I am trying to install vnc server on fedora 10. I downloaded & installed vnc-server-4.1.2-35.fc10.x86_64.rpm as root. and made following change in /etc/sysconfig/vncservers file
VNCSERVERS="1:vct"
VNCSERVERARGS[1]="-geometry 800x600 -nolisten tcp -nohttpd -localhost"
as vct user set vncpasswd
and as root user started vncserver by
service vncserver start
[Code].....
and xstartup file in roots home dir is also same.
I try to install my Fedora 12 machine from my http server.but i fail to install it on the client side machine give me a error like
unable to retrieve.Here is the step what i did.
1)I copy the entire my rpm of F12 DVD to the /var/www/html/rpm
2) and start the http server (my http server is start without any problem).
3)on the client side machine i booted from f12 dvd after askmethod i select url.
4)and enter the ip address of 192.168.10.2(for client ip address),192.168.10.1(gateway),and 192.168.10.1(nameserver)
5)after that i enter the [URL] this is my http.conf file
<VirtualHost 192.168.10.1>
ServerAdmin root@server.homepc.com
DocumentRoot /var/www/html/
DirectoryIndex index.html
ServerName server.homepc.com
</VirtualHost>
Note => i configure the dns server on 192.168.10.1 machine , and this machine is also a my http server.
192.168.10.1 has a domain name of server.homepc.com
192.168.10.2 has a domain name of client.homepc.com
I'm trying to install Fedora 14 on my netbook using a network PXE server on my laptop. I can see in the syslog, that initrd.img and vmlinuz get sent over tftp. The problem seems to be in my kernel parameters:
LABEL fedora14-EFI-boot-i386
kernel /images/fedora14-EFI-boot-i386/vmlinuz0
MENU LABEL fedora14-EFI-boot-i386
append initrd=/images/fedora14-EFI-boot-i386/initrd0.img ksdevice=bootif lang= kssendmac text ks=http://192.168.2.1/cblr/svc/op/ks/profile/fedora14-EFI-boot-i386 selinux=0
ipappend 2
On booting up the netbook it can't find a root device. I'm not sure what to specify for the root= because I have deleted all the partitions on /dev/sda. I did this because originally it kept booting up the old OS, and I assumed there was a way to format the disk as part of the install. I'm stuck now and was hoping someone with more experience of bootloaders might be able to help. If possible I'd like to do this using the network rather than a usb.
I cannot install ubuntu server 9.10 to vmware server 1.0.6.. is it the version of my vmware? everytime i try to install ubuntu 9.10, nothing happens..
View 2 Replies View Relatedi am justin i'm 17 years old and new with linux, i use ubuntu and linux mint 7 and a friends of my has a dedicated fedora server. he asked me to intall a desktop manager ( or something that is the same, dont know how to call it ) so he could use remote desktop to acces his server
i have connected the server trought ssh and i am in the terminal. Now i want to install kde or gnome so i and my friend could use the server as a mail en WWW bla bla bla server. and my question is how i need to do that i tryd : yum groupinstall "KDE (K Desktop Environment)" and yum groupinstall "X Window System" but none works i have seen those commands on this forum so i tryd it.
i want to install my f12 machine via http server, plz guide me how can i set my http server for that .
View 1 Replies View RelatedHow Do I install APT on my server? I need to use apt-get to install software on my server
View 7 Replies View Relatedhow to install usb-server-x64.tar.gz on my fedora12?
ok i did this tar usb-server-x64.tar.gz
i dont know how to compile
I want to install vmware server on fedora 11. I have tried to and have had issues. how to install.
View 14 Replies View RelatedI m facing a very strange problem while installing F10 from my NFS server , on the other hand i can sucessfully mount the directory from nfs server to client , but fail to install F10 from the same server,i created the F10 ISO image in the /mnt directory and share it via nfs server.
here this is my Exports Directory
/mnt/ 192.168.10.0/24(rw,sync,no_wdelay)
I am trying to install mysql-server using the command
But get the following error:
How to install SVN server in Fedora. And how can i configure it with apache service. That is manage svn server using HTTP. How to test from a client machine.Kindly help me out. Im new to linux platform.MUser are into LAN connectivity in Location B server. wheras this server shud act as a proxy server and update the database to the Location A server.
View 1 Replies View RelatedI am new to fedora and linux. I have spent the past three days figuring out how to install nvidia drivers for linux. I figured out how to install the drivers but I can't seem to turn off the x server to install it. Everyone says to go to init 3 or what ever, but when I try doing that I just guess this message saying powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor. powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor. powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor. powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
and i also tried sudo /etc/init.d/gdm stop but it just says command not found. my gdm is in the usr/sbin directory idk if that has to be changed or not but i'm really new to this and I am completely lost.
I have been requested to install a Fedora Kernel from source. As such i have found the below src.rpm: [URL] how to install this much newer kernel onto my server from src.rpm?
View 10 Replies View RelatedI'm trying to install FC 12 or 13 on an HP DL380 G6 server. The problem occurs just after the image is loaded off of the DVD. After a bunch of boot messages scroll up the screen, a final message appears stating waiting for hardware to initialize. At that point, the video signal goes away and never comes back. I have to power cycle to regain control. If I select the option to do an install with a basic video driver, the installation proceeds beyond that message and I can finish the installation, however, my graphics resolution is 800x640 and I can't change it. Is there a reported compatibility problem with the HP server and FC? Is there something I can do so that I can get past the failure and be able to operate with a decent resolution?
View 5 Replies View RelatedWhat is sudo? I tried to do this : sudo apt-get install mysql-server
And then it gave me this :
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:
1) Respect the privacy of others.
2) Think before you type.
3) With great power comes great responsibility.
[sudo] password for mlocicero: mlocicero is not in the sudoers file. This incident will be reported.
I am using F14 Kernel 2.6.35.13-91.fc14.x86_64 and I tried to install VMWare Server using this toturial Click Here .
Unfortunately, I got this error "There is a problem compiling the vmnet module after it was patched." in this step on the second page:
Code:
Note that I used the names on my Laptop and here I am attaching What I Have done.. (txt is attached)
How to install any vmware Because I have to install Windows 7 on it.. Note that mine is 64-bit
I need a solution for my problem, I need to install and manage my clients & servers through active directory, currently server have installed FC10, I want to install Windows 2003 Server Enterprise with AD (Active Directory) but this installation update the MBR of hard disk, so how can recover or reinstalled the grub w/o re-download the FC10.
View 1 Replies View RelatedI tried installing RHEL5 server edition in my laptop and it couldnt detect the video card and so the installation continued in the blue screen and i didnt get the usual GUI for installation so i discontinued the installation.can anyone help me how to i install this.Pls i am in need of RHEL in my laptop.
View 3 Replies View RelatedI have a remote server running Fedore Core 11 - 32bit. On a new install, I installed webmin (control panel). Now every time I want to install something I get the same error message:
root XXXXXX # yum groupinstall web server
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again.
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that,
but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
I saved on home folder RealVNC server 4.1.3-86 and want to install on Linux.I don't know much about Terminal commands ... Please guide...waiting for your quick response!
View 3 Replies View RelatedIm doing a security based project in an organisation. In that,we have to provide authentication of each user who logs in. To store information of all employees we are using LDAP server. The problem is some of the packages of LDAP server like openldap-servers are not installed in fedora. How to install particular packages in fedora?? or should we install the whole LDAP server again?
View 1 Replies View RelatedI'm looking to install either vmware server, virtualbox or another solution.
Which works the best with fedora 11? I'm interested in USB and performance.
btw, I wasn't sure which forum to put this in
I like to know how to install/configure mail server in Fedora 11, as I am going to do it first time.
View 3 Replies View RelatedI want to install a software to my computer, I've mounted that server directory, so I can visit them in the x-windows, but I can not install the file as it requires to be root, the help file of that software gives a command for installing to linux system like this:
# /net/....(server name and directory path)/setup
but when i use this command it says wrong, as this is not a recognized path, just wondering is there a similar command in Fedora that I can access to the net directories in terminal?
I was wondering what version of Fedora I have to install on a server in a professional environment. At the moment I install the Fedora 14 (minimum) version 64bit. Is this a good choice?
View 8 Replies View RelatedI need to install a command line server without gui and smallest as possible Is there a option on installer to obtain a minimal server?
View 4 Replies View RelatedI want to Install RHEL 4.7 64 bit on one my server (Supermicro Super Server) having RAID controller1. Intel2. AdaptecWe are using Adaptec.We are using RAID 1 with 2x320GB Hard disksPOINT: If we Install RHEL 5.3 it recognize RAID controller and show single Logical volume of 298 GB, Means working fine but when we try to install RHEL 4.7 it shows two hard disks of 298GB and 298GB,meanz its unable to recognize RAID controller.So, the issue is Driver of it, CD which we got from super micro having driver for RHEL 4 to RHEL 4 update 6We are making our DR site and its necessary for us to Install RHEL4.7 to make it identical.I searched a lot and spent more than three days on it continuously, And still unable to find the solution.
View 9 Replies View Relatedshould i install LVM in ubuntu server?
i have only one primary partition.
what happens if i dont install it?