Software :: Ubuntu Server 10.10 - Segmentation Fault Error On Quota Activation
Jan 25, 2011
I'm running ubuntu server 10.10 64 bit.
1. Set quota in /etc/fstab like this:
/dev/sdb1 /var/www reiserfs defaults,usrquota 0 2
2. Checked quotas:
# quotacheck -cavm
quotacheck: Your kernel probably supports journaled quota but you are not using it. Consider switching to journaled quota to avoid running quotacheck after an unclean shutdown.
3. Tried to activate quotas using "quotaon -a" and got a segmentation fault error.
When I change filesystem to ext3 (using mkfs.ext3 and changing /etc/fstab) it works well. So there are 2 problems, quotacheck warning about journaled quota and the segmentation fault error.
I was in the process of installing something via apt-get. The laptop crashed halfway through, and now I cannot install anything new, do any updates/upgrades. I also cannot open Synaptic.When running apt-get in the terminal I get the following error:
When I compile my C program on SUSE, I receive a segmentation fault error. To my knowledge, this occurs when a program tries to recall memory but is not allowed to. So I'm using GDB for the first time to solve this problem. After a series of commands, I reach this point:
Code: #0 0x00002b13e1bab127 in getdelim () from /lib64/libc.so.6 #1 0x000000000040167b in main () at dmsp_cusp.c:158
Here's the offending code in dmsp_cusp.c: Code: 157 printf("enter the input file name:"); 158 getline(in_fname); 159 fp3 = fopen(in_fname, "r"); 160 if(fp3 == NULL) { 161 printf("can't open input file %s",in_fname); 162 exit(1); }
I am getting this message: internal compiler error: Segmentation fault
Please submit a full bug report, with preprocessed source if appropriate. for every compilation that takes longer (ie: linux kernel, kde sources etc.)
I've tried other OS (at that moment I was on Fedora 12, now on Debian; was a Suse also) and it didn't work. I've tried replacing my hard disk, since it needed an upgrade either ways - that didn't work either. I assumed that it's the RAM fault - tested them with memtest and it says they are fine. Does anyone know what else I can do in order to figure out where the problem is?
I am using Ubuntu 9.04 linux 2.6.28-11-generic. When I write a program that gives the "Segmentation fault" error, or when I send this signal (SIGSEGV) to a program, the "Segmentation fault" is shown and no core dumped. When I look for "core" file in the current directory, I can't find it, too.
I have a centos server running nagios for monitoring. I restarted the machine, it is actually a console server anyway. After getting to the login screen, I typed in my user name but it never propt for my password. I can't even ssh into the system. So I tried to use the installation cd and enter into rescue mode where I typed chroot and was able to enter into the root environment. I was able to configure a network interface in the rescue mode and can ping the machine at this point, though can ssh still. In the root environment, I tried running couple commands. like try to restart the sshd. When I typed /etc/init.d/sshd restart, I got an error saying:
766 segmentation fault.
when I vi any thing I get error:
segmentation fault.
how can I solve this problem? What is causes this. Even in the event of restarting the machine, I see so many fails with segmentation fault.
I am using RHEL 6. When i use CAP3 software for the first time it successfully resulted. But second time when i used, it's showing "segmentation fault (core dumped)". Even after restarting and reinstalling it showing same error. When i google, i found it some memmory related problem. But no clear information.
I am getting below information from the core file on our production servers. one of our server is crashing with segmentation fault .Program terminated with signal 11, Segmentation fault.
#0 0x00b24332 in _int_malloc () from /lib/libc.so.6 (gdb) where #0 0x00b24332 in _int_malloc () from /lib/libc.so.6
I had Skype debian_2.2.0.35-1_amd64 on my Debian 2.6.32-5 amd64 and it was working without any problem. After re-installing my gnome desktop environment, my skype stopped working. I tried to re-install it. I found out it re-installs without any error but it doesn't launch and gives me "segmentation fault" error on terminal. I purged skype, deleted the .skype folder and installed it again with no luck. when I try to re-install skype via software center it says: "Sorry, 'skype' is not available for this type of computer (amd64)." what should I do to have the skype working on my system again?
My centos linux mailserver has crushed and does not allow any login form any user including root. I have managed to start it in single user mode but using vi editor, df command gives segmentation fault. I suspect the /var/* is full but I can neither remove any file/folder/mail/logs nor copy these to make a backup.Attempt to do this as single user/root is met with readonly files yet I have given full permissions to the files and the folders.
Having upgraded Debian Linux i386 squeeze release from kernel 2.6.30 to 2.6.32 everything works except X-server segmentation fault on launching a graphic program (CHIMERA, [URL]... I have successfully recompiled CHIMERA on the updated Linux, to no avail.
Below - between *** - the final part of "Xorg.0.log" reporting troubles. Before that, the log is identical to when X-server is working properly (reported in full between ).
I am no longer able to run K3B. I get an error "Executable: k3b PID: 8469 Signal: 11 (Segmentation fault)". I tried uninstalling and reinstalling K3B but still the same. I googled the error message and have not come up with any results other than it seemed to be a bug with earlier versions of Linux than mine. One change I have made to my system is updating the kernel to 2.6.35-30 generic
I recently bought an HP OfficeJet 6500 AIO printer. Since the printer has ethernet connectivity, I have managed to setup the printer with the 32bit openSuSE 11.2, 11.3 machines I have in my network. However, the 64bit 11.1 is another beast. I cannot make the printer work. The default and updated from officials repos hplip does not contain the PPD file for the printer/scanner/fax.I added the "Printing" repository (Index of /repositories/Printing/openSUSE_11.1) and downloaded the 64bit versions of hplip, hplip-hpijs packages. Now, the issues:hp-setup does not run with "Segmentation fault" error! Although I can see the printer, setup and modify it's configuration, cups cannot print, not even a test page.The errors I have are:
Code: Unable to execute /usr/lib64/cups/filter/hpcups: No such file or directory
Regarding the 1st error, I "solved" it by using the hplip-qt3 package from KDE_3 repository. And when I used that version of hplip, (3.10.9-4.2, instead of the 3.10.9-31.1 of the Printing repository), I had no more filter related problems (foomatic etc).For the second one, it is obvious that the problem is related to the location of the 64bit filters.The /var/log/cups/error.log has the following lines:
Code: I [13/Jan/2011:20:50:52 +0200] [Job 60] Started filter /usr/lib64/cups/filter/pstops (PID 30039) I [13/Jan/2011:20:50:52 +0200] [Job 60] Started filter /usr/lib64/cups/filter/pstoraster (PID 30040) code....
On two Centos5 servers, yum gives a segmentation fault error when trying 'yum update' or 'yum check-update' after running 'yum clean' :
[Code]....
The error is the same for the other computer except while attempting to update the rpmforge repository. Nothing has really changed on the servers in some time and 'yum update' worked fine on each yesterday and I have no idea why they would both suddenly fail!
I have a red hat linux 8.0 server and I want to upgrade mysql 3.23.58 to 4.0, but my rpm command shows this error "segmentation fault" at the end of the rpm -Uvh mysql-server-version command, is there another way to upgrade it?
I just have installed Karmic Koala and have a problem running Firefox. I`ve seen that this is quite a common problem, but since I`m a newbie, I have no idea what to do. I have not found any solutions that would solve my problem yet. Every time I try to load a website including flash advertisings, Firefox just quits.
I just made a pretty simple program in geany (GCC with default options)and I ended up with Segmentation fault. program is pretty simple and it performs binary search on an array.I know what segfault is but here I m clue less about why it is happening.and one thing more, the program runs fine in turbo C++ compiler.Same thing happened earlier too when I was making a program which included some simple string manipulation
I using a linux kernel v2.6.26.something. Distribution: OpenSuse 10.3. While writing a c program on linux in KATE, i used character pointers to declare a string like, for ex: " char *temp " but compilation with gcc gives me the error," Segmentation Fault " what is segmentation Fault Why does it occur or what are the reasons behind it?
I did a Yum update last Friday. It was done before 5.6 was released so I still have 5.5 + various updates. Yum is now giving me a segmentation fault when I try to run it. I believe it has to do with an improperly synchronized version of sqlite which was updated and then Yum stopped working. I'm guessing that installing the latest Yum RPM will fix the dependency issues. Will this throw me out of sync with for instance updating to 5.6?
When I install GNU Common Lisp, and run (help), it suggest that as a next step I run (HELP 'CONS). This halts with a segmentation fault.<br>When I attempt to install the CVS version, the installer compains and bails, also with a segmentation fault.<br>If the fault in my hardware, or is it a program bug that should be reported to someone? If hardware, how do I force a full fsck on /dev/sda when I boot up?<br>Instinct tells me the problem is in gcl (GNU Common Lisp, stable or CVS either one), because I'm not seeing problems otherwise.<br>
Using Ubuntu 9.10 & Pidgin 2.5.5 (upgraded from 2.5.2 while writing this post, but it did not fix the problem)This problem appeared after closing pidgin and trying to run it again i.e. restarting it (I have to restart it at some point after a long runtime, but that is another issue), it fully loads up (at least, it looks like it) and then instantly crashes with segmentation fault message. Judging from the first glance on the log, the crash has something to do with the windows live protocol.Of course, I have tried searching the web and this forum for an answer, but could not find any suitable one. There is one solution I have found, that is: (re)moving the .purple folder, but that "solution" is not really an option.
When I open up epiphany, it prompts me to either recover or don't recover my session. No matter what the decision, it outputs a segmentation fault. I can load it with a -p switch, as well as loading it as sudo (just to test) so I'm kind of thinking if i can re set the session to default, then I will be able to get around it?
I haven't been able to test this though because I cant find where the config files for epiphany are! It doesn't output anything useful other than segmentation fault. As for openshot, I JUST installed it, and it installed with no errors, but when I try and run it, this is the output
Code: OpenShot (version 1.1.3) Process no longer exists: 27456. Creating new pid lock file. A new frmMain has been created Segmentation fault
I am unable to successfully start either the XFCE or Gnome desktops, in Gnome the my wallpaper is displayed but that is all. This problem appeared yesterday night after my hard disk filled up, then all Gnome programs began to crash, also "df" failed to terminate. I was able to clear some space from the terminal (around 2 GB).
I was able to run an xterm so I attempted to load the components of Gnome manually from the terminal, to see which were problematic. I found that every application which uses Gnome fails to execute, producing a segmentation fault. A Java crash informed me that a "problematic frame" producing SIGSEGV was libgnomevfs-2.so.0. I ran md5sum on all libraries matching the pattern /usr/lib/*gnome*, the checksums are identical to those on a working Ubuntu installation, so it is unlikely to be corruption of a library.
I have managed to determine that the problem is not in GLib or GTK+ as I wrote a simple (hello world) GTK+ application which executes without problem.Furthermore (due to a lack of Gnome's network manager) I am without a network connection on the problematic computer.
I have been a Windows user for many years but heard lots of good things about Ubuntu and wanted to give it a shot. I have a VMware ESXi 4.1 server so I created a new VM (Ubuntu desktop 32-bit), downloaded the Ubuntu 10.4 32-bit desktop image, mounted it, and started the installation. Everything worked fine and I got a working Ubuntu system. I created a snapshot just in case I need to get back to this position.
I then saw a prompt from Update Manager and decided to update everything it told me to, which is 300 updates. At the end, I was asked to restart and I did. At that point, the system was not willing to start again. Here is what I get (... stands for omitted text):
Segmentation Fault Gave up waiting for root device. Common problems: - Boot args (cat /proc/cmdline) - check root delay ... - check root ....
[Code]....
I have no clue what to do at this point. I tried going back to the snapshot a few times but always ended up in the same state after installing updates. I tried installing VMware tools before the running the update but it didn't make a difference.
