I used this password Pass1234 when I search password stored its Nh2yEjhdHIwtY what kind of encryption is used? I thought it was crypt() , but when I create crpypt on my local machine its different.
View 3 Replies
I am building an active directory and using BIND9 as my DNS. To allow for secure dynamic updates from the domain, I am enabling GSS-TSIG as detailed here and here. Unfortunately, some of the commands and configurations used here seem to be depreciated, at least in the newer versions that I'm using. My issue is one of keytab encryption. I generated a keytab using ktpass.exe on the Windows Server 2008 domain controller. I have tried DES/MD5, AES128/SHA1 and AES256/SHA1, each have been turned down by ktutil on the kerberos server (FreeBSD). Each time, it outputs the following error: ktutil: AES256/SHA1*: encryption type AES256/SHA1* not supported *Respective to encryption used.
I cannot find a list of suitable encryption schemes that ktutil will accept. The FreeBSD handbook details a means of producing a keytab file, but I'm not sure how to configure the Domain Controller to use the keytab.
Using sudo iwlist scan, i will get a list of surrounding AP(s) around my laptop, is there a way to interpret the sudo iwlist scan results so that we can know what encryption type is the wireless network using?
View 3 Replies View Relatedthere is one problem i encountered here while working with Embedded Artist board or Lpc 2478 uclinux.so my questions.what type of encryption does this uclinux use to encrypt the password?instead of using these 2 username and password,can i put my own password and username?
View 1 Replies View RelatedWhat should my partitions look like? I want to install this to my hard drive, I'm currently running it from DVD.
My drive is sdb
It has 153.3 GB (157065 MB)
I want to know what format type should the partitions be, and how many megs they should be. Which partitions to encrypt, and which I don't need to.
I want to know whether the DVD inserted is a DVD+R, DVD-R, DVD+RW, DVD-RW. I tried using CDRTOOLS but its not displaying the device information instead showing the driver information.
View 1 Replies View RelatedI need commands which five me the following details abt all the file systems mounted the linux box
type
mount pt
file system id
I installed a wireless card on my desktop (TRENDnet TEW423-PI) and it works just fine thus far.Unfortunatly, I forgot my encryption key and have tried to get into my router but that unfortunatly that does not work. How can I find my encryption key so I can get on my network???
View 3 Replies View RelatedI was consulted to find those "preference for encryption" in system or "accessoires" in applicaton to change the password for network. but I don't have them both in the menu. I am totally blocked with different passwords for the session and the network.
View 7 Replies View RelatedI am running Red Hat Enterprise Server 6.0 I am having issues getting kerberos configured as a client to join a domain. Im getting below error message. "Failed to join domain: failed to connect to AD: KDC has no support for encryption type"
View 9 Replies View RelatedI am copying the file form one directory to another directory using shellscript.
Here i want to get the Mimetype/Content-type of the file.
How to i can get the MimeType.
I'd like to find all files of a specific type (as determined by the terminal "file" command) from the command line ... and haven't been able to figure out a way to do so. For instance, I'd like to be able to find all JPEG files in my filesystem, even if their names don't end in .jp*. It would be helpful to be able to combine this with other tests in find, so that I could type something like "sudo find / -atime 0 -size +1M -type adobeflash" or something like that.
I've looked for ways to hook find up to file and tinkered around with a few ideas involving pipes, but nothing seems to get what I want.
I've seen the screenshots and I thought I'd give it a try. I got it off the repos and restarted my system after the installation. But I cannot find it in the Session Type menu in KDM.
View 4 Replies View RelatedWhen I run 'parted' and then type 'print' to see the partitions that are available, I see two entries: /dev/sda1 and /dev/sda2. /dev/sda1 is of ext3 type whereas for /dev/sda2 nothing is specified for file system type. The LVM flags are set for /dev/sda2.
When I tried to resize /dev/sda2, it gives me the error "File system type not recognized". let me know how to find out the file system type of the partition.
I just upgraded my laptop (thinkpad T61) OS from Lenny to Squeeze. Everything worked fine out of box except I found when I use pcmanfm or nautilus, I couldn't locate the cursor focus by typing a letter that a filename begin with. It is something I used heavily everyday and I just couldn't lose it. Since it failed in both pcmanfm and nautilus I think it might has something to do with Squeeze.
View 2 Replies View RelatedWhat are my options for encrypting the /home directories of my Ubuntu laptops? They are currently setup without any encryption and some have /home as a separate partition whilst others don't. Most of these laptops are single-user standalone laptops which are out on the road a lot.
Is ecryptfs and the encrypted Private directory good enough or are there better, more secure, options? If somebody got hold of the laptop, how easy would it be for them to gain access to the encrypted files?
I have PDF files secured using 256-bit AES, requiring a password to open the file (Acrobat 9 or greater)
I can use Foxit Reader or Adobe Acrobat just fine on Windows, but I can't view those PDF's on Ubuntu or Mac OS X. What PDF readers for OS X and Ubuntu support 256-bit AES?
In my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
I just loaded octave. I ran through a few examples of how to implement a script file. Everything works until I get to "plot". When I run the "plot" command I get the following.
octave:2> test1.m
error: can't perform indexing operations for <unknown type> type
sh: gnuplot: not found
Just to double check my work, I ran the following code:
y=[1 2 3];
plot(y);
how to test the AES Encryption in the openSuSE 11.3
View 1 Replies View RelatedQuestion: The USA forbids the export of secure cryptography. NSAKEY has already been discovered in the Windows cryptograhic API. Since the Linux-Kernel is hosted in the USA, how secure is its cryptography ?
View 1 Replies View RelatedCurrently I am wondering whether it is possible to apply asymetric encryption of a directory in Linux.
I would like to achieve the following:
Write log files to /var/log/secret Everything written to /var/log/secret is instantly encrypted by a public RSA key (or something similar)
The encryption programms I know, i.e. ecryptfs do not support asymetric encryption of files, at least as far as I know. (Correct me if I am wrong). Therefore I am asking here whether you know of any possibility to implement this.
I've accidentally encrypted my 8GB usb stick instead of my 4GB stick and now I need to revert the encryption on the 8GB one. There doesn't seem to be an option like this in the TrueCrypt interface when I mount the USB.
View 2 Replies View RelatedI am using dd_rhelp to recover data from a failed 80Gb hard drive with Windows XP and PGP encryption.
My question: How do you mount a drive encrypted with PGP under Windows on a Linux box?
My scenario...
1. I am new to Linux
2. I do not know the PGP passphase
3. I am using Ubuntu and Knoppix
4. I have another 80Gb drive as the target drive
5. Source (bad) drive /dev/sdc1 drive is attached via a SATA-to-USB adapter
6. Target (good) drive /dev/sda1 drive is installed in laptop
My Problem....
Copies data from source to target drive with many errors. When I view the files copied to the target disk they file names are gibberish (extend character sets for file names) with huge file sizes (up to 9Gb).
I plug the target drive into a Windows laptop and it does not recognize it, even though it was formatted as ntfs.
I have been trying to perform a netinstall (of Debian). Will the WPA encryption on my wireless network prevent (or at least make difficult) the netinstall? Will I need to have the WPA password handy or even to temporarily remove the encryption?I haven't actually run into this problem yet; what I was dealing with on the last attempt, before I decided to finish the netinstall later and went back to my working Linux system (I got impatient with being stuck outside it), was that the netinstall couldn't detect my network by DHCP, and wanted me to enter an IP address. I don't suppose that would be any more difficult than going to the host computer and writing down its IP address, but thinking ahead, I wondered whether the WPA encryption would pose another problem.I didn't really think about these issues when deciuding to try a netinstall: whether my internet connection would work. I mean, if it doesn't, trying to netinstall is a waste of time.
View 1 Replies View RelatedI connect wireless success
WEP Encryption Key:10chars
Interface Type: 802.11b/g
well now in my windows pcs changed to
WEP Encryption Key:26chars [windows success]
what choices must change in ubuntu 9.10 for the new change?
Can you tell for 26chars WEP, what choices do not try [Not Appropriate], so find the solution for the right choice[selections of the form - WLAN CONN] easier of the remaining? E.g. Do not try "40/128..." but "128 passphrase"...?
I have a server hacked when i try to log in i type root but won't let me type a passwdthere are no services up, can't see page mail nothing
View 11 Replies View RelatedI'm trying to compile a program and it gives me the following:
I checked cmath-util.h:46 and cmath-util.h:48:
I'm not a C person, and the author is unavailable so far.
Bitlocker is a harddrive encryption data protection tool which comes with Windows Vista Ultimate and 7. Does anyone know an equivalent for Linux distros like Fedora and Ubuntu?
View 3 Replies View RelatedThe only reason why I don't use Linux (even though I prefer Linux over Windows, and can do everything faster and more efficiently) is because each time I try to learn about dm-crypt I give up.
Can someone point me in the right direction for full OTFE on Linux (like TrueCrypt)?
