I am using RHEL, and trying to execute a c program.I'm able to compile properly and execute until i reach a function getHandle, where the program gives a segmentation fault. Segmentation fault occurs in getHandle().
Here is the code:
i wrote a program to fill an array with 100 random numbers ranging from 1 - 200. i compiled the program using gcc. the program successfully compiled but when i try to run it i get a segmentation fault. here is the code. i put *** on the line that gdb indicated was the problem.
#include <stdio.h>
#include<stdlib.h>
#include<time.h>
[code]....
I am making a program to do a breadth first search.The code which I am posting here just makes a que of the nodes visited in a binary tree in inorder fashion,so this implementation is not yet complete.While developing I got a segmentation fault which I was not able to understand why I am getting so I am posting since the tree of same program (without BFS) is working.
Code:
#include<stdio.h>
#include<stdlib.h>
[code]...
My program is to find the values of variables using matrices and in matrices using GAUSS ELIMINATION method. It gives segmentation fault then I input the values of coefficients of the variables.
#include<stdio.h>
void main()
{
int n;
int i,j,l;
float m;
[Code]...
Having upgraded Debian Linux i386 squeeze release from kernel 2.6.30 to 2.6.32 everything works except X-server segmentation fault on launching a graphic program (CHIMERA, [URL]... I have successfully recompiled CHIMERA on the updated Linux, to no avail.
Below - between *** - the final part of "Xorg.0.log" reporting troubles. Before that, the log is identical to when X-server is working properly (reported in full between ).
[Code]...
I am using Ubuntu 9.04 linux 2.6.28-11-generic. When I write a program that gives the "Segmentation fault" error, or when I send this signal (SIGSEGV) to a program, the "Segmentation fault" is shown and no core dumped. When I look for "core" file in the current directory, I can't find it, too.
View 2 Replies View RelatedSo I've wanting to try out the new development branch of compiz (0.9). I made some slackbuilds a while back and installed all of the necessary packages for the compiz window manager. However when ever I tried to launch the program using "compiz --replace ccp &" I would get a segmentation fault. I forgot about it but today I decided to give it another go and after a few hours I decided to try and see what would happen if I just built compiz-core from source with out using a slackbuild, and sure enough it now works. I have hacked the script trying different combinations to try and make it work but no matter what I try unless I install from scratch (directly into the tree) it will not work. If anyone has any ideas on how to fix this so I can make an actual slack package please let me know. Also I used the main developers forum post as a referencem you can view his instructions here [URL]..
View 1 Replies View RelatedI'm debugging some C++ code, but as I know very little about it, I can't find the problem.Here the debugging output:
Quote:
rihab@rihab-laptop:~/ns-test$ gdb ns
(gdb) run /home/rihab/ns-allinone-2.34/ns-2.34/OWNS/demos/owns_demo.tcl[code].....
I'm very excited to post a question, since I always do everything by myself. I'm reading several lines from a text file using istream::getline(char *, streamsize n). I get the file name from the command line. Here is the code:
Code:
#include <iostream>
#include <fstream>
using namespace std;
int main ( int argc, char *argv[])
[Code]...
Using GCC 4.4.5 on Ubuntu 32bit Btw: I know assembly language and know what a segmentation fault is
I'm trying to run my program that distributes grades and puts it in a table. The code compiles but when I run it I get a Segmentation Fault. I'm still new to arrays, but I think the issue is where I'm trying to make the table. Here is my code:
Code:
#include <stdio.h>
#include "constant.h"
int readValues(int[]);
int findMedian(int[], int);
[code]....
What different between Segmentation fault and aborted
When I read about dbg I make different reason from the tutorial ....with the same code
Example in tutorial the gdb Display a message like this
Code:
And in my computer I have
Code:
I want to know what the different between them
I have a problem with a directory which contains my music collection. It can't be opened; all other directories work fine. I can cd into my ~/Music directory, but ls gives segfault and KDE programs hang when trying to open this directory. The problem probably has appeared after the rename of subdirectory under the Windows (don't remember particular ext3 driver; can check tomorrow).fsck says that the partition is fine. The whole disk is mounted on the single partition. Windows is located on another physical disk.Is there any way to recover my directory?
View 4 Replies View RelatedI have been trying for like 2wks to figure out why I keep getting seg faults in Viper WM from slackbuilds.I have it on 6 diff versions of slack, 12.2-current and also in debian and arch.In all of them VWM crashes with seg fault?!I really like it alot and need to figure out what the issue is?
View 2 Replies View RelatedMy system is running with powerpc and linux, i am facing some kernel crash problem.
I have pasted the trace and log
(1) Display the backtrace for the thread that crashed.
(2) Display argument parameters and local variables for the thread.
I got segmentation fault error when I execute "procinfo -a" but not a problem when I just execute procinfo.
View 3 Replies View RelatedI have a strange problem. I have two Linux boxes. They are connected via a LAN. From machine 1 (Fedora Core 8) I can ssh to machine 2 (Fedora Core 3)without any problems if I am logged in as root on machine 1. If I am logged in as any other non-privileged user and attempt to ssh to machine 2, I get a segmentation fault and the connection is dropped (after ssh asks for the password).
Everything was working up until last Friday (8/6/2010). I did upgrade the machine 1 from 512Kb to 2.0Gb memory then..
machine1_root#ssh anyaccount@machine2 <-This works
machine1_anyotheraccount$ssh anyaccount@machine2 <-segmentation fault
mount -t aufs -o dirs=$CHANGES=rw:/initrd/loopfs=ro none /unionCould anyone tell me what this command is trying to do..And, what could be the possible reason for it resulting in a segmentation fault
View 2 Replies View RelatedThe following code is giving segmentation fault.
View 8 Replies View RelatedIam currently messing about with a Raq4 server and getting the above response,
I have post the log below.
I am getting this message: internal compiler error: Segmentation fault
Please submit a full bug report,
with preprocessed source if appropriate. for every compilation that takes longer (ie: linux kernel, kde sources etc.)
I've tried other OS (at that moment I was on Fedora 12, now on Debian; was a Suse also) and it didn't work. I've tried replacing my hard disk, since it needed an upgrade either ways - that didn't work either. I assumed that it's the RAM fault - tested them with memtest and it says they are fine. Does anyone know what else I can do in order to figure out where the problem is?
I have a post on [URL].. with "how to configure mutt mail client for mail server other that gmail" subject and it has no good result and at the end the person who answered me said it may be a mutt bug that I had to report it ,but I thing mutt is old enough to not to has this such a big bug. My problem is when I configure mutt with gmail it works fine but when I configure it with mine it returne segmentation fault error.and don not want to use other mail client in place of mutt. why mutt mail client get such this error with my configuration?
View 3 Replies View RelatedI would like to add a new user with useradd (on Debian 4.0), I get the message Segmentation fault. I made a strace, that says: access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) I have read maybe the libc6 is missing or damaged, so I installed it again (apt-get install libc6, install was successfull), but the problem is still there. I touched it (touch /etc/ld.so.nohwcap)
View 7 Replies View RelatedWhen I try to design a small filesystem, it always have the Segmentation fault.#: make makefile
Format will erase all context on the disk. Are You Sure? y
Program received signal SIGSEGV, Segmentation fault.
The question is,I cann't find the fseek.c anywhere,so I cann't solve the problem,can you help me?thanks very much.I think I should try my best to find the error in the code,code is too long,so the question i describe is not in detail.
My centos linux mailserver has crushed and does not allow any login form any user including root. I have managed to start it in single user mode but using vi editor, df command gives segmentation fault. I suspect the /var/* is full but I can neither remove any file/folder/mail/logs nor copy these to make a backup.Attempt to do this as single user/root is met with readonly files yet I have given full permissions to the files and the folders.
View 5 Replies View RelatedI am testing PCLinux 2009.1 prior to installing. My desktop currently runs on ME and has been out of use for some time. It still works however and I can still get online. I'm currently using a laptop running XP. I would like to make use of my old desktop and tried to test PCLinux 2009.1 today. I followed the instructions obtained online and booted from the Linux cd. The pc booted up ok and displayed the first screen allowing me to select the "Live CD" option. After enter my system hung up at "Probing SCSI Devices:Segmentation fault".
View 2 Replies View RelatedI installed Centos 5, httpd 2.2.3 and php5.3.6 with yum.
We have a website which can upload JPEG file to the server via php. But when we uploaded file, it showed the error
Quote:
child pid 13810 exit signal Segmentation fault (11)
I tried to run gdb on my computer and it showed that
Quote:
0xb6d1a600 in ?? () from /usr/lib/libjpeg.so.62
I am using a ubuntu 10.10 desktop,i cannot login to my system it doesnt accept the password. when i login in safe mode i get through but when i run any command i get segmentation fault.
View 5 Replies View RelatedI using a linux kernel v2.6.26.something. Distribution: OpenSuse 10.3. While writing a c program on linux in KATE, i used character pointers to declare a string like, for ex: " char *temp " but compilation with gcc gives me the error," Segmentation Fault " what is segmentation Fault Why does it occur or what are the reasons behind it?
View 14 Replies View RelatedI did a Yum update last Friday. It was done before 5.6 was released so I still have 5.5 + various updates. Yum is now giving me a segmentation fault when I try to run it. I believe it has to do with an improperly synchronized version of sqlite which was updated and then Yum stopped working. I'm guessing that installing the latest Yum RPM will fix the dependency issues. Will this throw me out of sync with for instance updating to 5.6?
View 5 Replies View RelatedVLC was behaving weirdly recently and when I've tried to run it with primusrun command (since I have optimus card) it gave me a segmentation fault
Code: Select allVLC media player 2.2.1 Terry Pratchett (Weatherwax) (revision 2.2.1-0-ga425c42)
Segmentation fault
I've read on google that issue has been solved by a few people from updating the microcode, but I don't even understand what microcode is, I'm also not sure whether I should install amd64 or intel package for it?
Here is my lscpu
Code: Select all$ lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
[Code] ....