General :: Dynamic Proxy For Apache Or Something Else?
May 11, 2011
just a quick question. I was wondering if it is possible to do the following: suppose there is a www and it contains 3 pages: aboutus.php, index.php and contactus.php within each side there are 3 other pages you could say 1*.php,2*.php,3*.php, where * stands for any of {aboutus,index,contactus}. I was wondering how, if it is possible, to implement the following mechanism.
If users requires 2a.php go to aboutus/2aboutus.php or if it is 1i.php then go to index/1index.php. What this does it translates addresses that user requires into the original links that are stored at the server. Then, if I want to change the translation I just change the naming convention say 22a.php or 11i.php and updates my mapping mechanism. Is it possible to implement it with mod_proxy_http ? so that you could dynamically (at once, without restarting apache and without any delays) change this mapping to whatever you want ? maybe there is another module I should look at ? Or shall I implement it myself?
View 2 Replies
ADVERTISEMENT
Apr 22, 2010
I have a problem with dynamic socks:
My VPS having this output of /sbin/ifconfig:
Code:
eth0 Link encap:Ethernet HWaddr 00:19:B9:B6:D2:3D
inet addr:x.y.114.13 Bcast:x.y.114.255 Mask:255.255.255.0
inet6 addr: abcd::xyz:fghj:ffgh:d23d/64 Scope:Link
[code]....
How can i use [x.y.101.1-3] address as proxy with putty?
View 1 Replies
View Related
Dec 12, 2009
I want to restrict the Visitors to my Webserver whom i want to give access But the persons whom i want to give access. have Dynamic IP. I want to use DynDNS and update IP address of person. Based on the Hostname Pointing to Dynamic address of person.
View 5 Replies
View Related
Jun 21, 2011
I have a question regarding the possibility of streaming video using an Apache web server configured as a reverse proxy. Suppose I have a local web server and areverse proxy that is abroad. I want users that are nearer the reverse proxy to be served by it and not my local web server. I know in general how to configure this and there is a lot of documentation. But can it be configured to support video file streaming without saving all the media content in the reverse proxy disk?
View 6 Replies
View Related
Jul 6, 2010
I wish to redirect http://spam.com/index.php?spam=cool to [url]
I've tried the following in .htaccess:
Code:
How doesn't this work?
View 7 Replies
View Related
Sep 3, 2009
OS :red hat 4.2 oracle EBS SUITE Applications:11.5.10
Iwould like to install Proxy(Apache) server on linux.is it possible?
I would like to trace the user activities by proxy server. we are running many applications on that.How to trace that.is there any server better than Apcache?
View 3 Replies
View Related
Oct 6, 2010
I've got some strange looking requests in my access_log which I don't much like the look of. Can someone take a look and let me know if 1) it's possible for other people to use my server as a proxy, and 2) how I can stop them.
Code:
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "GET http://vlad-tepes.bofh.it/proxy.txt HTTP/1.0" 404 1955
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "GET http://vlad-tepes.bofh.it/proxy.txt HTTP/1.0" 404 1955
85.190.0.3 - - [06/Oct/2010:14:32:55 +0100] "CONNECT 213.92.8.7:31204 HTTP/1.0" 200 1606
[Code]...
View 9 Replies
View Related
Oct 14, 2010
I dont know my question is right or wrong.I want to know can i use apache as a proxy .Is there any relation between apache and squid proxy.
View 1 Replies
View Related
May 26, 2010
I'm having some trouble getting Apache up and running as a reverse proxy for a site using SSL. Ideally, this Apache system will function as a web application firewall running mod_security, but first I need to get Apache running right. The system is running CentOS 5.5 and Apache 2.2. Trouble is, the web server on the back end, which is running Windows Web Server 2008 (IIS 7) requires SSL. I have been able to get Apache set up and running so that it works fine on port 80, but any secure traffic on port 443 just won't work.
So first, here's the relevant portion of the Apache config:
Code:
<VirtualHost 192.168.108.212:80>
ServerName www.server.com
ErrorLog logs/test_error_log
CustomLog logs/test_access_log common
ProxyPass / http://192.168.108.152/
ProxyPassReverse / http://192.168.108.152/
</VirtualHost>
<VirtualHost 192.168.108.212:443>
ServerName www.server.com
ErrorLog logs/test_error_log
CustomLog logs/test_access_log common
SSLProxyEngine On
SSLProxyMachineCertificateFile /etc/httpd/conf/server.pem
ProxyPass / https://192.168.108.152/
ProxyPassReverse / https://192.168.108.152/
</VirtualHost>
The server.pem was created following some steps I found online and was set up using the same certificate that's on the web server. It is formatted as so:
Code:
-----BEGIN CERTIFICATE-----
*****
-----END CERTIFICATE-----
-----BEGIN RSA PRIVATE KEY-----
*****
-----END RSA PRIVATE KEY-----
So, after all is said and done, Apache starts up just fine. Any unsecured requests on port 80 work just fine. Trying to use https results in an ssl_error_rx_record_too_long error in Firefox. The Apache logs show a 404 error, with the request being for /x16/x03/x01. I believe that means it's requesting SSL access on a non-ssl port, which doesn't make any sense to me, considering that I obviously do have something up on to listen on that port.
View 4 Replies
View Related
Oct 4, 2010
I have a question to masters of Apache. In my operating system (CentOS 5) I have installed two Apaches. One is Apache (port 80) from repository where I planning to configure proxy and second one is Apache integrated(port 8090) with KnowledgeTree software. The problem is that when I am trying to configure proxy reverse it simply doesn't work.
This is link to KnowledgeTree software:
- http://127.0.0.1:8090/knowledgeTree
This link I would like to rewrite with proxy like this:
https://myserver.com/knowledgeTree
(HTTPS dont forget)
In my ssl.conf in VirtualHost part I have created something like this:
Code:
<IfModule mod_proxy.c>
<Proxy *>
Order allow,deny
Allow from all
</Proxy>
ProxyRequests off
ProxyPass /knowledgeTree http://127.0.0.1:8090/knowledgeTree
ProxyPassReverse /knowledgeTree http://127.0.0.1:8090/knowledgeTree
<Location /knowledgeTree/>
ProxyPassReverse /
</Location>
</IfModule>
When I am trying to connect I see only: Unable to connect. Firefox can't establish a connection to the server at ifdocu.contaxt.biz:8090.
View 4 Replies
View Related
Mar 22, 2011
I am trying to configure a reverse proxy server that can act as a reverse proxy for ms sharepoint server that uses https. Usually when I accessed the sharepoint server at [URL], I will be prompted to enter active directory login. But what was "500 internal server error" and in error.log: failed to enable ssl support for 10.10.1.1 (sharepoint.mycompany)
View 2 Replies
View Related
Jun 1, 2010
I've read the documentation, but I'm still confused. I have two servers, one running Postfix and SquirrelMail, and another i want to setup a wiki(already setup) and Photo Gallery.On my Second server(2)I have two virutal webservers, wiki.rmasonfamily.info and photo.rmasonfamily.info, both running on port 80.My first computer is running my mail server again as a virtual server, mail.rmasonfamily.info. Default server is not used in either one.
Server 1 will be my proxy server, and if I understand correctly, my reverse proxy. Ubuntu had Apache set with a configuration in etc/apache2 using sites-available with configuration for each Virtual Server with sites-enabled with links to configuration files in sites-available. My Virtual Server in Server 2 are working fine, along with my mail server in Server 1. this is the code I assume I must use to bypass to wiki.rmasonfamily.info. In server 1, under sites-available, in the file wiki.rmasonfamily.info this is the code I put
<VirtualHost *:80>
ServerName wiki.rmasonfamily.info
ProxyRequests Off
ProxyPreserveHost On
[code]....
Doesn't work, I know I'm doing something wrong...
View 5 Replies
View Related
Apr 3, 2011
I'm having a problem with reverse proxy on apache. In the proxy I have a config like this:
<VirtualHost xxx.xxx.xxx.xxx:80>
RewriteEngine on
ServerName test2.mydomain.se
PROXYRequests Off
ProxyPass / http://app.otherdomain.se/
ProxyPassReverse / http://app.otherdomain.se
SecRuleEngine On
SecAuditEngine On
</VirtualHost>
When I try to reach the "[URl]" I get an error on a script in firebug.
GET [URL]
500 Internal Server Error
62ms
startp...tpassword (row 68)
document.getElementById(id) is null
[Stop by error] document.getElementById(id).innerHTML = result;
It seems to me that there is a problem with some XML stuff or something but I'm not sure about that.
View 3 Replies
View Related
Jan 6, 2010
Here my setup of Apache :
I have two virtual hosts on separate IP and on both I am using port :80 one is main website domain.name and another webmail.domain.name. And to get full link path I am using index.html with redirection derectives. My question how I can setup each Vhost to he is own redirection directive to set two full link like:
when type webmail.domainname -----> redirect to webmail.domainname/horde/imp/file.php
and www.domainname ------> redirect to www.domainname/csr/
Right now working only one of this Vhosts, just problem to separate them when I type www.domainname -----> apache redirect to webmail.domainname.
index.html
<html>
<head>
<title>WebSite</title>
<meta http-equiv="REFRESH" content="1;url=http://www.domainname/csr/"></HEAD>
<BODY>REDIRECTION</BODY>
</HTML> .....
View 8 Replies
View Related
Jul 9, 2011
I am trying to set up Apache and Webmin so that I can access Webmin by going to [URL]. I am using the direction at [URL] under the "Webmin In A Sub-Directory Via A Proxy" section. I had this setup working before, but I think an update of either Webmin or Apache broke it. Now, I can go the the webpage and I see the login screen. However, when I try to log in, I get an error.
Quote:
Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode I have tried adding the ProxyPassReverseCookieDomain and ProxyPassReverseCookiePath directives to my virtual host config file, but it still doesn't work.
Quote:
# webmin
ProxyPass /webmin/ http://localhost:10000/
ProxyPassReverse /webmin/ http://localhost:10000/
[code].....
View 1 Replies
View Related
Apr 14, 2010
I installed apache2 and mysql database on a Debian system. It is using reverse proxy on apache to redirect requests to apache2 running on any machine which is on Xen server as a Virtual host. I tried to install Drupal on it. Every thing went fine till I pointed my browser to:
http://IP[/url] of LAN where Drupal was installed/drupal
then I see an installation page of Drupal which welcomes me. I click install in English then it can not proceed to connect with database. Database configuration: Your web server does not appear to support any common database types. Check with your hosting provider to see if they offer any databases that Drupal supports.
I have created a database and username for Drupal separately. What should I check to. There is one more error
http://Public IP/some location/
Is showing me contents of Document Root but there is a folder named drupal on it. When I click on it I get error. Not Found. The requested URL /drupal/ was not found on this server. Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny8 with Suhosin-Patch proxy_html/3.0.0 Server at
What things should I check in for? I am also getting errors like:
- Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName on individual DomU's what should I check in. and on Dom0 when restarting apache2 I get following error.
- Reloading web server config: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
[Wed Apr 14 15:23:05 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
View 1 Replies
View Related
Mar 18, 2010
A Linux (CentOS5.3) server is setup with apache reverse proxy. The reverse proxy server is opened to outside and an internal server is mapped to ProxyPass configuration. SSL certificate is also installed on the Apache reverse proxy server. The problem is, it is extremely slow in serving http requests through reverse proxy. There is no problem with server resources or bandwidth. When the internal server is directly accessed through Internet, there is no delay. The backend server and the reverse proxy server are also on the same switch (same subnet). When I searched the Net, there were recommendations to enable cache in Apache. I did so as follows in httpd.conf.
<IfModule mod_disk_cache.c>
CacheEnable disk /
CacheRoot "/var/cache/mod_proxy"
CacheDirLevels 5
CacheDirLength 3
</IfModule>
But still there is no progress. Do I want to enable cache in ssl.conf too? Or is there any other workaround to speed up Apache reverse proxy. Is there a way to check that caching is happening?
View 4 Replies
View Related
Jul 23, 2010
I've been trying to figure out how to set up my Apache 2 running on Ubuntu 9.10 to provide a reverse proxy so I can see my wifi network camera monitoring my dogs and still have access to my family website. First, I followed the suggestions from this thread on Ubuntu forums: [URL]. I set up a similar rule set at the end of my /etc/apache2/sites-available/default, restarted apache -- from which I got a response saying that Apache2 could not determine the server name -- and then tried logging into my server through its ip address. When I tried http://192.168.2.80/dogCam, I just got a 404 error. Here's what I added: (I also tried my domain name, but it also didn't work.)
Code:
<VirtualHost 192.168.2.80:80>
ProxyPass /dogCam/ http://192.168.2.160/
ProxyPassReverse /dogCam/ http://192.168.2.160/
</VirtualHost>
When I looked at many other threads, I get recommendations to have my setup in httpd.conf. But, in both this server and a freshly installed Ubuntu laptop, my httpd.conf file is empty! I tried copying and pasting the recommended contents of the following thread, with the example proxy paths replaced with the ones I needed: [URL]. Straight-forward tutorials don't seem to apply, as Ubuntu has a blank httpd.conf file. I figured out that Ubuntu seems to load its modules by simply adding soft-links to the modules of interest from modules-enabled to modules-available. But, after a full day of trying to figure out what looks to be fairly simple and well-documented, I am at a loss for setting up this reverse proxy or even figuring out where to set ServerName to define my domain name to Apache2 in Ubuntu.
View 2 Replies
View Related
May 26, 2010
I am having a few websites running in a Reverse Proxy scenario on Ubuntu Server 10.04. The configuration is like this:
Code:
|--------------192.168.1.1
| (site1.abc.com)
|
|--------------192.168.1.2
| (site2.abc.com)
|
|
|
|
|--------------192.168.1.3
| (site3.abc.com)
|
|
|
|
|--------------192.168.1.4
| (site4.abc.com)
(Public IP ) |
A-------------------|
(reverse proxy server) |
(192.168.1.25) |
|--------------192.168.1.5
| (site5.abc.com)
|
Except one all websites are running properly and being redirected to their respective domains.
Following is the configuration which I used for each site define on server A a vhost file which contains following
Code:
# ProxyPass / http://<Ip of Server>
# ProxyPassReverse / http://<Ip of Server>
So if I have 5 websites then I have 5 vhost file on the gateway in above diagram A and in each of those file as above root of site is redirected to internal IP. 4 of them are running properly. The fifth website is running on port 8080:/keyword. So in its vhost file on gateway I defined
Code:
# ProxyPass / http://<Ip of Server>:8080/keyword
# ProxyPassReverse / http://<Ip of Server>:8080/keyword
I can see on Lan http://<Ip of Server>:8080/keyword but when from internet I try to see:
http://site5.abc.com
I get redirected to a page is https://site5.abc.com:8443/ and it says
Code:
The webpage at https://site5.abc.com:8443/ might be temporarily down or it may have moved permanently to a new web address. The site5.abc.com has a requirement to be run at port 8080 internally and it is not a Ubuntu server.(Red Hat based server). While rest all are Ubuntu servers including gateway A.
View 1 Replies
View Related
Jun 7, 2010
a reverse proxy scenario
Code:
Server A Server B (Zope Application)
Public IP 192.168.1.5
On the first one that is A in Apache vhost file I made
Code:
ProxyPass / http://192.168.1.5:8080/VirtualHostBase/http/192.168.1.5:8080/virtual_hosting/VirtualHostRoot/eduCommons
ProxyPassReverse / http://192.168.1.5:8080/VirtualHostBase/http/192.168.1.5:8080/virtual_hosting/VirtualHostRoot/eduCommons
but the CSS and images on internet which people are accessing are broken while it is running perfectly fine if I access on LAN.
Code:
[URL]
I have checked the documentation page and here also but still the problem persists.Also on LAN if the same is accessed like this
Code:
[URL] then CSS and Java script is broken. It is an eduCommons CMS. Which I am trying to access via internet.
View 1 Replies
View Related
Jan 26, 2011
Suppose I have a bunch of web servers running on my internal network:
And I have a dyndns account, I was wondering:
How can I do this?
View 2 Replies
View Related
Feb 27, 2010
I've been doing some security testing in a lab environment that does not have direct internet access. It's actually a little complicated: From home to connect to my lab machine, I
1. SSH to machineA.
2. SSH from machineA to machineB
where machineB is my actual lab machine. neither machineA or machineB allow anything other than SSH, and machineB is only accessible from machineA. However, I really need to run yum on machineB. I have managed to get internet access via Firefox on machineB by creating a series of SOCKS proxy via SSH.
1. machineB: ssh -L 12345:localhost:12345 user@machineA
2. machineA: ssh -D 12345 user@machineC
3. machineB: configure firefox to use socks proxy, localhost, 12345
where machineC has internet without limits placed. This is the only way I have managed to get internet working. I tried using ssh -L all the way from machineB->machineA->machineC but it didn't work (even when setting Firefox to use http proxy). I tried using ssh -D all the way, but again that doesn't work either.
I do have access via Firefox using socks proxy. However, yum update fails to retrieve mirror list, and from what I have found I don't believe yum supports socks proxy directly. Instead, it uses http_proxy / ftp_proxy. how to get yum to go out over the SOCKS proxy I created (same one using in Firefox)? It seems like since Firefox can access the internet and everything without issues, i should be able to get yum to tunnel through the same connection to access everything.... I tried
[URL]
View 1 Replies
View Related
Aug 17, 2010
is there a way to force wget to use a specific squid proxy when making connections ? - I use a squid proxy normally, but I need this specific request to go via a different one. I dont have to use wget, I just need a way to test squid's blocking rules by requesting various pages through it, this proxy is not my normally proxy on the network and so I cant rely on wget taking the environment variable.
Also, this is as part of a script, so anything that avoids editing wget config files would be best. - Perhaps curl can do this ? - currently im using the exit code of wget to determine if the connection was made.
View 1 Replies
View Related
Jul 25, 2011
I have comcast xfinity high speed dsl, with a dual boot win2000/opensuse 10.3 system. I'm connected in win2000, but I can't quite figure out how to configure comcast's dynamic ip address' in opensuse 10.3, either on command line, or in KDE with YAST (scream on the latter attempt).
I've looked up all man pages on ip cpnfig, but the problem is that my last internet connection was through a router with a static ip address, and I can't quite figure out the shell command from man pages ( I've tried dozens of combos like ip addr [change] {dynamic|on} etc. from what I could gather from man page instructions, but I can't seem to get the dev object and options worded just right), and I'm about ready to throw my monitor at the wall during every YAST attempt (and of course YAST doesn't pick up my dsl automatically and why it's asking for a comcast userid upon manual entry I haven't the slightest).
View 11 Replies
View Related
Jun 18, 2011
Here's an example:
What do the numbers after so, such as in the last line, 1.1.0 mean?
My first guess was that they are version numbers, but:
So the 1.1.0 does not seem to have any connection to the version of the library, reported to be 2.4.46.
View 1 Replies
View Related
Sep 15, 2011
I have a Dell Inspiron N5010 laptop that came with Windows 7 installed and a dynamic disk. I want to install Ubuntu but I have the following constraints:
I don't want to lose any data. I don't want to lose my current Windows installation. If I tried to make a system image it will be very large (about 40GB)
What are the available options?
View 1 Replies
View Related
Jan 13, 2010
I'm developing some small application runs on tomcat 6This web application just query data from MySQLBut I'm concern about performanceHow can I check how many request It can serve as well ?I'm thinking about to change the application to runs on httpd (will write in PHP)Normally, how many request httpd can handle for simple database query ?
View 5 Replies
View Related
Feb 4, 2011
I am trying to figure out how to make my terminal emulator dynamically transparent ( see through to the action below that window - Browser, video et cettera and not just the default wallpaper) . I figured out how to make transparent but not "dynamic". I have seen people mentioned you need to enable compositing but I am unsure how to do that in Gnome. I recall from a prior use of XFCE this was an option in that WM but I can't find in Gnome or compiz (if needed)
I am running Gnome on Debian Squeeze and have installed compiz. Any direction would be appreciated. I find reading web tutorials through the terminal to be very helpful so I can practice the command line or even practice commands while watching a good video .
View 3 Replies
View Related
Apr 4, 2011
I've created a script that put in dynamic variables the value HELLO 1, HELLO 2 HELLO 5. And I put the values of this variables in the file text.txt. Here's the script:
Code:
for i in $(seq 1 5); do eval ${i}=$(cat << EOF "HELLO" $i EOF); done
cat > text.txt << EOF
$1
$2
[Code]...
View 1 Replies
View Related
Feb 16, 2011
install a newly compiled linker as the default linker on my VM running Ubuntu. I compiled and installed a new custom kernel on my VM (linux-2.6.36) and also compiled (not install) a custom gnu c library (glibc-2.11.2) on the newly installed custom kernel. I am able to run a simple helloworld.c program to verify that my program worked successfully using the newly build dynamic linker in the /elf directory.
I want to replace the real linker inside /lib with the new linker that I compiled. I tried to make the soft link named ld-linux-x86-64.so.2 that originally points to the real linker file ld-2.11.1.so, point to my newly compiled linker, but my VM crashed. I also tried moving the compiled linker and wrote it over the original linker, and the VM crashed. None of the commands worked after that as they could not access any of the shared libraries and I received this error '/bin/bash: No such file or directory'. I also tried to change the LD_LIBRARY_PATH to point to my linker and did not have any luck there either.
View 2 Replies
View Related
