General :: Install The Driver/firmware Information In Ubuntu 10.04

May 1, 2010

I have the HVR-2200 TV card, which works great in windows, And I have found the linux driver.[URL]... What I cant do is figure out how to install the driver/firmware information in Ubuntu 10.04.

View 3 Replies


ADVERTISEMENT

Ubuntu :: Windows Driver Firmware - Error "Wireless Connection (Firmware Missing)"

Jun 4, 2011

after installing Ubuntu Natty Narwhal 11.04, I'm experiencing tons and tons of complications with the wireless Internet connection. I have solved most of them. Now I have only one thing left. When I hit the drop-down menu for wireless connections, it says "Wireless connection (Firmware missing)"

I have installed the driver for my wireless card but what is the firmware? I honestly don't know what it is although it's very basic. I have a Broadcom 43xx as my wireless card (specifically 4306). How do I get the firmware for it? Do I find it in Windows? Also I cannot get b43-fwcutter because I have absolutely to Internet connection on Ubuntu. To post this, I'm using Windows.

View 4 Replies View Related

Debian Installation :: How To Force Load Realtek-firmware Driver During Install

Dec 25, 2015

Now, my issue is that I have no access to ethernet in my apartment so I need to rely on wifi for my install. But during the install when it is looking for the network hardware it never sees the TP-Link Dongle and never asks if I wan to load the firmware. I even tried it with the CD image that has the non-free drivers included but it never asks for the drivers. Any other distro, like Linux Mint 7.3, sees the dongle fine.

So is there a way to force load the realtek-firmware drivers during install?

View 14 Replies View Related

General :: Where Is Firmware Driver Located For ATI Radeon

Apr 21, 2010

Where can I find the firmware driver RS780_pfp.bin for ati/radeon? [URL please]
Trying to resolve this message.

[ 2.880560] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
[62.880180] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[62.880262] [drm:r600_startup] *ERROR* Failed to load firmware!

View 2 Replies View Related

Ubuntu Networking :: Set Up Router With Tomato Firmware To Save The Bandwidth Usage Information?

Mar 20, 2010

I'm trying to set up my router, with tomato firmware, to save the bandwidth usage information. One of the 'save history' choices is "CIFS" ... I'm lost as to how to create this save area..anyone able to give me a link to a 'how to' ...or if you've done it, perhaps a step by step?

View 1 Replies View Related

General :: Unable To Install B43 Firmware

May 2, 2010

Actually,my ubuntu 9.1 was running smoothly but now it gives a message to install b43 firmware and a site name to install it.I could have installed it but ubuntu just get stuck after that message.Is there anyway to install through windows?

View 1 Replies View Related

General :: Arch Update Failed - Error "firmware: /lib/firmware/radeon/R700_rlc.bin Exists In Filesystem Note That In The Beginning"

Jul 4, 2010

I can't my system because of this error: Code: linux-firmware: /lib/firmware/radeon/R700_rlc.bin exists in filesystem Note that in the beginning, it asks:

Code: :: Replace kernel26-firmware with core/linux-firmware? [Y/n] There are so many updates by now that the list fills in a few pages in the terminal! Also, I wonder why so many Arch updates get stuck or broken compared to almost any other distro? Is it poorly designed packages? Is it a design flaw in pacman/the package format?

View 6 Replies View Related

Server :: Debian On HP ProLiant DL380 - NIC Driver Installation - Firmware-bnx2

Apr 5, 2011

I have a HP ProLiant DL380 server and I am trying to install Debian on it.

I had an error that said dhcp configuration failed at the base installation and Debian found my NICs but asked for driver.

I've Googled it and found out that I need to install required Broadcom NetExtreme NIC drivers.

There are images that 3rd people have created but I don't want to use them as it will be a server.

Another way to install them is to download .deb package and install it from a removable media when asked.

So I went ahead and did an expert install mode and choosed adding packages from a media so an option appeared for me to install stuff from removable media now.

Each time I choose it, my flash drive's lights are blinking but then I am getting an error says this package can not be installed are you sure to install a non signed package.

I say yes at that stage but I still can't install and then it says this is probably happening because of kernel version miss match.

I downloaded latest stable copy of Debian and also downloaded the stable squeeze copy of the driver from official Debian site too. [url]

Is this a kernel mismatch between my Deb. version and the driver?

And after many try my server started hanging at detecting network hardware stage, how can I deal with this?

Also finally I started to get this...

[url]

Is this happening because I am using wrong architecture CD?

I have i386 image and my server has 2 x Pentium 3 processor.

View 1 Replies View Related

Ubuntu :: Driver Information From Terminal For NVIDIA6600gt

Mar 6, 2011

I'm trying to find out which drivers are being used for my Vidio card, I'm running ubuntu 10.10 and my card is a NVIDIA 6600gt.

View 9 Replies View Related

Debian Hardware :: Radeon X1050 - Is This Card Supported In Squeeze By Either The Non-free Firmware Or The Proprietary Driver

Jan 13, 2011

Is this card supported in Squeeze by either the non-free firmware or the proprietary driver? I just got one to stick into an older box that will be going to a college girl that wants the 3D desktop in KDE. The built-in video was a joke and wouldn't even work without compositing. It was one of those crappy, non-standard pieces of crap known as a "Unichrome" (not the pro).

View 10 Replies View Related

Ubuntu :: Installing Canon Printer Driver - Missing LSB Information

Jun 8, 2010

I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is

Code:
sudo update-rc.d ccpd defaults 50
which gives me the error

Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.

I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.

View 2 Replies View Related

General :: Make NIS User Information Override Local User Information On Client Systems?

Jul 30, 2011

How would you make NIS user information override local user information on client systems? This is what I think is right? Add nis on the passwd registration file on the second line Is this correct?

View 1 Replies View Related

Ubuntu :: Install 10.10 On My PS3 With Latest Firmware 3.56?

Mar 9, 2011

Is it possible to install Ubuntu 10.10 on my PS3 with the latest firmware 3.56? If so is their any guide to follow?

View 1 Replies View Related

Ubuntu :: Install A Firmware Update?

Apr 30, 2011

I am having connection problems with my Ralink card under Natty Narwhal (11.04) on my netbook. Since I bought the machine over 2 years ago, I have never done any hardware updates. Today I came a across a *.bin file to update the firmware on my card.

View 4 Replies View Related

Ubuntu Networking :: Install Drivers/firmware Because Presumably There Is No Out Of The Box Support

Sep 16, 2010

I'm a first time user of ubuntu and any other form of Linux. I decided to install ubuntu on an old Dell Latitude D600. The LAN controller is a Broadcom BCM4306 [14e4;4320] (rev 02). I honestly thought that once I installed ubuntu I would have no problem connecting to my wireless router. I was wrong.

A FAQ on this forum states that I need to install drivers/firmware because presumably there is no out of the box support. I read the FAQ [URL]..Debian and it seems that I need to get the driver/firmware then issue some command to put it where it needs to go.

View 1 Replies View Related

Ubuntu :: 10.10 - Unable To Install Wireless Firmware And LAN Connection?

Mar 5, 2011

I can't install the wireless firmware for Ubuntu 10.10, I don't have a LAN connection.

View 2 Replies View Related

Ubuntu :: Installed An HP LaserJet 4250 Using The Hp 4250 Postscript Driver - Message - Getting Printer Information

Mar 18, 2010

I have installed an HP LaserJet 4250 using the hp 4250 postscript driver. The printing works but when I click on File->Print on any application (Open Office or Document Viewer), the message "Getting printer information" is beside the printer name and the print button is disabled. After 5 or so seconds, the print button becomes enabled and I can print. This happens every time but did not when I first installed the printer. I would prefer to determine the cause rather than delete and re-install the printer.

View 7 Replies View Related

Hardware :: Install A Firmware On DIR-635 Router ?

Dec 21, 2009

I have a D-Link DIR-635 version:B1 and i was wandering if there is a linux-based firmware that can be installed on.

View 6 Replies View Related

Ubuntu / Apple :: Failed To Install ISight Firmware Tools

May 9, 2010

Once I download and install isight-firmware-tools. I am supposed to redirect it somewhere. I tried keeping the default thing set, but it failed to install that way.
(MacBook 3,1. 10.04 LTS)

View 2 Replies View Related

Ubuntu :: Acer Aspire 5100 Uses A Broadcom LAN - Install The Firmware

May 12, 2011

After loading Ubuntu 10.10 on an Acer Aspire 5100, I find that the onboard LAN does not work. My router "sees" the laptop but my laptop does not "see" the router. Ubuntu says that the firmware is not installed.

I read earlier posts about an issue with Broadcom and later editions of Ubuntu but I haven't seen a definitive fix. With the LAN not working, it is not possible to connect to the Internet and further compounds the problem. My understanding is that the Acer Aspire 5100 uses a Broadcom LAN. How can I install the firmware that it is asking for?

View 9 Replies View Related

OpenSUSE Install :: 11.2 And Kernel Firmware Installation

Dec 27, 2009

Wonder if it is advisable/mandatory to install the kernel-firmware package, on a 11.2, with following installed kernel:
2.6.31.5-0.1-default #1 SMP 2009-10-26 15:49:03 +0100 x86_64 x86_64 x86_64.

View 8 Replies View Related

OpenSUSE Install :: Firmware Test Reported 4 Errors

Nov 29, 2009

After installing 64 bit 11.2 with no apparent problems: computer hangs up on desktop boot opensuse 11.2-2.6.31.5-0.1, however I can boot from failsafe opensuse 11.2-2.6.31.5-0.1. I had problems trying to install Ubuntu so I checked out the opensuse. I do not know if this is an easy fix! I decided to avoid buying anymore windows system software. I ran memory test with no problems. The firmware test reported 4 errors. I have windows XP installed on other hard drive - no problems there.

View 5 Replies View Related

OpenSUSE Install :: A Lot Of Troubles During Inst. (FIRMWARE Errors)?

Feb 19, 2010

I am getting crazy with my system.(I got the machine from previous guy working on it with XP, I installed myself linux, but with zero experience, 2 years ago).starting point yesterday:3 HDs in raid, SUSE 10.3 x64 installed on sdc1 with problems, XP on sda, SUSE 10.2 x32 on sda as well:

Code:
Disk /dev/sda: 250.8 GB, 250808893440 bytes
255 heads, 63 sectors/track, 30492 cylinders

[code]....

View 3 Replies View Related

OpenSUSE Install :: Saving The Result From The Firmware Test Of 11.2 DVD?

Jul 12, 2010

From the start-up manual I know the Firmware Test Starts a BIOS checker that validates ACPI and other parts of your BIOS. I noticed there are 3 failures in the result. (The font size on the screen is too small for me to read.) I got stuck in trying to save to either of the two choices provided with names I don't understand. I had to use the three-finger salute to bail me out.

View 4 Replies View Related

OpenSUSE Install :: Installing 11.3 64-bit Version On A Macbook Pro (5,4 Firmware 1.8)?

Aug 13, 2010

I am trying to install OpenSuse 11.3 64-bit version on a Macbook Pro (5,4 firmware 1.8). The laptop will only run Linux and no OSX so I want to use the entire disk for OpenSuse. With that in mind, during install I switch to expert mode:

1. Delete all partitions
2. Create a new "msdos" partition table
3. Create sda1 as ext4, format and mount "/" on it
4. Create sda2 and assign it as swap partition
5. Continue the remaining install as normal.

After reboot, grub loads up but boot hangs at:

Error 13: Invalid or unsupported executable format

For context, I have tried Fedora and Ubuntu on this laptop and both hang at "Uncompression Error -- System halted" error. I ran memtest on the laptop and all LiveCDs run fine on it so that rules out hardware issues. My guess is that with Fedora and Ubuntu, both use grub2 and there is some complication with grub2. CentOS and OpenSuse seem to use grub and that gets me as far as loading the kernel but then boot hangs after initrd loading at the error above.

View 2 Replies View Related

Networking :: Fedora - Firmware To Install To Get WIFI Active

Jan 24, 2011

Hello, I just installed fedora on my Dell Insprion 1545 labtop but don't know what firmware to install to get WIFI active.

View 1 Replies View Related

Fedora :: Write A Program Which Would Get Information From A Webpage And Display The Information On Desktop Sort Of Like A Widget?

Sep 3, 2009

I'm trying to write a program which would get information from a webpage and display the information on my desktop sort of like a widget. I kind of remember there being something like this already made, but for the life of me I can't remember what it's calledDoes anyone know?

View 1 Replies View Related

OpenSUSE Install :: 11.2 - User Information Entered At The Beginning Of The Install Gets Lost

Jan 2, 2010

When trying to install 11.2 from DVD, the user information I entered at the beginning of the install gets lost. I get to the Automatic Configuration step at the end of the install where the computer needs to reboot, and it asks for my user ID and password (it shouldn't do that). It won't accept the user I created (always says login failed), but it will accept root. That really doesn't matter, because the Automatic Configuration step has done anything, and I have a busted install. I've tried the install 4 or 5 times, but it is always the same problem. I eventually reinstalled 11.1 without any problem (though I did have to click Use Entire Disk on the partition section so it would delete the ext4 partitions created by the 11.2 install and create ext3 partitions).

View 3 Replies View Related

Ubuntu Networking :: LinuxWiMAX - Firmware Installation - Modem Works Fine But Failing To Install Drivers

May 17, 2011

I switched from windows to Ubuntu 10.10. But I'm not getting along with it as well as I expected I would Specially cause I'm not getting the best out of it due to limited web connectivity. I used to use a usb WiMax modem back in windows (which is also supposed to be supported by linux as my service provider said) for internet. But I'm having a hard time configuring it on my Ubuntu. The modem works fine but I'm failing to install the drivers [url]. I used my cell as a temporary modem to get help from the web.

I downloaded:-
i2400m firmware 1.5.0
WiMAX Tools 1.4.5
WiMAX Network Service 1.5.2

According to the documentation, I'm supposed to install the linux kernel 2.6.35 which Maverick comes with anyway.

Then comes the part to install the firmware. The command I used was

Code:

But unfortunately and annoyingly the result is

Code:

I didn't get it. Am I missing any package or something?

View 1 Replies View Related

General :: Can't Install Driver On Ubuntu 9.04

Jan 13, 2011

Im installing Ubuntu Server 9.04 from a CD, the installer works fine until i need to get the drivers for my RAID card. (this is asked when detecting disk on installation) I put the drivers onto a USB (MSDOS boot diskette) mounted it by pressing ALT+F2 to get a terminal during the installation. then copied the files from the USB to /tmp When I try and run the driver from /tmp i get.

Code:

# sh preinst.sh
sh: 2.4: unknown operand
sh: 2.6 unknown operand

[code].....

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved