i don't understand this, why do you have to mount a usb or cd to use them? its such a hassle, in windows the usb/cd just works, but in linux you have to mount it, why? when ever i shutdown in linux, i am using ubuntu it says my drive didn't unmount on shutdown and it might damage my files?
View 2 Replies
I edited fstab file and added my hdd partitions to it. just wondering should i manually unmount my partitions everytime i shutdown or restart.
View 4 Replies View RelatedI have external hard drive which I used to connect via eSATA. I have edited fstab and it looks like that now: UUID=35C595D5738A319A /media/DATA ntfs auto,user,exec,suid,rw 0 0 The problem is that I can't unmount it as normal user, when do that, receive: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=35C595D5738A319A from /media/DATA
View 2 Replies View RelatedI have a SMB share being mounted during boot using a /etc/fstab entry.All that seems to work fine, but on shutdown or reboot I found that the system hangs for a variable period trying to unmount the share. It appears from the log that the unmount is happening after the network connections are closed.Is there someway around this, or is there some other way I should be mounting the share so that it is closes successfully at restart or shutdown?
View 1 Replies View RelatedI've had a look at some similar threads but as I'm very new to linux they're already a bit technical for me. Sorry, this calls for someone with patience. I gather from other threads that disconnecting an external drive without unmounting is a no-no, and this seems to be the likely cause. Now the disk is read only and I'm unable to change any settings through the usual control panel on ubuntu. I'm just not familiar with the terminal instructions. I tried to cut and past a few command lines from other threads but I got some warnings that proceding could damage data. Like this one: WARNING! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage.
View 5 Replies View RelatedI have pen-drive and hexEditor, I made my very simple boot sector and I want to boot it from pendrive. Firstly I have to format it, is setting all bits to 0 on pendrive dangerous? or are there any bits that are reserved and I should not touch them?
View 5 Replies View RelatedI am running Ubuntu 9.04 on a Dell Optiplex SX280 Yesterday the system locked up, and when I rebooted I got stuff like this:
Code:
[ 126.466459] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 126.466464] ata3.00: BMDMA stat 0x24
[ 126.466471] ata3.00: cmd 25/00:20:bf:a2:21/00:01:00:00:00/e0 tag 0 dma 147456 in
[ 126.466473] res 51/40:41:00:a3:21/40:00:00:00:00/e0 Emask 0x9 (media error)
[ 126.466476] ata3.00: status: { DRDY ERR }
[Code]...
extended my ubuntu partition with a free space that I had on my NTFS partition. It did get any problem. However, today I couldn't boot into ubuntu ( It was loading for about half an hour ). then I reboot and I got some GRUB error, so I boot into live cd to repair the grub but then unfortunately I found out that my Linux partition is damaged.I some how managed to repair it but the only folder that is there is "lost+found". also there is written 62.8 GB free space, but this should be 112GB (unless there are some hidden files that i can access to )
View 7 Replies View RelatedI run apache on a non standard port(82).I just installed unity to play around with it and while I was playing with it I installed prixfixe through software center to edit the menus.While prixfixe was installing my computer was acting very slow which was odd, but not completely unusual.During this time I ran ps aux which showed that my apache server was taking up most of the processing power.I was about to stop my web server,but I waited just in case the web server was updating a few things (I run ampache).
My computer finished installing the software and then I ran some command with sudo (I can't remember what the command was), but it threw back some message saying "setid blabla". I restarted my computer and when I got to my gdm my normal user account did not show up. There were no accounts and the restart/shutdown buttons didn't work.Now I'm running on a livecd and checking out my apache access logs, apache error logs,and kernel logs,but nothing looks out of place..
I'm running both Ubuntu 11.04 and Windows XP Home Edition. I have my hard drive partitioned with 90 GB for Windows and 60 GB for Ubuntu. Here's the problem: When I booted up Ubuntu for the first time, the Windows file system appeared as a second HDD. My dad told me that I need to make it so that drive doesn't appear or be read only or else he will be uninstalling Ubuntu because of the risk that some program will write to the Windows file system. I personally am not worried about that happening, but he clearly is. Remember, I'm brand new to Linux so please make things simple for me to under stand!
View 9 Replies View RelatedI've recently purchased a 4gb "ultra speed" flash drive. It reads and writes just fine on both my laptop and desktop. Both of which are running Ubuntu 9.04. However, when I go to unmount the drive from my desktop system, the drive icon on the desktop disappears, but it remains in the "media - File Browser".
There is one change in the file browser though. When I unmount the drive, the "eject" symbol disappears from next to the drive in the "media - File Browser" but the drive icon itself remains. The light never extinguishes on the USB drive, and when I click on the icon that remains in the File Browser, the USB drive mounts itself again and reappears on my desktop and the eject symbol reappears in the File Browser.This drive unmounts just fine from my laptop.
Code:
Bus 002 Device 002: ID 046d:0870 Logitech, Inc. QuickCam Express
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
[code]....
On a KDE4 environment after downloading some music from rapidshare with JDownloader the archives self-extracted with the symbol in some of the file names. Those files couldn't be renamed or deleted, the file manager said that the files didn't exist - very weird. The files should have had some swedish characters in their file names. Now I'm stuck with those files on my machine. Anyone knows how to get rid of them?
View 2 Replies View RelatedI have an external hard drive which connects to a usb port. until recently i could unmount it by right clicking on the desktop icon and selecting unmount. now when i try that it tells me that i can't because the device is not in fstab and i am not the root. i checked mtab and it had this line '/dev/sdb1 /media/usb0 msdos rw,noexec,nodev,nosuid 0 0' i changed that to '/dev/sdb1 /media/usb0 msdos user,rw,noexec,nodev,nosuid 0 0' thinking that would fix it, but it didn't. i unmounted using 'sudo umount /media/usb0' and restarted my computer and now the line in mtab reads '/dev/sdb1 /media/usb0 vfat rw,noexec,nodev,sync,noatime,nodiratime 0 0' and i still can't unmount without using the sudo umount command. i also tried adding '/dev/sdb1 /media/usb0 msdos user,rw,noexec,nodev,nosuid 0 0' to fstab and that didn't help
View 2 Replies View RelatedI have a 160GB drive installed as /dev/sdb. If I replace it with a 500GB drive, do I have to unmount/mount or will it work as is? This is on Ubuntu Server.
View 1 Replies View RelatedI am having this problem. I use an external usb hard drive with my pc running on ubuntu 11.04, If I keep the hard drive idle for a few minutes, ubuntu unmounts it. I suspect there are some options for this, so I looked into the Power Management section, but found nothing that can solve the problem.
View 1 Replies View RelatedI have thumb drive connected to a busybox box.I mounted it /opt in initialzation file. However after a while it will unmount itself because it changes its drive letter from sda1 to sdb1. How could a usb device change its drive letter by itself? How could I prevent it happening?
View 13 Replies View RelatedI accidentally unplugged my usb drive before unmounting it. In windows this is no big deal, so I'm used to that. However, I'm finding that in Kubuntu 10.04 this is a big deal. Now I can't mount any other drives unless I use the command line. Also, I can't unmount anything, even if I mount it on the command line.
What do i do? I know a reboot will fix this, but if it happens again i will be right back at this point. It should not take a full reboot just to unmount a drive. I have tried umount -l and umount -f and the terminal window just hangs.
I have external USB hard drive of 320GB(seagate sata).It works fine but, it unmount automatically after some time.In windows it works fine without any problem. also I unplug USB cable & plug it again to mount it is there any other way of mounting it after it gets unmounted.
View 1 Replies View RelatedUbuntu(9.10) does not let me the permission to mount/unmount any NTFS partition with a normal click . I have to do it by using sudo mount command like below every time.
"sudo mount /dev/sda6 /media/sda6"
and a similar command to Unmount When I try to mount using the normal click I get the following error message Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount /dev/sda6 from /media/sda6 And a similar error for mounting
This problem started when I used storage device manager(pysdm) to mount the drives I have the same problem with all the drives
I think my 4GB Cruzer flash drive has got a bit corrupted as it suddenly has started mounting at /_"[ instead of something along the lines of /45C1-8FE6 (can't remember the actual number). See the gparted screenshot attached.
So I thought I'd delete the partition, reformat and relabel... but gparted won't let me do it. When it tries to unmount, I get an error message:
Code:
Actually, I just figured it out whilst writing this. I used a umount command in terminal with escape characters, specifically:
Code:
That unmounted it so that I could reformat and relabel.
I am using a live-cd version of linux and want to install it to my hard-drive but when i try to unmount it and go into qtparted, it says it is still busy so i cant perform changes. This is my result when i type "mount"
Code:
aufs on / type aufs (rw)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
/proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
[code]....
I have Puppy installed on an old laptop and one way or another I ended up with a file inside /usr/bin that has the Stale NFS file error. I've tried to look around for a way to fix it but all places I've looked have only been for the situation where it's on a drive you're able to unmount. At least I think they were. I certainly don't know what I'm doing well enough to know for sure. Obviously restarting the computer has been tried as well as attempting to unmount things, but I can't unmount the drive that is running the unmounting.
View 3 Replies View RelatedI use a notebook for work and require a secure place for files in case of theft. I had dev/sda6 for that purpose and I mounted it only when needed and it was encrypted with password. Due to issues with file permissions, I had to re-install the OS. This time I do not have access to the dev/hda6 drive (owned as root) and get warnings when trying to unmount or encript it.
[code]...
I'm just curious - why do all linux distros (all I've seen) run their periodic disk checks during boot? I mean, I understand that a disk should be checked now and then, but why does the system do it during boot, when I'm waiting for it to load, instead of checking them during shutdown, when (most probably) user doesn't need the computer anymore.
View 5 Replies View RelatedI formatted the USB flash drive using Karmic's Format Disk utility (right-click on a volume, select "Format..."), and selected "Encrypted, compatible with Linux (FAT)" from the "Type" drop-down menu.It mounts correctly when I plug it in, and I can access the files just fine.When I unplug the Flash drive without using the 'Safely Remove Drive' option, the icon on my desktop changes its name to '2.0 GB Encrypted', instead of disappearing and unmounting like my unencrypted Flash drives do.
I would like to have encrypted Flash drive treated in the same way as my unencrypted Flash drives, which disappear and unmount when unplugged, even if the 'Remove Safely' menu option isn't used. What can I do to accomplish this?NOTES:When I plug the encrypted Flash drive in, the following line shows up in the output of 'mount'. 'secure' is the name I gave the disk during the format process:
Code:
/dev/mapper/devkit-disks-luks-uuid-302db16c-c6e2-4dd9-a259-436437c76475-uid1005 on /media/secure type vfat
[code]....
I have Seagate Freeagent Go 500GB external hard drive that I use for backup. I wanted to resize the partition so I used GParted to shrink the 500GB NTFS partition to 400GB. The other 100 I wanted to encrypt and use for some other more important files. For some reason, the shrink failed and I disconnected the hard drive and reconnected it. I didn't see the icon appear on the desktop. I went into the Disk Utility to discover that GParted's shrink error deleted all of the partitions on my hard drive. So I created a new 400GB NTFS partition and put back all of my files. The other 100 is unallocated currently.
It will normally mount automatically and show up on the desktop but the hard drive won't mount without me going into the Disk Utility and mounting it through there. I can't even mount it from the Terminal with root privileges. It gives me this:
Quote:
sudo mount /media/My Data
mount: can't find /media/My Data in /etc/fstab or /etc/mtab
Now, I can unmount with root privileges and I can unmount it from the Disk Utility. I can browse and edit the files within. But I can't unmount it from within Nautilus or on the desktop (the Safely Remove Drive option is not there).
The new 400GB partition also isn't detected by GParted. It just shows the whole drive as unallocated.
I am trying to mount an external USB hard drive. I'm using Debian Lenny 5. I tried to right-click on the hard drive and then select the mount command inside the gnome desktop environment but it gives me an error. Is there an easy way to mount and unmount this hard drive? The hard drive itself is formatted from the factory in NTFS. I'm going to leave it in this file format is a need to use it with Windows machines as well.
View 4 Replies View RelatedI succeed in uTorrent server's install as a daemon in Opensuse 11.4 and it works great. I've already change my fstab file to add a network drive to be mount on startup localize in /mnt/freebox/. This is also working great. The issue is during the startup, utorrent starts before fstab and thus the network drive is unmount.
In my utorrent init.d daemon script, I ask for $Network starts in first time: Code: Required-Start: $network Is there any possibilities to order the startup and ask to fstab to start before uTorrent Daemon?
I've been running Linux for a year on our family computers (one desktop, one laptop and two netbooks). I've run into a problem with the encrypted ext4 partition (270GB) on a LaCie external hard drive which also has a NTFS partition (50GB) which is not encrypted . First two times I tried using the encrypted ext4 partition (from two different computers) it worked fine but now I can't access it at all. I can still access the NTFS partition.Encrypted external hard drive partition will unlock but won't mount (or unmount). The computer says "Opening 320GB Hard Disk" but after a minute says, "Unable to mount location. DBus error org.freedesktop.DBus.Error.NoReply"Disk utility (GUI for gparted I believe) states that the encrypted partition (/dev/sdb1) is unlocked and the underlying partition (/dev/dm-0) is not mounted but it has a "busy circle sign" on it that will not turn off. The NTFS partition on the same drive mounts and accesses normally.
But if I try to unmount the NTFS partition, it says: "Unable to stop drive. One or more partitions are busy on /dev/sdb"If I try to shut down the computer, it is unable to shut down because (I assume) it can't shut down that drive either. So I have to just turn off the computer.fdisk states that /dev/dm-0 doesn't have a valid partition table [full output attached]fsck suggests: "Filesystem mounted or opened exclusively by another program?"ps axuf shows some processes running on /dev/dm-0 but killinghem doesn't release the drive either. [full output attached]I checked /etc/blkid.tab (suggested in one vaguely related thread) and there's no actual file only a broken link pointing to /dev/.blkid.tab (which doesn't exist). I tried deleting this link and rebooting but that didn't change anything.when I finally gave up my data as lost, I tried to format the partition (using Disk Utility) and it refused saying, "One or more block devices are holding /dev/sdb"
I have a build-in card-reader in my notebook. When I insert a sd-card the card is mounted but as soon as I start copying the files to the harddrive, the sd-card will unmount and than mount again. Every time I start copying I have the unmount followed by a new mount. I tried with different sd-cards and I have the same problem. Card reader works fine on windows. But now I don't have windows anymore on this notebook so I need to use the card-reader on opensuse.
View 9 Replies View Related
