I am having this problem. I use an external usb hard drive with my pc running on ubuntu 11.04, If I keep the hard drive idle for a few minutes, ubuntu unmounts it. I suspect there are some options for this, so I looked into the Power Management section, but found nothing that can solve the problem.
View 1 RepliesI have an external hard drive which connects to a usb port. until recently i could unmount it by right clicking on the desktop icon and selecting unmount. now when i try that it tells me that i can't because the device is not in fstab and i am not the root. i checked mtab and it had this line '/dev/sdb1 /media/usb0 msdos rw,noexec,nodev,nosuid 0 0' i changed that to '/dev/sdb1 /media/usb0 msdos user,rw,noexec,nodev,nosuid 0 0' thinking that would fix it, but it didn't. i unmounted using 'sudo umount /media/usb0' and restarted my computer and now the line in mtab reads '/dev/sdb1 /media/usb0 vfat rw,noexec,nodev,sync,noatime,nodiratime 0 0' and i still can't unmount without using the sudo umount command. i also tried adding '/dev/sdb1 /media/usb0 msdos user,rw,noexec,nodev,nosuid 0 0' to fstab and that didn't help
View 2 Replies View RelatedI have external USB hard drive of 320GB(seagate sata).It works fine but, it unmount automatically after some time.In windows it works fine without any problem. also I unplug USB cable & plug it again to mount it is there any other way of mounting it after it gets unmounted.
View 1 Replies View RelatedI am using a live-cd version of linux and want to install it to my hard-drive but when i try to unmount it and go into qtparted, it says it is still busy so i cant perform changes. This is my result when i type "mount"
Code:
aufs on / type aufs (rw)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
/proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
[code]....
I have Seagate Freeagent Go 500GB external hard drive that I use for backup. I wanted to resize the partition so I used GParted to shrink the 500GB NTFS partition to 400GB. The other 100 I wanted to encrypt and use for some other more important files. For some reason, the shrink failed and I disconnected the hard drive and reconnected it. I didn't see the icon appear on the desktop. I went into the Disk Utility to discover that GParted's shrink error deleted all of the partitions on my hard drive. So I created a new 400GB NTFS partition and put back all of my files. The other 100 is unallocated currently.
It will normally mount automatically and show up on the desktop but the hard drive won't mount without me going into the Disk Utility and mounting it through there. I can't even mount it from the Terminal with root privileges. It gives me this:
Quote:
sudo mount /media/My Data
mount: can't find /media/My Data in /etc/fstab or /etc/mtab
Now, I can unmount with root privileges and I can unmount it from the Disk Utility. I can browse and edit the files within. But I can't unmount it from within Nautilus or on the desktop (the Safely Remove Drive option is not there).
The new 400GB partition also isn't detected by GParted. It just shows the whole drive as unallocated.
I've been running Linux for a year on our family computers (one desktop, one laptop and two netbooks). I've run into a problem with the encrypted ext4 partition (270GB) on a LaCie external hard drive which also has a NTFS partition (50GB) which is not encrypted . First two times I tried using the encrypted ext4 partition (from two different computers) it worked fine but now I can't access it at all. I can still access the NTFS partition.Encrypted external hard drive partition will unlock but won't mount (or unmount). The computer says "Opening 320GB Hard Disk" but after a minute says, "Unable to mount location. DBus error org.freedesktop.DBus.Error.NoReply"Disk utility (GUI for gparted I believe) states that the encrypted partition (/dev/sdb1) is unlocked and the underlying partition (/dev/dm-0) is not mounted but it has a "busy circle sign" on it that will not turn off. The NTFS partition on the same drive mounts and accesses normally.
But if I try to unmount the NTFS partition, it says: "Unable to stop drive. One or more partitions are busy on /dev/sdb"If I try to shut down the computer, it is unable to shut down because (I assume) it can't shut down that drive either. So I have to just turn off the computer.fdisk states that /dev/dm-0 doesn't have a valid partition table [full output attached]fsck suggests: "Filesystem mounted or opened exclusively by another program?"ps axuf shows some processes running on /dev/dm-0 but killinghem doesn't release the drive either. [full output attached]I checked /etc/blkid.tab (suggested in one vaguely related thread) and there's no actual file only a broken link pointing to /dev/.blkid.tab (which doesn't exist). I tried deleting this link and rebooting but that didn't change anything.when I finally gave up my data as lost, I tried to format the partition (using Disk Utility) and it refused saying, "One or more block devices are holding /dev/sdb"
I am trying to mount an external USB hard drive. I'm using Debian Lenny 5. I tried to right-click on the hard drive and then select the mount command inside the gnome desktop environment but it gives me an error. Is there an easy way to mount and unmount this hard drive? The hard drive itself is formatted from the factory in NTFS. I'm going to leave it in this file format is a need to use it with Windows machines as well.
View 4 Replies View RelatedI have recently completed a fresh install of 10.4 LTS which installed without a hitch. But I have noticed that since I have moved to Lucid on my T43 the hard drive light is constant for at least 20 mins after each boot. Everything seems to run ok albeit during this time apps take a little longer to open as the HD is busy doing some thing...I just don't know what! BTW I am running the Gnome desktop and its a fairly vanilla install.
This didn't happen in the previous Ubuntu version I had installed on here for several months prior.
Does any one have any ideas what this may be or how I could find out what it is that is using the HD for this length of time on boot.
I'm running both Ubuntu 11.04 and Windows XP Home Edition. I have my hard drive partitioned with 90 GB for Windows and 60 GB for Ubuntu. Here's the problem: When I booted up Ubuntu for the first time, the Windows file system appeared as a second HDD. My dad told me that I need to make it so that drive doesn't appear or be read only or else he will be uninstalling Ubuntu because of the risk that some program will write to the Windows file system. I personally am not worried about that happening, but he clearly is. Remember, I'm brand new to Linux so please make things simple for me to under stand!
View 9 Replies View RelatedI've recently purchased a 4gb "ultra speed" flash drive. It reads and writes just fine on both my laptop and desktop. Both of which are running Ubuntu 9.04. However, when I go to unmount the drive from my desktop system, the drive icon on the desktop disappears, but it remains in the "media - File Browser".
There is one change in the file browser though. When I unmount the drive, the "eject" symbol disappears from next to the drive in the "media - File Browser" but the drive icon itself remains. The light never extinguishes on the USB drive, and when I click on the icon that remains in the File Browser, the USB drive mounts itself again and reappears on my desktop and the eject symbol reappears in the File Browser.This drive unmounts just fine from my laptop.
Code:
Bus 002 Device 002: ID 046d:0870 Logitech, Inc. QuickCam Express
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
[code]....
I have a 160GB drive installed as /dev/sdb. If I replace it with a 500GB drive, do I have to unmount/mount or will it work as is? This is on Ubuntu Server.
View 1 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedUbuntu(9.10) does not let me the permission to mount/unmount any NTFS partition with a normal click . I have to do it by using sudo mount command like below every time.
"sudo mount /dev/sda6 /media/sda6"
and a similar command to Unmount When I try to mount using the normal click I get the following error message Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount /dev/sda6 from /media/sda6 And a similar error for mounting
This problem started when I used storage device manager(pysdm) to mount the drives I have the same problem with all the drives
I think my 4GB Cruzer flash drive has got a bit corrupted as it suddenly has started mounting at /_"[ instead of something along the lines of /45C1-8FE6 (can't remember the actual number). See the gparted screenshot attached.
So I thought I'd delete the partition, reformat and relabel... but gparted won't let me do it. When it tries to unmount, I get an error message:
Code:
Actually, I just figured it out whilst writing this. I used a umount command in terminal with escape characters, specifically:
Code:
That unmounted it so that I could reformat and relabel.
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
I use a notebook for work and require a secure place for files in case of theft. I had dev/sda6 for that purpose and I mounted it only when needed and it was encrypted with password. Due to issues with file permissions, I had to re-install the OS. This time I do not have access to the dev/hda6 drive (owned as root) and get warnings when trying to unmount or encript it.
[code]...
I have thumb drive connected to a busybox box.I mounted it /opt in initialzation file. However after a while it will unmount itself because it changes its drive letter from sda1 to sdb1. How could a usb device change its drive letter by itself? How could I prevent it happening?
View 13 Replies View RelatedI have external hard drive which I used to connect via eSATA. I have edited fstab and it looks like that now: UUID=35C595D5738A319A /media/DATA ntfs auto,user,exec,suid,rw 0 0 The problem is that I can't unmount it as normal user, when do that, receive: Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount UUID=35C595D5738A319A from /media/DATA
View 2 Replies View RelatedI accidentally unplugged my usb drive before unmounting it. In windows this is no big deal, so I'm used to that. However, I'm finding that in Kubuntu 10.04 this is a big deal. Now I can't mount any other drives unless I use the command line. Also, I can't unmount anything, even if I mount it on the command line.
What do i do? I know a reboot will fix this, but if it happens again i will be right back at this point. It should not take a full reboot just to unmount a drive. I have tried umount -l and umount -f and the terminal window just hangs.
I formatted the USB flash drive using Karmic's Format Disk utility (right-click on a volume, select "Format..."), and selected "Encrypted, compatible with Linux (FAT)" from the "Type" drop-down menu.It mounts correctly when I plug it in, and I can access the files just fine.When I unplug the Flash drive without using the 'Safely Remove Drive' option, the icon on my desktop changes its name to '2.0 GB Encrypted', instead of disappearing and unmounting like my unencrypted Flash drives do.
I would like to have encrypted Flash drive treated in the same way as my unencrypted Flash drives, which disappear and unmount when unplugged, even if the 'Remove Safely' menu option isn't used. What can I do to accomplish this?NOTES:When I plug the encrypted Flash drive in, the following line shows up in the output of 'mount'. 'secure' is the name I gave the disk during the format process:
Code:
/dev/mapper/devkit-disks-luks-uuid-302db16c-c6e2-4dd9-a259-436437c76475-uid1005 on /media/secure type vfat
[code]....
I have Puppy installed on an old laptop and one way or another I ended up with a file inside /usr/bin that has the Stale NFS file error. I've tried to look around for a way to fix it but all places I've looked have only been for the situation where it's on a drive you're able to unmount. At least I think they were. I certainly don't know what I'm doing well enough to know for sure. Obviously restarting the computer has been tried as well as attempting to unmount things, but I can't unmount the drive that is running the unmounting.
View 3 Replies View RelatedTrying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedSometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies View RelatedI have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies View Relatedi don't understand this, why do you have to mount a usb or cd to use them? its such a hassle, in windows the usb/cd just works, but in linux you have to mount it, why? when ever i shutdown in linux, i am using ubuntu it says my drive didn't unmount on shutdown and it might damage my files?
View 2 Replies View RelatedI succeed in uTorrent server's install as a daemon in Opensuse 11.4 and it works great. I've already change my fstab file to add a network drive to be mount on startup localize in /mnt/freebox/. This is also working great. The issue is during the startup, utorrent starts before fstab and thus the network drive is unmount.
In my utorrent init.d daemon script, I ask for $Network starts in first time: Code: Required-Start: $network Is there any possibilities to order the startup and ask to fstab to start before uTorrent Daemon?
Having problems with external hard drives. I may be wrong, but I suspect they originated with an upgrade to 10.04 last Christmas. Around that time I also started using Amazon's S3 storage system, and, as a consequence, I stopped using my WD 80G external drive, previously used to backup my important files.
A week or so ago I decided to start using the WD drive again. I can't remember exactly what I did, but it wasn't happy - never caused any problems before. When I plug it in, the on-off light as the front keeps flashing on and off, and when I try to remove the drive I get the message: Error unmounting volumne An error occured while performing an operation on "My Book" (Partition 1 of WD 800BB External): The device is busy
Details: Cannot unmount because file system on device is busy Assuming the device had died - it's about 5 years old - I bought a 160G Samsung S-Series drive - my but they do look neat! Unfortunately, this doesn't seem to have solved my problem. I plugged the new drive in, and it happily appeared on my desktop. It seemed a good idea at the time, but I then started to format the drive - using the default option of FAT. All went well at first, but then the format process stopped.
My new Samsung drive now seems to be operating pretty much as the WD device, I can't copy to the drive, and attempts to unmount it generate a response similar to what's happening with the WD drive. Currently, although plugged in, I can't see the drive on my desktop, although it appears under Places. However, when I try to mount the drive, I get the message: Unable to mount SAMSUNG A job is pending on /dev/sdb1
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View Related