General :: Deploy War File On Tomcat Server Remotely?
Aug 20, 2010I want to deploy war file on tomcat server remotly.
View 4 RepliesI want to deploy war file on tomcat server remotly.
View 4 Replieshow I can deploy a WAR file with a Tomcat that happens to be installed on a server. I divided it to different small questions but no strait answer so far.
These are the things I've done:
created a myapps folder inside the tomcat directory, and copied the WAR file there.
These are the questions:
1. I did not touch anything inside the Tomcat folder, anything need to be changed?.
2.How to start the Tomcat so that it can deploy th e WAR file?
I am trying to start remote tomcat server, it's not working as expected. I like to mansion that..I am able to stop tomcat server remotly. Below command i am using
ssh -t remoteserver sudo sh /opt/tomcat/6.0.29/apache-tomcat/bin/catalina.sh start
ssh -t remoteserver sudo sh /opt/tomcat/6.0.29/apache-tomcat/bin/startup.sh
Both are not working..when i run this script locally it's working file
same way when i run tomcat stop command it's working fine.
ssh -t remoteserver sudo sh /opt/tomcat/6.0.29/apache-tomcat/bin/catalina.sh stop
ssh -t remoteserver sudo sh /opt/tomcat/6.0.29/apache-tomcat/bin/shutdown.sh
I check log file also..when i am executing tomcat start there is no log entry in log file
Using CATALINA_BASE: /opt/tomcat/6.0.29/apache-tomcat-6.0.29
Using CATALINA_HOME: /opt/tomcat/6.0.29/apache-tomcat-6.0.29
[code]....
I need to deploy Windows Server 2008 R2 onto a server that is currently running Linux. Effectively, I want to restore a Windows disk image onto the Linux system hard disk.I don't have physical access to the machine, so I need to find a way to do everything remotely, using SSH (no KVM). And the Linux machine only has one hard disk - the one containing the OS. However, I might be able to create a partition in free space at the end of the hard disk to store the image (I might need some help with the Linux commands). Or perhaps the image file can be pulled via FTP.
I tried Acronis but was disappointed to find that it doesn't seem to allow me to overwrite the system partition (unlike the Windows version of Acronis, which is capable of doing this with a restart).
Will there be any issues installing and then subsequently running a Microsoft Windows Server 2008 R2 installation on a VirtualBox VM on a Linux host (Ubuntu 11.04 64-bit)? I require Windows Server 2008 R2 for a course I'm taking, and I dont have any systems to install/deploy it onto.
Host Machine Specs:
Ubuntu 11.04 64-bit
4GB RAM
350GB Disk Space
Nvidia Quadro system
I have a warfile at /home/myusername/webapps/website.war and the following on /etc/tomcat6/Catalina/localhost:
Code: <Context path="/ROOT" docBase="/home/myusername/webapps/website.war" /> It's not deploying, why?
i use CentOS5.4, i want to deploy VPS on my server. Which technology i can use: OpenVz or Xen?
View 2 Replies View RelatedI would like to know how to deploy an ACL (ACCESS CONTROL LIST) on Ubuntu 9.10 server, because "apt-get install acl" is not responding.
View 2 Replies View RelatedI need to copy file from my Windows XP system to remote Linux system.
Win location : c:1.txt
LInux location:/tmp
What should be the command?
EDITED: pscp is recognized and OK on my PC.I CAN connect with Putty to this remote Linux PC remote Linux name is s1,hostname is s1host
I tried transfer file with following command:
pscp C:1.txt s1@s1host:/tmp
Got:Fatal: Network error: Connection timed out
It's not clear,is command isn't ok?
i installed apache 2.2.15 in my system its working properly.... but i deployed some php files in /usr/local/apache2/htdocs ... i was not able to run that php files ..... if i run that php file in browser it shows content of that file... for an example i created one test.php file(it contains <?php echo "hello world" ?>) and put it in /usr/local/apache2/htdocs... if i run in browser using this [URL] its shows in browse like this <?php echo "hello world" ?>......
View 1 Replies View RelatedI want to access linux server remotely from windows. I precisely dont need GUI. Just want to work with vim editor. currently I am using ssh software and xmanger software.Running ssh software dosen't give the feel and speed. However xmanager is fine to work. Can somebody suggest me from where i can get free latest xmanager software or better then it.
View 11 Replies View RelatedWe have to install centos 5.5 in approx 60 servers and we want to have a server in which we can create an image of 1 server and deploy it on all other severs through pxe. Mainly all servers will be having raid 5 or raid 1 configured. So the utility should be having the raid support.
View 1 Replies View Relatedsuddenly ,I get a project to shutdown all xp's by a Linux server(RHEL5) using a single command.by net command i did that.but in this case i have to specify all the ip addresses manually .Is there any way that Linux server obtain the ip addresses automatically on a network and then shut down all the pc's
View 2 Replies View Relatedwe're about to migrate a set of workstations (ubuntu 10.04 LTS) to a new kerberos/LDAP setup. Basically, this requires the installation of some required deb packages and to copy some new .conf files over the original ones.We made a deb package having these "features":requires the needed other packages as dependenciesbacks up original conf filescopies the new conf files to the right places (i.e. /etc/krb5.conf,/etc/ldap.conf)The problem is: apt-get complains because the deb is "touching" files owned by other packages (kerberos, ldap, etc.). Therefore, the only way to skip this check is either to force apt-get to proceed or using the "replaces" directive in the deb control file, specifying the clashing packages. omething like this:
Code:
Package: <package-name>
Version: 0.9.9
[code]....
I have a server at home running as a file server and DHCP connected to a switch with a wireless AP in there as-well. with this setup I can access the files and do some configurations via SSH on the actual server anytime I'm able to get the wireless signal, now lately I felt the need to be able to do the same but this time over the internet. I've read somewhere already that I'm gonna need a router with port forwarding and NAT, then know the IP address of the server but my problem is once you start talking about routers then you need broadband connection which is something I don't have. Getting a router is not much of a problem but without ADSL like connection I guess its useless, what do I need to do?
View 7 Replies View Relatedhow to deploy fedora in wds..it for my last final project..
View 8 Replies View RelatedI can ssh to the server but it wont allow me edit files, even though I have basic text editors like gedit and notepad installed on my windows computer. Anyone have an idea what the problem is? (I get an error message like this-(gedit:23978): Gtk-WARNING **: cannot open display
View 3 Replies View Relatedhow would you automate install/upgrade to a package to 200 servers. and obviously not by going to each system physically.
Answer: NFS share , using perl script and rpm utility. But i have not done such kind of install/upgrade so my knowledge is limited.
but i want to know how would i do that on Redhat Enterprise or CentOS.
I am trying to deploy servlet into Jboss and while starting jboss server it showing some messages which says something like this Packages waiting for deployer and complete server start-up information.
View 4 Replies View RelatedCan anyone tell me in performance tunning of apache-tomcat and jboss application server?when I deploy some application in apache-tomcat the performance is say 100 users per second and incase of jboss it is even worst (35-40 users per second)i want to improve my performance 1000 uesrs per second..
View 1 Replies View RelatedI have a requirement of using a wildcard certificate for 5 subdomains running under apache httpd server and 1 subdomain under tomcat.Is there any possibility of using the single wildcard certificate both in tomcat and apache
View 3 Replies View RelatedI have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies View RelatedI am stuck with an issue related to domain hosting. Currently i have an application hosted in my own server using a static ip from a service provider. I got a domain name from another domain provider. Everything went in right way till when i click my url in browser using internet through another system. I am able to see my application when i use my ip address, where as when i use my domain name its not working.
[Code]....
I have used same Hardware and OS platfrom for web server benchmarking and i have used similar php and jsp scripts for Apache and Tomcat. For this testing i have used apache ab benchmarking toolFrom this statistics i would like to clarify the performances about Apache and Tomcat.
1. why Tomcat have taken too much of time to finish this 10 million requests to compare with Apache?
2. why this huge different for "Request per Second"?
3. To Tomcat i have increased multi thread level 300 and JVM memory usage upto 2048mb(but performances not increased), rather than these, is there any other performance tune-up settings for Tomcat?
4. from these statistics, can i come to the conclusion that apache is the best?
5.do u feel that ab tool favouring to Apache?
I'm configuring a web server using Apache and Tomcat. I use Apache 2 and various instances of Tomcat5 and Tomcat6..I try that Apache serves the static data and tomcat the dynamic (Apache receives all requests, sending tomcat only the dynamic)I see that Apache and Tomcat can be connected using http or ajp Can any tell me:
- What connector should I use: ajp, http,...?
- How can I say Apache to serve the static data and Tomcat the dynamic?Due to I have many instances of Tomcat, connectins http and https, https with client certificates, and due to the port configuration:
- Is there any way to configure Apache-tomcat without the use of ports in tomcat (a differect connector)?
I need to install apache tomcat on centos 5.3...How can i do it
View 4 Replies View Relatedwe have configured snv in our server but when we tried to access our svn folder from client its saying path not found error.This is because apache is mapped to tomcat so when we tried to access svn by default it looks to some other path and displaying path not found error.My question is how to restrict apache from forwarding its request to tomcat or else how to stop the tomcat service. I am using centos and i tried with /etc/init.d/tomcat5 stop but it is not getting stopped.
View 3 Replies View RelatedI have application (WAR format) deployed on tomcat 5.5. I am able to access application using: "http://my_server_hostname/application_base_directory_name/hello.do" for example. I do not want my users to remember or bookmark the full link "http://my_server_hostname/application_base_name/hello.do"). Is there a way that i could have tomcat host it like a website and i can directly get the index page open by simply typing a url (http://hostname) in the browser? if possible, i would like to do it using tomcat only (no httpd connectors or modules).
View 1 Replies View RelatedI am trying to setup Tomcat on CentOS 5.2,This is that ive done so far...Installed Apache, which works fine and I get the "Apache 2 Test Page powered by CentOS" Did this
yum install tomcat5 tomcat5-common-lib tomcat5-jasper tomcat5-jsp-2.0-api tomcat5-server-lib tomcat5-servlet-2.4-api
Does anyone know or recommend some software or a script to remotely power on a PC from standby to on, or even better from completely off?
I guess the completely OFF to ON is much more complicated - would probably require an extra piece of hardware(?)