What should my partitions look like? I want to install this to my hard drive, I'm currently running it from DVD.
My drive is sdb
It has 153.3 GB (157065 MB)
I want to know what format type should the partitions be, and how many megs they should be. Which partitions to encrypt, and which I don't need to.
My old computer came with two disks, with Windows XP on one. I installed Fredora on the other.
I also resized the c: partition on the first disk and added a second partition which I formatted as fat32.
I then mounted that partition with its entry in /etc/fstab such that I could write to it as myself.
I have a new computer, 64 bit and running Windows 7, which I want to organize roughly the same way. I will install Fedora 14 on its seond disk. I've shrunk the c: partition under Windows using Disk Management. I want to create a 100 Gb D: partition on the same drive in the remaining space, and I want to be able to access both c: and D: for reading and writing by root and I want to be able to access the d: drive for reading and writing also by myself. Since it is a 64 bit machine, my choices for formatting the d: drive are HTFS or exFAT. Does it matter which I choose so that I can do what I want? How does Fedora treat exFAT?
Can anyone remind me which packages I need to add in order to be able to read NTFS file systems from Fedora? Can I also write to such a file system as root?
Can I write to such a file system as myself if I mount it properly?
I am new with fedora and I get this error when I am using movie player [URL]
View 12 Replies View RelatedI'm using Ubuntu 10.04 LTS. I want to keep my some Files in Encrypted form. Those files may be Audio/Video/Text/etc. Or to Encrypt a specific folder in which I can Store my Important and Secret Files. Which one is the best in Performance?
View 4 Replies View RelatedI am building an active directory and using BIND9 as my DNS. To allow for secure dynamic updates from the domain, I am enabling GSS-TSIG as detailed here and here. Unfortunately, some of the commands and configurations used here seem to be depreciated, at least in the newer versions that I'm using. My issue is one of keytab encryption. I generated a keytab using ktpass.exe on the Windows Server 2008 domain controller. I have tried DES/MD5, AES128/SHA1 and AES256/SHA1, each have been turned down by ktutil on the kerberos server (FreeBSD). Each time, it outputs the following error: ktutil: AES256/SHA1*: encryption type AES256/SHA1* not supported *Respective to encryption used.
I cannot find a list of suitable encryption schemes that ktutil will accept. The FreeBSD handbook details a means of producing a keytab file, but I'm not sure how to configure the Domain Controller to use the keytab.
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
I used this password Pass1234 when I search password stored its Nh2yEjhdHIwtY what kind of encryption is used? I thought it was crypt() , but when I create crpypt on my local machine its different.
View 3 Replies View RelatedI'm planning a fresh F13 install, with separate partitions for /boot, /home, /tmp, /, and swap. All but /boot will be logical volumes, and I'd like to encrypt all but boot. If I encrypt the underlying partitions, is there any reason to also encrypt the logical volumes themselves?
my system will be:
HP dv6-3040us Pavillion laptop
AMD Phenon II
4GB DDR3
Using sudo iwlist scan, i will get a list of surrounding AP(s) around my laptop, is there a way to interpret the sudo iwlist scan results so that we can know what encryption type is the wireless network using?
View 3 Replies View Relatedthere is one problem i encountered here while working with Embedded Artist board or Lpc 2478 uclinux.so my questions.what type of encryption does this uclinux use to encrypt the password?instead of using these 2 username and password,can i put my own password and username?
View 1 Replies View RelatedI Just got a Removable Hard drive! Now I need to format it because I need it to hold more then 4 GB file sizes. What format should i used. I'll only need compatibility with Other LINUX computers. So should i use NTFS, BTRFS, or EXT4? How would i take ownership of the backup drivers file system and not ROOTS permissions
View 5 Replies View RelatedHow to format partition (already exist partition Linux/any OS) during Installation using Linux OS installation CD/DVD?
View 2 Replies View RelatedUsing ubuntu minimal install 9.10 for a htpc. My boot drive is a 2Gb disk on module. When using advanced install I am eventually given the option to format the drive and ultimately the option to pick what sort of partition table type. I am not sure what to pick; it appears to have msdos as a default. Here are my options:
aix
amiga
bsd
dvh
gpt
mac
msdos (default?)
pc98
sun
loop
Some appear to be obviously bad choices; but I am not sure. Any ideas on which would be a better pick for me? I have already used msdos and it seems to work fine.
So, I just installed Ubuntu 9.10 in a different disk partition than where Windows 7 is currently installed. So, can I just go ahead and format the partition which contains Win7? Won't that compromise Ubuntu's integrity?
View 8 Replies View RelatedI have a Dell mini 9 with a 16GB SSD. At one time I had Hackintoshed it to run OS X. Went back to original OS(Ubuntu 8.04 LTS). Had some issues installing 8.04, apparently MBR was lost, or corrupted, so had to re-install grub and was able to complete the install. The issue is under partition ed. it shows dev/sda1 flagged as boot, with a yellow triangle, file system unknown, size 23.5 MB. When you double click the partition it shows status as unmounted, reason 1. file system damaged, 2. file system unknown to gparted, 3. no file system available (unformated). So I decided to try to formate the partition with ext2, or ext3 it fails with no detailed info. as to why it has failed. There is also no swap partition showing up? why this partition seems to be untouchable? When you right click the partition the options are delete, format, and manage flags. I am afraid to delete partition as this is flagged with boot, and cannot format.
View 9 Replies View RelatedRight now I have a windows xp on my computer. I have only C: drive. I want to first format to c:, and then make a partition, and then install windows xp, and then install slackware 12.2. How can I format, and then make partitions of my 80gb disc space?
View 2 Replies View RelatedI'm in the process of debugging and compiling about sixty FORTRAN 95 programs and could use a little bit of your help before my brain is fried and fingers are cramped. Thanks for your time!
I receive the following errors:
Here is my code:
I've recently starting dabbling with python and gtk/cairo bindings. Can anyone point me to a quick and easy way to convert a colour value from hex (e.g. #FF8000) into the format required by the set_source_rgb function?E.g. I have this:
Code:
cr=area.window.cairo_create()
cr.set_source_rgba(0.5,0.5,0,0.8)
[code]....
I'm trying to define the partition table type (I want to set it to msdos) for an automatic installation using preseeding file. (Why? I want to setup a software RAID 1 with two 2TB disks, by default the installer uses gpt partition tabless on those disks, where it's tricky to install grub(2), as there is no mbr, and the root partition is on a md device) During manual installtion it is possible to set the partition table type (by setting debconf priority to low).
[Code]...
Does anyone know what I have to put in my config file so that a msdos partition table will be created Also any other solution is welcome. I just want to have my root partition on a raid 1 and have grub installed, so that it boots up (No other OS is installed on the boxes. Debian squeeze is used)
I have presently a (working) boot dedicated partition, where grub stuff resides, but I want to change it to a common "/boot" folder in the root partition (in a different hdd). For some reason I can't do it. The first thing I did was to copy all the things that are in the boot partition to a boot folder on the root partition. After that, I tried: grub-install /dev/hdc1 (which is odd but it's where the root partition actually is)
When I did it from the linux I have installed on my hdd, it actually did something, I don't remember all the output (except that there was something about it not being able to access hda, which is oddly the dvdrom), but it didn't work. From a live CD, the same command (grub-install /dev/hdc1) is answered with: Could not find device for /boot: Not found or not a block device. From grub's own prompt, the things are more or less the same. First of all, it does not find stage1, even though I did copy the content from the boot partition to a boot folder in the root partition.
I tried to proceed, anyway, with root (hd1,0) and setup (hd1,0) (which is /dev/hdc1, according with the "geometry" info given by grub). "Root" is accepted, but "setup" is answered with: Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type But the files are there. I can't "cat" the menu.lst from grub though, unlike with the actual working boot partition. The same error message. From the terminal, however, it's all there. I tried with /dev/hdc1 both mounted and unmounted, the same message. So, basically I have two questions, I guess:
1 - can I really do this sort of thing running a linux installed on a hdd, rather than a live cd, or is the live cd preferable for some reason?
2 - what am I missing?
(A note that may worth making is that I'm using the soon-to-be deprecated grub version, 0.9 or something, not grub2. I think it shouldn't be a problem since I've installed the system with the old version to begin with, but that may be irrelevant, I don't really know)
This is my situation, I had installed Ubuntu in my whole drive in 640Gig. Now, I want to partition it, without affecting my Ubuntu operating system. I just want 320Gig for my Ubuntu and 320 for my Windows.
I know how partition using Windows but from Linux, that I don't know.
I have created live persistent usb-hdd (fat32) image, put into USB stick, but now I should create persistent live-rw partition. How this persistent partition should be formatted? Should I format with ext2, or fat32?
View 1 Replies View RelatedI have been using a kubuntu 10.10 till last week when it could not complete do-release-upgrade, so I downloaded kubuntu 11.04, specifying that I did not want my /home partition to be formatted, and went ahead with the installation. I used ext4 under 10.10 and selected ext4 again for 11.04, yet when I first rebooted after the completion of the installation, I could not find any of my files in that partition (except a newly created user home folder with the same user name as the old one). But when I looked at du -h, it's 92% full. I know I have set the mount point correctly, so it shouldn't be a fstab problem. What I should do to recover the files?
View 6 Replies View RelatedI just picked up a 1.5TB external drive. I want to wipe the NTFS partition (I assume that's what it is) that is there and replace it with an encrypted ext4 partition.
Is there a HOW-TO somewhere for this?
I got a new hard drive 2TB for extending the storage. I am working on fedora15 and would like to format the disk as a linux partition and external hard drive. me how to format this disk and partitioning!
View 12 Replies View RelatedI grabbed the new lubuntu 10.10 from [URL] but it turns out I'm having a problem installing it on my netbook (Asus Eee PC 1015PED). While installing, this error pops up:
Quote:
The attempt to mount a file system with type ext4 in SCSI2 (0,0,0), partition #1 (sda) at / failed.You may resume partitioning from the partitioning menu.I'm installing via USB and have selected the option to erase everything and use the full HDD.
Edit: I had Xubuntu installed before.
Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.
Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed
Iv'e tried over and over to get past this error to no avail.
I have a server with two hard disks SATA (500 GB), I installed centos in one of them, desire to know how I can mount the other hard disk empty and without format, so that this hard disk always appears mounted when "reboot" the system.
View 1 Replies View RelatedI have ripped quite a few movies onto my server and I play them on my PS3 with mediatomb. I haven't changed any of the settings in handbrake except I was playing around with the quality meter on the video tab. Some of my movies will play and others won't. The ones that do not play say something about an unsupported file type. They also will not play in Movie Player.
View 3 Replies View RelatedI had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.