I bought a 3 TB western digital but I cannot format it. I have to split into 2TB and 1TB (or less because it holds 2.73 TB actually). Is that normal because of linux does not support 3tb yet? I note that I tried into EXT4 and JFS (after tabel creating)
View 1 RepliesI've been asked to move data from an old external hard drive to a new one, and to make the new one compatible with the Macintosh. (The old drive's USB connection has died, and I'm connecting to old the drive using a PC card that provieds an eSATA to the drive. The recipient's Macintosh doesn't have a PC card slot, so she can't access the old drive anymore. Hence, the new drive.)
Naturally, I'm doing this data transfer using Linux. I've discovered that I can format the drive as HFS+ using mkfs.hfsplus from the hfsprogs package. But I need to know: do I need to do anything special with the partition table? Is there a special Macintosh partition table format that I need to format this disk to? If so, what tools can I use to get the right format for the partition table?
I have a computer that was given to me and is no longer booting up properly. It's an Acer with VISTA installed. I would like to format the hard drive and start over with Linux. I don't have the original windows vista disk, I don't believe the computer even came with one, and no back up disks. Apparently this is the only way to format VISTA. When I am in the command prompt here is what happens.
C:> format c:
The type of the file system is NTFS.
Enter correct volume lable for drive C:
I don't know the correct label.
Searching on the forums I found this.
format c:/fs:NTFS/p:/
That doesn't work. I get this:
"Invalid parameter - /p:"
I have installed fedora 14 xfce.
However, I want to totally format the hard disk so I have no operating systems left on there.
I have created a usb boot disk for installing windows.
So I want to re-format the whole hard disk. Then boot up with the usb and install windows. Once I have done that. Then use the rest of the hard disk to install Fedora 14 from my other usb.
However, I am not sure how to completely format the hard disk. I want to start from a clean disk.
I am definitely non-techy, non-geeky, a GUI guy really, but learning steadily - I have been using Linux for a while now, have just moved on to Ubuntu and find it really great to use - I now feel confident enough to have just Ubuntu Linux on my Sony Vaio laptop (at the moment I have dual boot with Windows XP)
however there are just a few Windows programs that I need to use that will not run under Wine
so I would value comments/advice on my 'grand plan'
1) re-format the Windows partition so that Ubuntu can use the entire hard disk (I don't know the best way to acheive this - is it to reinstall Ubuntu using all available disk space? or is it better to just format over the Windows partition and treat it as a second hard disk?)
2) install VirtualBox and use a version of Windows as a guest OS so I can use those Windows programs when I need to - I understand this is easier than having to reboot the computer to get access to Windows
What is the recommended method these days for command line partitioning and formatting for the Terabyte size hard disk.?
It was easy to keep up when your working or have access to hardware for re-purposing, but that has all dried up and my knowledge has been left behind. The problem(s) are with new, recent hardware
Following a crash from a now detectable faulty stick of RAMM, I've lost one of my data hard disks and my fiddling with replacement seems to leave various errors/warnings mainly about GPT not supported and this message is still present despite trying fdisk, cfdisk, gpart, gparted, and(?).
System is an ASUS mobo using SATA drives (root 500Gb: MBR+3 partitions;/, swap, /home), and two 2.4TB with single partitions.
I've recently installed openSUSE 11.3 with GNOME When I was working on desktop settings, it locked itself, and it doesn't accept password I set during installation. I know that password is right, because it worked in YaST.
How to solve this problem without loosing any files? I haven't done backup... Is it possible to reinstall system, without formatting hard disk, and loosing files?
I would like to ask if i plan using fedora 14 as my main OS (for server). How many Hard Disk that fedora 14 can support? Because i plan using 2TB x 6 Hard Disk. Does it support?
View 14 Replies View RelatedI've VirtualBox using Ubuntu 9.10i was wondering if Ubuntu can support usb via VBOXif yes, please i need steps to do so
View 1 Replies View RelatedI have a HP laptop which can support 1600x900. But after I install ubuntu 9.10 on it, it can only support up to 1280x700. My laptop has a Nvidia graphics card. And i am using GNOME as my desktop environment.
View 1 Replies View RelatedI am a ubuntu user and I tried to install ubuntu on my sister's netbook too. The problem is that the netbook has a broadcom wi-fi n that is not supported by linux for now because I searched for drivers and other stuff an I found that it is not supported. After that I tried to format the disk and reinstall windows 7 but the problem is that the installation procedure gives me this error: "windows cannot be installed on this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enable in the computer's bios menu."
I tried to do all the things that are described here: [URL] but it's still not working.
Obviously when I format the drive with ubuntu and I put it in the netbook it's not working, it stops at the logo and the only thing I can do is entering BIOS.
I formated the drive with a windows os and then the pc makes the boot from usb but the problem persit...I still can't install because of that error :"windows cannot be installed on this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enable in the computer's bios menu."
Before installing ubuntu the sistem had kaspersky antivirus and detected 1 Trojan, it could be that a virus destroyed the bootsect...I don't think so.
I have an command to read inputs from file2 and replace the content in file1. Issue is that the op is coming in a single line as gsub and split functions don't recognize new line characters.
Code:
awk 'NR==FNR{gsub(/input./,""); split($0,a," = ");b[a[1]]=a[2];next} {gsub(/@/,"");for (i in b) gsub(i,b[i])}1' $t2 $t3
This gives belwo op:
[Code]....
I'm looking for a way to force my PS1 variable to a certain number of chars.
It currently looks like:
$PS1="W $"
and I'm trying to keep the same number of characters regardless of the length of current folder name.
For example, both Documents and bin would be displayed as 10 character strings, keeping the left side of my terminal the same width all of the time.
I have a 4 Gb memory stick which used to have OpenSuse on it but I don't use OpenSuse and wanted to use the stick for something else - for backing up my Mozilla Thunderbird installation. I thought that by re-formatting the stick, using a file obtainable from the HP web site, in connection with installing Linux on a memory stick, that it would leave me with an empty one but it hasn't; there is still a lot of OpenSuse stuff on it. How can I "empty" it so that I can use it to transfer my Ubuntu Thunderbird to another computer which is also running Ubuntu. I was going to open a terminal and type:
sudo cp -avr /home/chris/.thunderbird/ /media/disk
I have already tried this but it didn't appear to work, so is this not the right way to go about it?
I have created one partition. Now I want to extend that partition without formatting it.
View 3 Replies View RelatedHow do I, in Ubuntu, determine what the formatting (e.g FAT etc.) of an SD card is?
View 2 Replies View RelatedI tried to format my harddisk (160 GB) with the following command
dd if=/dev/zero of=/dev/sda
After some 3 hours, following error came up:
dd: writing to '/dev/sda' : No space left on device
312581809+0 records in
312581808+0 records out
160041885696 bytes (160 GB) copied, 10708.3 s, 14.9 MB/s
I would like to change the formatting on my BASH prompt from this:
anon@machinename.domain.poo:~/some/very/annoying/long/path$
to something like this:
anon@machinename.domain.poo:~/some/very/annoying/long/path
$
The idea is that I would be able to type a reasonably long command on one line without it wrapping to the next line so quickly.
I installed openSuSE 11.3. By default, man pages blocks are justified (block-aligned). Example:
Code:
WARNING Improper use of this command may seriously damage your system,so read this manual carefully to understand how to use it correctly and prevent yourself from destroying your system. Instead, I would like all manual pages would be displayed left-aligned, like this:
Code:
WARNING Improper use of this command may seriously damage your system, so read this manual carefully to understand how to use it correctly and prevent yourself from destroying your system.
I definitely would not like to reformat all the manual pages one-by-one. but rather just changing sometnihg in some macro-definition file or something similar? .. Is it possible achieve that simply and quickly?
I have only known about Linux software for the past couple of weeks. I want to install Ubuntu 10.10 on an older desktop I have so I can become more familiar with it. I am average in knowladge about Windows OS and MS-DOS. I tried to install Ubuntu and I get an error message about the harddrive. The CD I am booting with will load on my other PC with Windows XP on it. I have only let it run on it long enough to verify that it is bootable.
I have made a floppy boot disc following the instructions on another Linux site about Ubuntu. I have also tried to boot my alternate PC with the floppy and it boots up. The harddrive on my working PC is a Maxtor 40gb formatted with NTFS file system. The harddrive in the older desktop is a Western Digital 80GB WD800LB-55DNA0.It worked fine with Windows XP on it. I also made a Western Digital DATA Lifeguard for DOS floppy and it boots with it.
I don't want sympathy, but merely explain what I'm up against. I'm 63 years old. I'm on medical and mental disability (Cognitive failure, the beginning of Alzheimer's). I used to be a good computer tech, but now, because of my memory problems, I don't remember how to do a lot of things with a computer.I'm seeking assistance (not 24/7 help or hand-holding)to help me reformat,partition, and set-up a dual-boot for both WIN 2000 Pro and Ubuntu Linux to operate programs where I can use my Amateur (Ham) Radio in digital modes (PSK-31, PSK-64, BPSK, cw, etc). I'm choosing NOT to run Ham Radio DeLuxe, as it's bloated with M$ "code" and could be hacked and messed with.
The hard drive is a Maxtor 80 gig (78 g formatted). I have another drive,a Western Digital 40 gig (37 g formatted) that I use for Windows as well, but mostly it contains Excel spreadsheets with Part 90 - Public Safety frequency information for the local (within 250 miles) from my home. It's a FAT 32 and I'd like the 80 gig to match that
How can I change the label of one partition on linux without formatting it.
It wll format the partition, and all content disappears.
I'm writing a script that gives me some pertinent info about my servers, and the last little piece I need to figure out is the process list. There are going to be non-technical people looking at the output of the script and I'm trying to make it as simple as possible.
Right now, if I do ps -ef | grep <process> | grep -v grep
It obviously shows me the process, but the problem is that there is 4 lines of info in front of the process. ie
root PID date time java -1024 -cp oh,my,god,there,is,so,much,data,it,carries,on,for,4,lines,I,want,to,shoot,myself,trying,to,read,it,f inally,in,the,end,there,is,a,space /here/is/the/process
I'd like the output to be something like this:
PID: #### Process: /here/is/the/process
I've thought about how I could take the output and use awk or sed but I know there is probably an easier way to do it with perl.
I have a 16GB memorystick which used to have a Linux partition. It therefore has two partitions; 2GB FAT32 and 14GB linux boot drive. The linux part stopped working, so I decided to reinstall it. But windows can't see that partition. I tried formatting the whole disk, but I can only format one partition (the FAT32). There seems to be no way to combine the two partitions into one big one, and there seems to be no way for windows to partition the large part of the memorystick to but Linux on it. In the windows partition manager, windows sees the large unused partition, and it let me delete it. But once I have deleted it, I'm not allowed to format it. Also I cannot delete or resize the small partition. I have a memorystick with two partitons. Windows only sees one of them, and won't let me use the other one. I would like to combine the two partitions so I can install Linux on the memory stick again.
View 3 Replies View RelatedI want to copy/paste some text to vim from gedit. The original text looks like this:
I start vim, press "i", then right click, paste, and get this:
How could i set vim to not to do this? How can I copy/paste my text so that I don't need to delete those unnecessary tabs?
I'm a big fan of the NSLU2-Linux project so I've been doing some developments for this platform for the last three years. In order for the end users to test my applications, I initially created an USB image with everything bundled into it. Then, they only had to download the image and decompress (dd) it into an USB pendrive with capacity equal or greater than 4 GB. The fact is that this has brought me lots of problems in the practice since my Web server hardly accepts long file transfers.
Moreover, flash spaces beyond 4GB are wasted. As result, I'm now considering a different approach as I don't know how to do it. Well, I've thought that I could maybe create an USB disk image only with the root file system partition. Then, the first time a script runs, it creates a home partition and formats it into the rest of the space available in the pendrive. There is maybe some command-line alternative to fdisk without having the user to interact during the format process... ??
How can I format a USB hard drive to ext3/ext4 or whatever file format and have full permission to read, write and execute all files afterwards? When using the command line (as ROOT of course) mkfs.ext3 /dev/sdb? Restricts the rights to ROOT as does the procedure gParted. The man mkfs did not help much. Configuring the fstab- file is a bit of a hassle, so it would be nice, if there was an option to set the permissions "correctly" right from the beginning. Setting Ubuntu (I'm using Ubuntu 9.10) up, so that it mounts USB devices not as ROOT as default but giving all users all permissions seems to be really complicated, as a guy from my local LUG told me.
View 10 Replies View RelatedI was using Win Xp ,and i installed Ubuntu ,I used to get an option to select windows or Ubuntu before,I formatted Windows and now am not able to find the grub menu where iI could select Ubuntu,.How to get the grub enabled?
View 3 Replies View RelatedIn vmware workstation 6/7 (using windows xp as host), how can I map virtual disk of my linux VM? When I try to map it, it maps but when I try to explore it, it gives me an error of formatting!
View 2 Replies View RelatedI hav a shell script that outputs few variables. i want to output them in a table format. any unix commands?
The output i need is: