i'm trying to install gcc 4.3 on ubuntu 9.10 using the following: sudo apt-get install g++-4.3 CC=gcc-4.3 CXX=g++-4.3 ./install
the first line is ok, but i dont know what to do with the second. if i type both in one command, i get "E: couldn't run package CC" and if i run each separatly, i get "./install not found in the directory" objective: install ns 2.34 on ubuntu 9.10 (32-bit).
maybe everything changed while i was stuck in 10.3 but i noticed soonafter install, and am just getting around to asking:i find these directories in the system's root directory very surprising:
/.config (with one file inside Trolltech.conf, which is empty)
/.kde4
/.kde4/share (empty)
[code]....
This computer that I got as a gift runs windows just fine but being as I am a linux fan I would really like to run linux on it.I tried installing Ubuntu on the PC but it just caused some very very strange problems. (Text placed randomly on the screen + strange sounds coming from the computer).I tried installing Gentoo (my favorite distro) on the PC and it can't find the superblock on the drive. (Error during bootup)I low level formatted the drive and repartitioned it before installing gentoo.
View 14 Replies View RelatedI would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
*edit Nevermind I think I found it on YAST * I have been having trouble finding the "make command":If 'make' is not a typo you can use command-not-found to lookup the package that contains it, like this: cnf makeI need to install 'make', 'g++', and all other building tools for suse.
View 2 Replies View RelatedI've been using Suse on my 7 year old computer for years but now have a shiny new Dell Inspiron 570 MT with AMD Athlon? II X4 630.I thought that I should try the 64 bit version of Suse 11.2 on the new machine and it now dual boots, but I have an ethernet problem.Yast tells me:NetLink BCM57788 Gigabit Ethernet PCIe (Not connected)BusID : 0000:02:00.0Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details.I searched for 'eth' in dmesg output without success but found 'net' in this section:
[ 0.380308] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.380310] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.380401] NET: Registered protocol family 2
[code]...
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
after fresh Install,(ubuntu 10.04),I can't download anything!I get error massage-Archive:
/home/scheri/Downloads/va31.exe
[/home/scheri/Downloads/va31.exe]
End-of-central-directory signature not found. Either this file is not
[code]...
I downloaded and burned to CD LegacyOS. How do I now install it? It says no install file found!It was burned to CD as an iso.
View 6 Replies View RelatedWhen I try to Install Linspire I always encounter the error 25 can please what king of error this. Is this a Hardware problem or what. because this is my first time to use this Linspire....Regarding to xandros when I try to install this I always encounter error 17 but I used express installation and when the xandros ask to restart the pc and start he did not continued execution it appear error 17.
View 5 Replies View RelatedI am trying to install NIC driver, at last when I am using command make the following output is coming. How to come out from this error:
Makefile:65 *** Linux source not found. Stop.
I'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
View 9 Replies View RelatedI am new to deb package. I have read some docs, but did not know how to specify the destination for to-be-installed files. For example, I want to install under user's home directory. How to specify that?
View 7 Replies View RelatedI have fedora 11 (64 bit).i was trying install eldk.so i installed arm-2008-11-24.
After installation when i go for make command it shows error like /opt/edlk/usr/bin/arm-linux-gcc: Command not found details:
I'm using a new Distro and after installing it and randomly searching for help on websites on how to install a .Deb file using dpkg at the konsole/terminal it says Bash : dpkg: Command not found . how is this possible ? Do I have to know about all the packages in the package manager to install this. slight difference for me ... knowing what I have and knowing if I need Apr93-323? (whatever) installed first or not ? The only thing I know is that I have the Iso image installed ... which is my linux distro . Where to go from here? because I usually go to a website site to find Software to install ...if I need it .back to the basics
View 14 Replies View Relatedinstall immunity debugger on system and found it very diff?
View 2 Replies View RelatedI'm trying to migrate from Ubuntu but I'm stuck at partitioning part of the installation... The problem is that the partitions are not recognized (I have NTFS + EXT3). I see only /dev/sda and it says it's unpartitioned When installing Ubuntu I had similar problem and I was solving it by removing dmraid.
View 9 Replies View RelatedI have a netbook with a tiny hard drive, and an external drive to go with it. It's running Ubuntu. I want to be able to install some packages to that external hard drive, so that when the hard drive is not plugged in the netbook still functions, just with out some functionality. It doesn't have to be this way exactly, I just want the effect of offloading some of my installed libraries and programs onto the portable hard drive. In other words, just mounting some directories from the external drive wont work because I at least need some basic programs to run normally.
Here are some things I was thinking about but wasn't able to find enough information to actually understand if they are feasible, or how to go about doing them.
Can I do something like this if I use the --root=/media/external switch of dpkg install and then add /media/external/ to my system path?
What if I create some kind of wrapper for dpkg that will install the package into an alternate root (--root=/media/external) and then create a symlink in the internal file system to every file that was just installed on the external file system?
How about something where I chroot into the external drive?
How about something using LVM?
I'm trying to install amarok from git but I keep getting this error:
[code]...
I thought libXext provided shape.h but I have both xorg-x11-libXext and xorg-x11-libXext-devel installed.
[code]...
I downloaded a mouse theme form gnome look and installed it in the themes. But it has not appeared in the pointer themes section in custimation even though it said that it is installed correctly.When I drag the file to install it again it says something along the lines of it cannot copy a directory over a directory.Where can I find where the mouse/pointer theme is located and delete it. I have searched filesystem, google and these forums and not had any luck yet.
View 1 Replies View Relatedsince ms dos wasn't meant to be booted from cd (it was used from floppy) and i have tried buring the contents of every ms dos floppy to a cd and no dice i am guessing that it needs a bootloader so i can boot up the setup wizard
before anyone suggests that this thread has nothing to do with linux i will just point out that this thread is asking about grub and that is a linux catagorie
I have a user account on a server that runs debian. I do not have the root or superuser password b/c i am not the local system admin, but I want to install a program (djvu2pdf and djvulibre-tools). I did some searching on the internet and found some useful information, but nothing to really tell me what to do.My question, if it compiled succesfully, did it install? Where am I at in the install process? I want it to put the executable files in my /home/usr_acnt/bin/ folder, how do I do that?
View 2 Replies View RelatedI have downloaded the jdk-6u24-linux-i586.bin and gone through following steps.
nuwan@nuwan-laptop:~/Downloads$ sudo chmod +x jdk-6u24-linux-i586.bin
nuwan@nuwan-laptop:~/Downloads$ ./jdk-6u24-linux-i586.bin
It works fine on me. These commands create a folder jdk1.6.0_24 in Downloads directory.
My Question is this. If I want to install packages manually.What is the best way to do it. Where should I put artifacts which generates after executing above commands. Another question, If I use sudo apt-get install sun-java6-jdk where does these downloaded packages are installed. I mean location. I have been using Ubuntu 9.10
In Elastix, I get to amportal.conf via the /etc/ director. The file tells you:
[Code]...
It appears that AMPADMINLOGO=logo.png is calling out to something that is not there. I can't even find AMP directory. See below. Do I need to create a directory? This is the result of an ls -F at my /etc/ dir:
[Code]...
Does anybody know why the upgrade/install of TeXLive on Fedora12 does not create the directory /usr/local/ texlive/2009.I have seen this directory mentioned for other 2009s, but when I installed 2009 it did not create this. (Or, maybe there was some problem... ?) It is only slightly relevant because (sudo) texhash does not include any /usr/local directories in 2009, only /usr/share.
In my 2007 version I had the usual /usr/local/share/texmf/tex structure in which I place /latex and a /bibtex. I had read/write access and so I placed all my .sty and .bib files, as well as image files and other stuff I shared between projects. Now, I have a ~/texmf with /tex and /bibtex and have gotten rid of /latex subdirectory. Now I don't have to texhash when I add new stuff.Other than this, is there any reason why Fedora TeXLive-2009 would not create /usr/local/texlive ? (Unless this is because, as the wiki page notes , "it is in testing state so bugs could occur."
I am trying to install Ubuntu on my Toshiba Satellite 5205-S703 laptop with WinXP Home. The CD/DVD drive no longer works so I have to use the download installer. In fact, I hope to install Ubuntu to help me determine whether the CD/DVD problems are hardware or software related. The computer has no provision to boot from USB either. The download went fine, but as soon as installation started this error message popped up: "An error occured. Could not retrieve the required files. For more information, please see the log file:c:docume~1 oshibalocals~1 empwubi-10.04.1-rev190.log".
View 3 Replies View RelatedAlright, first I burned the image I download to a DVD, first DVD didn't work, but second one did, got to the installation process where it probes everything... and at the end it said "Repository Not Found"..So I copied the image to my external hard drive..And went to install from Hard drive...did the director of the image by just putting openSUSE-11.4-DVD... etc...because it already does hd:I had tried F: before, and it didnt work either..And yet again, I get "repository not found"....btw, THIS IS FROM CLEAN INSTALL< I HAD TO ERASE XP and the external is a NTFS hard drive with about 12 gb's free.
View 9 Replies View Related-the command to copy the file Practice.txt to a new name of Myfile.txt while in the home directory-found
-command to create a directory in the home directory-found
-say i just created a new directory called "test". whats the command to delete the test directory.-found
-command to create a blank, text file without using an editor.
-the exact syntax in Linux you would need to rename the file to a new name-found
I need support for adjusting over/underscan for my Mitsibushi WD-Y577 57" DLP HDTV (a breed between WD-57733 and WD-57734), because the open source ATI Radeon driver does not include it. When I attempt to install fglrx, here's what I'm getting:
apt-get install fglrx
Code:
Loading new fglrx-8.723.1 DKMS files...
First Installation: checking all kernels...
Building only for 2.6.33.5-rt23
[code]....
I have compiled 2.6.33.5 from source and patched it with 2.6.33.5-rt23. I have adjusted features take a lot of things off that I don't need. I need the real-time kernel for music creation using JACK (Jack Audio Control Kit).
Adjusting over/underscan requires an AMD Catalyst Control Center. Will there be future open-source ATI drivers that allow me to correct my display without having to change modelines in xorg? It will take a lot of trial and error to figure this out for my display. Note that even if I did install the kernel headers for 2.6.32-23-preempt or 2.6.33-23-realtime (depending on what I use), fglrx module will still fail to install, even if I install linux-source. I'm confused. I do want fglrx and I do need the real-time/low-latency kernel for music creation under Ubuntu 10.04.
Update: if you create a utsrelease.h header file inside /usr/include/linux directory, you can write out like this:
Code:
#define UTS_RELEASE "2.6.33.5-rc3" # replace the version number for your running kernel. You can then reinstall fglrx, but then I get this:
Code:
DKMS make.log for fglrx-8.723.1 for kernel 2.6.33.5-rt23 (x86_64)
Sun Jun 27 19:45:11 EDT 2010
AMD kernel module generator version 2.1
doing Makefile based build for kernel 2.6.x and higher
[code]....