuration?
View 3 Replies View RelatedWhen I try to design a small filesystem, it always have the Segmentation fault.#: make makefile
Format will erase all context on the disk. Are You Sure? y
Program received signal SIGSEGV, Segmentation fault.
The question is,I cann't find the fseek.c anywhere,so I cann't solve the problem,can you help me?thanks very much.I think I should try my best to find the error in the code,code is too long,so the question i describe is not in detail.
My centos linux mailserver has crushed and does not allow any login form any user including root. I have managed to start it in single user mode but using vi editor, df command gives segmentation fault. I suspect the /var/* is full but I can neither remove any file/folder/mail/logs nor copy these to make a backup.Attempt to do this as single user/root is met with readonly files yet I have given full permissions to the files and the folders.
View 5 Replies View RelatedI am testing PCLinux 2009.1 prior to installing. My desktop currently runs on ME and has been out of use for some time. It still works however and I can still get online. I'm currently using a laptop running XP. I would like to make use of my old desktop and tried to test PCLinux 2009.1 today. I followed the instructions obtained online and booted from the Linux cd. The pc booted up ok and displayed the first screen allowing me to select the "Live CD" option. After enter my system hung up at "Probing SCSI Devices:Segmentation fault".
View 2 Replies View RelatedI am trying to learn shell scripting from a book and all I am doing is following few instruction from the book. Now this is what I am doing. I am trying to add a user using the useradd command so I run the following at command prompt root@S8500C_9>useradd ajit. The first time when I add this user I was successful.Later I deleted this suer using the userdel -r ajit command.Now when again I am trying to add this user it gives me following error. useradd: group ajit exists - if you want to add this user to that group, use -g. Now when I try using the -g option with the useradd command it gives we all the set off options avaiable to use along with the useradd command but doesnt create the ajit use
View 5 Replies View RelatedI installed Centos 5, httpd 2.2.3 and php5.3.6 with yum.
We have a website which can upload JPEG file to the server via php. But when we uploaded file, it showed the error
Quote:
child pid 13810 exit signal Segmentation fault (11)
I tried to run gdb on my computer and it showed that
Quote:
0xb6d1a600 in ?? () from /usr/lib/libjpeg.so.62
I am using a ubuntu 10.10 desktop,i cannot login to my system it doesnt accept the password. when i login in safe mode i get through but when i run any command i get segmentation fault.
View 5 Replies View Relatedwhen I try to add a user it fails to make the corresponding home directory. I can still su to the user, set the password, and everything else. the output is as follows:
$ useradd username
useradd: cannot create home directory /home/username
I read that this could be a result of there not being enough space but if I do df -h, i see that only 88% of the memory is being used.