General :: Don't Want Machine To Contact Dhcp?
Nov 25, 2010I have assigned static IP to my machine but, somehow, NIS entries are getting chenged due to /sbin/dhclient-script
[Code]...
ADVERTISEMENT
General :: Can't Contact Machine By Its Hostname
May 3, 2011I just upgraded to Ubuntu 11.0.4 (from 10). In my /etc/hostname file, I defined my machine's name, "my-machine". From the server, I'm able to SSH to myself,
ssh dave@my-machine
However, from another machine in the same network, I'm not able to SSH
Code:
davea-mbp2:systems davea$ ssh dave@my-machine
ssh: Could not resolve hostname my-machine: nodename nor servname provided, or not known
However, I'm able to SSH in using the machine's IP address. how I get my machine name recognized on the network?
General :: Two DHCP IP Assigned To A Single Machine?
Apr 16, 2010I just installed Fedora 13 on my ESX box.I have Fedora 13 Machine which was early having 1 network adapter.I added a new Interface type: e1000 to this VM.Now,My ifconfig says:
Code:
[root@fedora-13 ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:50:56:BA:00:15
inet6 addr: fe80::250:56ff:feba:15/64 Scope:Link
All i was trying to provide IP to eth0 and eth1 through dhcp.is it possible to provide two IP address to eth0 and eth1 both through DHCP.
General :: DHCP Server Inside A Virtual Machine Can't See Other Machines
Jun 2, 2010I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. I'm assuming I need to be able to connect to my next-server but maybe I'm wrong.
View 1 Replies View RelatedGeneral :: Fedora 7 Machine Browses Internet On DHCP / But Fails Completely On Static Address
Aug 3, 2010I am struggling with what might be a minor problem. I have a home computer which I would like to setup as a webserver and hence give it a static IP address. It is connected to by wire to a router that is connected to the WAN via PPPOE. If I enable the network card on DHCP it works fine in browsing the web. If I now set it to static IP address it does not brown. Essentially I use the command setup to run the static IP setup. I then set my IP address to 192.168.254.X , the subnet mask 255.255.255.0 and the default gateway to 192.168.254.1 (this is the router connected to the WAN). I am able to ping the router, however when I try and browse on static it does not work. Your help will be most appreciated as this has taken way too long to solve and I have Googled as much without success.
View 5 Replies View RelatedNetworking :: Use Multiple Dhcp Subnets On Single Machine?
Dec 13, 2010I am find myself in need of building what amounts to 3 ip networks on 1 physical lan.
first LAN is another companies network on the 10.0.0.0 network a mix of pc's and equipment
second is LAN new company network 192.168.168.0/24
third network is an ip phone system for both i would like to use 192.168.200.0/24
i am hoping to use the same dhcp server to do this, assigning address to the old company's 10. network via mac address reservation.
Networking :: DHCP To Assign Specific IP To A Particular MAC Address Of A Machine?
Feb 22, 2010I want to setup 1Gbps our lab network and we purchased 'Buffulo Giga layer switch ' with 24ports. Is there a way to tell DHCP to assign specific IP to a particular MAC address of a machine ? We want to use DHCP and whatever the port we use ,it should have same IP ..
View 1 Replies View RelatedNetworking :: Configure Dhcp Server - Ip Is Not Getting Assigned To Client Machine
Nov 1, 2010i hav configure dhcp server. but the ip is not getting assigned to my client machine.
View 3 Replies View RelatedGeneral :: Users Without Prior Contact With MS Windows?
Feb 3, 2010It was always why did You switch from there or that. I wonder are there (or better yet here actually) Linux users, that where never 'tainted' with the proprietary infamous operating system? I mean those who never *switched*, but had either both or saw Linux first (before MS Windows).
How do they perceive Linux? We , the ones coming from <put whatever You come from here> , are inevitably biased, carry a background noise and a "whistle" fading in our ears. I know computers from the days they came without operating system (just mere interpreters upon a BIOS stack) and really do appreciate the ways of *NIX. But I see my kids growing and exploring all kinds of "solutions" and OS-es and they have mixed feelings:
1. They are not bothered if software "looks" alike if it is functional
2. They like certain features on either sides and miss where they lack
3. They, above all, appreciate functionality
4. They miss gaming support on Linux a lot (big names hesitating)
General :: Contact Admins - Remove The Thread
Jul 2, 2010remove the thread after some one tells me.
View 2 Replies View RelatedGeneral :: Export Contact List From 8GB Iphone( Jailbroken) To EeePC?
Jan 14, 2011I am looking to get an android phone, and was hoping there is an easy way to export my contact list from my jailbroken Iphone to my Eee PC.
View 1 Replies View RelatedGeneral :: Scripts Should Use An Informative User-agent String With Contact Information?
Jun 19, 2010After installing Slackware 13.1, I find that I am getting the message:scripts should use an informative user-agent string with contact informationwhen I access certain websites. Wiki pages, for example. This happens only with Konqueror. Any ideas as to what I might change to gain access to content,
View 1 Replies View RelatedOpenSUSE Install :: PXE / Dhcp / 11.2 - Preserve Dhcp Lease On Reinit Of Driver?
Feb 8, 2010first: PXE flawless bind to dhcp address but put next binding state to free second: when installer calls init script to reinit ethernet driver (e1000 (vmware)) binding fails 11.2 opensuse fail to reinit dhcp with log entry "no free leases" third: when manual set network install works how to preserve dhcp lease on reinit of driver?
View 1 Replies View RelatedUbuntu Networking :: DHCP Server No Longer Responses To DHCP Requests - Can't Ping Gateway
Oct 22, 2010Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Ubuntu Networking :: DHCP Server No Longer Responds To DHCP Requests - Can't Ping Gateway
Jul 1, 2010Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
Networking :: Configure A (openSUSE) Client To Dhcp To EBox DHCP Server - Lease An IP Address
Mar 25, 2010I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
General :: Transfer Files On A Machine With Ftp / Sftp And Scp Disabled Onto A Remote Machine?
Nov 30, 2010How do you transfer files on a Linux machine with ftp,sftp and scp disabled onto a remote machine
View 2 Replies View RelatedGeneral :: How To Configure Serial Port Of Virtual Machine With Host Machine?
Jul 29, 2009I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies View RelatedUbuntu Networking :: If DHCP Not Available - Fallback And Start DHCP Server?
Mar 8, 2010Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View RelatedUbuntu Servers :: DHCP Server And DHCP Client Simultaneously?
Aug 4, 2010I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies View RelatedGeneral :: Transform A File On 1st Machine With A Tool On 2nd Machine In One Line Over Ssh?
Jul 14, 2011I have some file tools on a mint machine that I would rather not install on my mac laptop. Mainly because of the vastness of apt-get and the low risk of installation failure. Anyway, every so often I have a file that I want to process in place using some remote tool. Both machines can ssh right in to each other so I was figuring there must be some script or tool out there that would allow me to type out something like remote [file] [tool & args] to send my file to the other machine, get it processed, then get it back.
View 4 Replies View RelatedGeneral :: Setup A Machine Running Drupal CMS On A Debian Machine?
Aug 13, 2010I'm know very little about Linux but decided to set up a machine running Drupal CMS on a Debian machine and it won't go. The folks at Drupal have tried to help but it seems the Debian OS won't do it's PHP thing for Drupal.
That means i'll have to start at the START I guess.
how to become a master of Linux if one is starting from ABC (I can add and subtract, that's what it feels like)
Ubuntu Servers :: DHCP And DHCP Client Simultaneously?
Oct 31, 2010I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices. My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server. One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network. However I have no idea how this could be setup.
View 2 Replies View RelatedGeneral :: Access Windows Machine Through System Machine?
Aug 3, 2010I'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies View RelatedGeneral :: Copy Files From Machine A To Machine B?
Mar 8, 2010How can i copy a files from Machine A to Machine B.Which is LAN connected
View 4 Replies View RelatedSoftware :: New Wget Run Will Contact DNS Again?
Jun 28, 2011If I have an address, say [URL], and I want to run n number of wgets on it. How can I do this? I'm curious for the reason of checking how wgets caches DNS. Turn off caching of DNS lookups. Normally, Wget remembers the IP addresses it looked up from DNS so it doesn't have to repeatedly contact the DNS server for the same (typically small) set of hosts it retrieves from. This cache exists in memory only; a new Wget run will contact DNS again.
The last part confuses me. "a new Wget run will contact DNS again." This means if I run a for-loop to call wget on an address, it will just make a new call to DNS every time. How do I avoid this?
General :: Use Dhcp Again To Get IP
May 15, 2010I had statically set my ip in Linux using:
sudo ifconfig eth0 192.168.blah.blah
Now I want it to go back to using DHCP to assign the IP. How do I do that?
This is what I see when I run dhclient
Internet Systems Consortium DHCP Client V3.1.2
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/eth0/08:00:27:9b:43:09
Sending on LPF/eth0/08:00:27:9b:43:09
Sending on Socket/fallback
DHCPREQUEST of 192.168.56.104 on eth0 to 255.255.255.255 port 67
Fedora :: Evolution F14: No Contact To Server?
Nov 10, 2010I am behind a funny firewall, so that may have something to do with this, but since the problem materialized upon update to F14, I am assuming that this has something to do with it as well. (Both connections are on the internal network, so should not invoke the firewall/proxy, so the firewall issue is probably a red herring.)Since the update, neither evolution-mapi nor evolution-exchange (over OWA) are able to access my email. Here is the error given when using evolution-mapi:
Code:
Unable to authenticate to Exchange MAPI server: file exchange-mapi-connection.c: line 359 (exchange_mapi_connection_new): assertion `profile != NULL' failed Please enter the MAPI
[code]....
Ubuntu :: How To Add Contact (from Email) To Evolution
Feb 3, 2010How do I add a emailed contact to evolution? I tried clicking on from but theres no option to add as a contact.
I'm trying really hard to use a desktop email client, but it seems that a Web is better
Ubuntu :: How To See Offline Contact Emesene
Jan 15, 2011want to see my offline contacts to be able to send them offline messages in emesene but i don't find the option in preferences
View 5 Replies View Related