Ubuntu :: Partition Is Damage And Can't Accsess Files?
Jul 20, 2011
extended my ubuntu partition with a free space that I had on my NTFS partition. It did get any problem. However, today I couldn't boot into ubuntu ( It was loading for about half an hour ). then I reboot and I got some GRUB error, so I boot into live cd to repair the grub but then unfortunately I found out that my Linux partition is damaged.I some how managed to repair it but the only folder that is there is "lost+found". also there is written 62.8 GB free space, but this should be 112GB (unless there are some hidden files that i can access to )
View 7 Replies
ADVERTISEMENT
Jul 4, 2010
I know now: I overwrited the mbr with a totally wrong one, and I have no backup.So far as I can recall, I had two primary partitions; the first one for xp, and there were several logical volumes for linux in the second primary partition).None of these partitions are found now, grub reports "Error 22" with the wrong mbr.Can the mbr be corrected/recovered somehow, in a way that all of the original partitions show up again?
I think, the partitions themselves are not damaged, since only the mbr was overwritten.
I suppose a fixmbr command from the recovery console of the xp installation CD would fix the mbr and make the xp system in the first primary partition bootable. Am I right? How about the second primary partition; would fixmbr find that too? (Sorry for the silly questions, but I do not want to commit more mistakes, especially irreversible ones.)
View 8 Replies
View Related
May 8, 2011
I have ubuntu installed system with dual boot windows xp.I need to enlarge linux partition. I have a free disk in windows partation. I need to add some diskspaces to ubuntu part without any damage. I mean I would like to use my system as before.Windows and Ubuntu. Is there any free software that does?
View 3 Replies
View Related
Mar 21, 2010
I have a problem when trying mounting, checking my ext3 partition. Is a external HD with my "portable" Linux system. Suddenly started to fail, when I try to boot it, the GRUB can't locate the config file, and show me the command line. I boot from my internal HD and try to mount it and have this messages.
Code:
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] Unhandled sense code
sd 2:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 2:0:0:0: [sdb] Sense Key : Medium Error [current]
sd 2:0:0:0: [sdb] Add. Sense: Unrecovered read error
[Code]...
1.- What exactly is in this first sectors (ext3 metadata?)
2.- Is there some way to fix this quickly, maybe with some "sectors relocation", Or re-create the first logical sectors.
3.- If not, who could i make a full backup (something like dd copy), of all the partition.
4.- How fix it?, even with a long prosses, i don't know, maybe backup the file structure (with forensic tools) and copy into a new (and re-located) partition. This is my last option because the forensic tools sometime can't recover all files and sometimes only parts, or very old files.
View 7 Replies
View Related
Oct 1, 2010
i don't understand this, why do you have to mount a usb or cd to use them? its such a hassle, in windows the usb/cd just works, but in linux you have to mount it, why? when ever i shutdown in linux, i am using ubuntu it says my drive didn't unmount on shutdown and it might damage my files?
View 2 Replies
View Related
Jan 28, 2010
so I have a old (2000's) laptop which I installed Ubuntu over Windows XP. Now I need to get on the internet to update it and to be able to install things in general. It has a network jack, and a 10/100 PC card. When I plug a network cable into the network jack a whole lot of nothing happens. The person I got the laptop from says the PC card does not work, and said person also never gave me the dongle for the 10/100 PC card. I think the PC card may work, because I ran system testing and the report told me everything there is to know about the PC card. I would think if it didn't work, the computer wouldn't be able to see it. So here I am, with a network jack that doesn't work, and a PC card that may work, but I still cant plug anything into because I don't have it's cable.
View 5 Replies
View Related
Aug 18, 2011
KDE 4.6 - opensuse 11.4.
I have a separate ext4 partition which contains all my data (music, movies, etc). When I delete files from this partition it is very slow because it copies files from my data partition to the Trash folder in my home partition. How can I avoid this? Can't the trash be configured so that it uses a trash folder in each partition instead of copying files to another partition (which is slow).
View 9 Replies
View Related
Mar 17, 2010
I'm running Windows 7 on my desktop (But Ubuntu 9.10 on two laptops), and I have an odd problem.I backed up my system from one HDD to another HDD, and in the process the MBR of the destination drive got fouled up and now sees Windows Vista and Ubuntu (even though I never used anything Ubuntu - I assume the backup program used an ubuntu build).Is there any way No, I know there is. I had the answer once but lost it.HOW do I manually edit my MBR to remove the Ubuntu reference and rename Windows Vista to Windows 7? Please note Ubuntu was never dual booted, let alone installed at all, on the HDD in question.
View 2 Replies
View Related
Dec 20, 2009
I have dual-boot XP and Karmic.
I want to practice restoring the grub, before any emergency occurs
I plan to use the following thread: Grub/XP/Vista Bootloader - Ubuntu Forums
I would be grateful if someone could tell me an easy way to damage the grub. For example, re-installing XP always damages the grub, but I'm sure there are quicker ways to do the same thing
.
View 5 Replies
View Related
Feb 13, 2010
I was running a somewhat standard install of Ubuntu 9.10, when my drive got pushed into read-only mode,It took an hour or too, but eventually finished. However, now that partition is unbootable, and upon attempting to boot into Ubuntu, it complains about "libsepol.so.1" as missing and starts a recovery shell. In this recovery shell, only certain tools work. ls complains about "libacl.so.1", and the filesystem is still read-only. It completes, much quicker, but the system remains unbootable. I could probably boot into the Ubuntu live-cd to get read-write access, but I wouldn't know what to do.I don't know how I would go about reinstalling the base Ubuntu packages without write access to the hd, or through the live cd.
View 7 Replies
View Related
Aug 27, 2010
I'm dual booting Win7 & Ubuntu 10.04 on a Gateway NV78 series laptop, and while on the Windows side, the Gateway Update Manager asks to update my BIOS. If I allow it to do so, will it mess up Grub? For bonus points: how could I fix Grub if the BIOS updates does damage it?
View 6 Replies
View Related
Dec 28, 2010
I was in Ubuntu when I dropped my laptop, which resulted in a cracked screen. I loaded Windows (Vista), and found it and the files to be unharmed. On my attempt to load Ubuntu, it takes me to a GRUB screen, where it gives me a default message about GRUB. If I try the command "exit" it replies "No bootable device -- insert boot disk and press any key. It's installed on the same hard drive as Windows (dual boot setup), and Windows works fine. I do have files I would like to get off of Ubuntu (if it is unrecoverable),
View 7 Replies
View Related
Jul 18, 2011
<CPU Performance Indicator>
Can it damage a laptop in the long run to have it on Performance rather than a lower speed like "Ondemand" or "Powersave"? My laptop runs a lot better with "Performance" rather than something else, but I don't want it to suddenly die or get overheated in a couple of weeks or months.
View 2 Replies
View Related
Feb 13, 2010
I was running a somewhat standard install of Ubuntu 9.10, when my drive got pushed into read-only mode, so I switched to tty1, ran /etc/init.d/gdm stop, and then ran fsck -y /. It took an hour or too, but eventually finished. However, now that partition is unbootable, and upon attempting to boot into Ubuntu, it complains about libsepol.so.1 as missing and starts a recovery shell. In this recovery shell, only certain tools work. ls complains about libacl.so.1, and the filesystem is still read-only. When I try mount -rw /dev/sda1, it complains about libsepol.so.1 again. I can however still run fsck. I tried running it with fsck -p -f /, and it completes, much quicker, but the system remains unbootable. I could probably boot into the Ubuntu live-cd to get read-write access, but I wouldn't know what to do. I read an interesting suggestion here, but I don't know how I would go about reinstalling the base Ubuntu packages without write access to the hd, or through the live cd.
View 1 Replies
View Related
Feb 26, 2010
I feel a little awkward in this Control Panel: first time user. I installed the latest version of Ubuntu yesterday. All went smooth until I got to installing printer drivers. The setup went online and my system froze...everything froze. I had to do a hard reset. The printer installation went smooth the second time. So far this is the only problem I've had. No details needed. What I was wondering is if there's any way to check if the hard reset did any damage.
View 3 Replies
View Related
Mar 21, 2010
I have a P.C. with Windows XP Pro installed and now I want to put Ubuntu on the H.D. Will the partitioning of the H.D. damage the Windows OS meaning a reinstall of Windows. If it does then I may be a bit stuck as I do not have the Windows install disc. Windows XP was put on the machine by the vendor.
View 4 Replies
View Related
Sep 17, 2010
I installed Ubuntu 10.04 LTS currently. This is my first experience with Linux and it was installed together with Windows XP on my laptop, a Compaq nx6320 (HP). After first running Ubuntu and then Windows the MBR (Master Boot Record) on my hard drive was damaged and I couldn't start my computer again. All my information and work gone? MBR and Grub can of course be recreated and things don't need to be so bad. You maybe will reinstall Windows and Linux and destroy all your data..
I can temporary fix my system until the problems is solved. The latter will probably be a better Grub(2) that can protect it self from being destroyed by Windows or any other code that write data to MBR. From different forums I can see that many people already is very upset and disappointed with Ubuntu because of the actual problems. Can Ubuntu and its supporters afford this to go on much longer?
View 1 Replies
View Related
Dec 11, 2010
I booted up Ubuntu after a couple weeks of downtime. I think it had just installed updates before I shut it down. It seemed fine. I started updating it, then it started giving me a bunch of errors about the root file system being mounted read only, so I had to reboot. I've heard that it does that if the file system is corrupted or there is a hard disk failure. When I rebooted, it kernel panicked on all but the oldest kernel which did a fsck and rebooted. Then I was able to get back in, but most of my panel applets are gone and cannot be restored, it fails to start x at boot with no errors and I have to start it myself from the command line, it is unable to do updates, samba is gone, whenever I update-grub to add Gentoo to the list, it doesn't stay there and the computer is really slow. I have backed up my home folder to another partition. Do you think I will be able to repair it at all or should I just reinstall?
View 8 Replies
View Related
Jul 15, 2011
I have my home partition installed on a SD memory card, this memory card was damaged beyond recovery, already bought a new card but i dont want to install the OS all over again.
View 3 Replies
View Related
Mar 29, 2011
I have a new lenovo thinkserver hardware. I was configuring my newly installed kernel (slackware 13.1 - kernel 2.6.33.4) maybe to weeks now. I was testing the configuration of the kernel parameters.Suddenly out of the blue my BIOS started to report memory error. I have 6 Fully buffered memories in pairs. Four has no advanced ECC and two supports ECC.It is possible to damage the memory by some wrong kernel configuration???I cannot believe that this is possible but I cannot see any other explanation how can a two weeks old hardware get wrong.
View 6 Replies
View Related
Mar 9, 2011
My computer started acting flaky this afternoon and by the end of the day, became completely inoperable. When I reboot and login, I'm given only a Terminal window. I'm running Ubuntu 10.04 LTS, although the Lynx is not very Lucid at the moment!
1). First sign of trouble was yesterday when I was running Win XP as the guest on Virtualbox. XP became unresponsive - at least the mouse could not push any buttons. I had to do a cold shutdown by right-clicking the "close" button at the tab on the bottom Gnome panel. This problem repeated itself today.
2). I attempted (and I thought, succeeded) in upgrading OpenOffice.org to version 3.3. OO seemed to work fine, but after this install I started seeing problems.
3). I attempted to remove Pulse Audio via Synaptic, but instead of removing only Pulse, pieces of software started flying out of the machine (so to speak) at an alarming rate. It happened too fast to count them all. I think the entire desktop is gone along with many individual programs (such as Kaffeine, being one that I noticed).
Currently, I'm running a backup copy of Ubuntu that I keep on a separate hard drive on the same machine. I can access my files from here, and yes, I've backed up my home folder from the other disk!
When I reboot to the damaged system and I get the terminal window, how should I repair the damage? How do I find out if the damage resulted from broken or missing software, or both? Should I try to load Synaptic from the terminal, and if so, how is that done?
View 1 Replies
View Related
Jul 22, 2010
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
View 6 Replies
View Related
May 31, 2011
I got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
Partition table entries are not in disk order.
View 5 Replies
View Related
Jun 22, 2010
I would like to test alphas (of distros and packages), but without doing so from my everyday environment.Obviously, frequent backups are essential for maintaining important files.Apart from that, what other measures can I take to prevent catastrophic data loss?Could a well-designed partition structure the chances of an alpha blowing up data on other partitions?
View 8 Replies
View Related
Jan 14, 2016
I have pen-drive and hexEditor, I made my very simple boot sector and I want to boot it from pendrive. Firstly I have to format it, is setting all bits to 0 on pendrive dangerous? or are there any bits that are reserved and I should not touch them?
View 5 Replies
View Related
Mar 26, 2010
I am running Ubuntu 9.04 on a Dell Optiplex SX280 Yesterday the system locked up, and when I rebooted I got stuff like this:
Code:
[ 126.466459] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 126.466464] ata3.00: BMDMA stat 0x24
[ 126.466471] ata3.00: cmd 25/00:20:bf:a2:21/00:01:00:00:00/e0 tag 0 dma 147456 in
[ 126.466473] res 51/40:41:00:a3:21/40:00:00:00:00/e0 Emask 0x9 (media error)
[ 126.466476] ata3.00: status: { DRDY ERR }
[Code]...
View 4 Replies
View Related
Jul 28, 2011
I have squeeze with ext3 installed. Howto convert ext3 to ext4 without lost data or damage a running system?
View 3 Replies
View Related
Jun 20, 2010
System:
Fedora 12
Motherboard: ASUS A8V-XE (Socket 939)
CPU: AMD Athlon 64 3500+
Memory: DDR 400 184 pin (PSD1G400KM)--two sticks, 1 GB each
Much to my consternation, my video card blew a few capacitors. A local computer shop said that they tried a working PCI Express card, and the video was still not working, so they concluded the PCI Express slot was damaged as well. However, they also tried an older model video card that uses the PCI slots, and everything worked. So I ordered a new video PCI video card. It's on its way (Amazon). However, in the meantime I had a 1997-vintage video card sitting around, so when I got the computer back, I tried it. No signal to the monitor, not even motherboard booting beeps. Nothing. I called the shop back. He said even though my old card fit the PCI slot, new changes might have made it incompatible (16 vs. 32 bit, etc.). Anyway, even when I take the card out and boot, no beeps. That makes me wonder whether the old card did something, and now the motherboard is damaged beyond use. The man at the shop said the possible incompatibility of the old card should not have damaged the motherboard. Instead, he suggested that once a part of the motherboard is damaged (and we know the PCI Express slot is damaged), the motherboard as a whole can start acting erratically. However, it was beeping at the shop; now it is not.
I'm hoping those on this forum more knowledgeable about hardware than I am can give me some advice on the following questions.
(1) Does everything the shop did and said sound reasonable and likely?
(2) When my new PCI video card arrives from Amazon, if the computer still will not boot or even beep, does this prove I need a new motherboard?
(3) Is there any chance the motherboard could damage the new video card?
(4) Biggest issue: If I need a new motherboard, should I try to find one that accepts the same CPU and memory sticks? So far, I haven't been able to find one online. Or should I bite the bullet and get a new CPU and memory to match the new motherboard?
(5) If I get a new motherboard, new CPU, and new memory, can you suggest some possibilities of what I should look for? I don't want low-end, but for the work I do, I don't need really high-end, state-of-the-art either. I don't play computer games.
View 14 Replies
View Related
Mar 11, 2010
I am running CentOS with single hard-disk (no RAID). I frequently saw people lost data because of hard-disk damage or failure.I am wondering if there is a software for monitoring the hard-disk so that we would know in advance and do the backup because thing goes wrong.
View 5 Replies
View Related
Sep 24, 2010
After several times install & reinstall,i got a stable dual boot vista / ubuntu 10.10.,but i can't access or even see my windows partition from ubuntu,i installed my dual boot with wubu this time,in previous installation when i didn't use wubi , i didn't have such a problem & windows partition with all my files in it (windows files,media ,etc,) was easily accessible from "places" on ubuntu . I already disabled windows firewall & other security options but nothing changed
View 3 Replies
View Related
