I've set up an FTP server with vsFTPd, and I can connect when on the same machine that the server is running. However, when attempting to connect from another machine on the internet, or even on the same LAN, the connection always fails. Port forwarding on the router is enabled.
When attempting to connect over the internet via FileZilla, this is displayed:
Code:
i tried to connecting from a windows7 client to a linux server through vnc server.But its very slow , is there any alternative for vnc . i heard that samba can be used as a remote desktop tool if its true please reply with configuration details.
View 2 Replies View RelatedI began by first installing Unbuntu Server (this was yesterday evening). After configuring and reconfiguring and reinstallation, I finally got it installed the way I wanted, so I thought! Today, I decided to give Debian a try. Read many posts concerning its stability, etc. D/L and installed. No problem, First I was met with permission denied error when trying to perform a simple 'cp' command. Jumped back to the forum and searched found a solution type 'su and enter password that worked perfectly I type some things in the smb.conf file (according to other instructions) then return to my XP machine to try connecting again. I know this isn't exactly 'rocket scientist' stuff, but WTH is going on? When the login screen appears in XP, I provide the proper credentials and still can't connect!! Also, how can I grant myself permissions other than using 'su -'?
Trying to build a simple file server for home use. Nothing fancy, but honestly, I've installed Novell servers much simpler than this.
I have problem with the server,when i restart my server client is still running it is not able to connect to client.i want my client to connect to server after the server restart
View 3 Replies View RelatedI am a student in Information Technology . I have a question from the book of Mark g.Sobell . I could not find the answer for that .Why might you have a problem connecting to an FTP server in PORT mode?
View 1 Replies View RelatedI am having trouble connecting to VNC server from any machine in my house. The server is running fedora v14.
Previously I was able to connect when i had dsl, but i have since switched to cable and am having a problem
I checked the vnc error log and saw the below error. Note these are excerpts from the file
I have checked
1. VNC server is up and running
2. My username is in the vnc file
3. the port i am trying to connect to is open.
[Code]...
I use PuTTY to connect to an Ubuntu Server (VPS). I would like to use Tab-Completion when I'm working with the command line on Ubuntu Server... How can I configure it?
View 1 Replies View RelatedI am fresh out the box to linux I am using mysql for the 1st time also, my question is what is the correct command to run on a mysql command line to connect to remote server.
View 5 Replies View RelatedI have a client.conf in /etc/cups that points to a CUPS server. I don't have u/p access to this server. I also want to print to a local printer (USB), but I can't set it up - ALL attempts bring me back to the CUPS server password prompt. Is there some line I can add to the client.conf to allow me to use a local printer?
View 4 Replies View RelatedI start x0vncserver like that:
Code:
x0vncserver --PasswordFile=~/.vnc/passwd
But clients that are connected to me cannot see the cursor on my desktop. I have tried to play with options in clients (Vinagre and TigerVNC viewer) and server with no luck.
P.S. I cannot use standart Vino server because of its poor performance with Gnome3. P.P.S. My system is Fedora 15
I am not able to connect to remote server through secureCRT . my local team has said that server is working fine . but I am not able to connect it remotely . what more i can do to connect it to server
View 10 Replies View RelatedI'm using Postgresql 8.4.2-2. I'm trying to remote into my server securely. I figure I could do so with ssh. Apparently I figured correctly, as per, [URL] and [URL] I setup the ssh tunnel. ssh -L 5432:serverip:5432 Then I setup pgadmin3 to connect as follows:
host: localhost
port: 5432
user: postgres
maintenance db: postgres
And I receive the following error:
An error has occurred: Quote: An error has occurred: Error connecting to the server: server closed the connection unexpectedly This probably means the server terminated abnormally before or while processing the request.
I'm not sure what the problem is. I can connect with Code: psql from the cli after connecting to the terminal via ssh. So I know that I'm using the correct password.
I want to connect to my debian server through putty, but only i got is the message - Network error: connection refused. I try with different setting on the server and in putty, but there is no effect.
Here are my settings: for the serveer i use [URL]
Code:
Port 22
# listen address i changed to accept all addresses
ListenAddress 0.0.0.0
[code]....
i have no /etc/ssh/ssh_host_key file and try to comment it but with no success. All other lines at the config file was commented.
i am trying to run open-emr using these instructions: [URL] i get as far as step 3 where this screen never seems to connect to mysql:
Quote:
OpenEMR Setup
Step 3
Configuring OpenEMR...
Connecting to MySQL Server...
i think i have everything installed:
[Code].....
I am having problems connecting to my VNC server. The host machine is running fedora core 15.
In the past I have been able to connect to the machine, but for some I no longer can't.
I have done the following but still am unsure what problem is
1. Verfied the VNC server is running
2. Verified my user "trb" is in the vnc users list
3. I have checked that my port is open (at least i think). i launched a terminal and did "telnet 127.0.0.1 5902" and successfully connected.
My vncservers config file which is located in /etc/sysconfig/vncservers
Code:
Here is the log file from my latest connection attempt.
Code:
I wanted to set up a secure FTP server with proftpd so I can put some large files on the web for my pops. Here is my problem, I use a clearwire modem that won't allow you to change any of the settings but appears to have some pre-set firewalling capabilities. I also have a linksys wireless router connected to the modem. That firewall has all the port forwarding settings ready to go, and there hasn't been an issue with anything else, so here it goes.
I have a properly configured secure FTP setup with proftpd and the client app I'm using is Filezilla. I know it is configured right because I was able to use the FTP server via my LAN. Maybe my logic is wrong but, I was connecting to the FTP server at it's IP on the LAN of 192.168.1.5:21. If I wanted my pops to connect from out of state I would give him the ip the internet sees when I surf the web, right? Looks something like this 68.44.22.113. I should tell him to configure Filezilla to connect to 68.44.22.113:21. If my logic is wrong, please let me know, because when I try to do this I get an error that says connection refused by host.
just now i installed telnet on my VPS. but while connecting to other server it gives error
# telnet 10.10.10.224 Trying 10.10.10.224... Connected to 10.10.10.224 (10.10.10.224). Escape character is '^]'. Connection closed by foreign host.
My next problem is: how in hell do you connect to a file server in Ubuntu???I have a plain little 1/2TB file server connected to my router. My Mac has no problems connecting to it.My Win 7 laptop has no trouble connecting to it. BUT... Ubuntu can't seem to find it at all. I have tried every bloody thing I can think of to tell it the server... name, Mac address, IP Address.
View 2 Replies View RelatedI have a CUPS server on Debian, I am trying to connect from an Ubuntu 8.04 box. Here is my CUPS configuration file on Debian just in case it is usefull:
Code:
LogLevel warning
SystemGroup lpadmin
# Allow remote access
Port 631
[code]....
When I try to add a printer I have set up in CUPS from my Ubuntu box, it asks for the password for katie (this is the user that is logged in on ubuntu box) on 192.168.1.200 (CUPS Debian Box). The problem is, I don't have a katie user set up on the debian box, am I supposed to for this to work. Why is it even prompting for a password? Also, it won't let me change the name so that I can authenticate with a different user, it is not in a text box.
directory and how to mount and all necessary commands.
View 1 Replies View Relatedi have two subnets with different gateways.i am thinking of connecting them via a linux server which would enable them to communicate.but i dont know how to proceed for getting this done.how should the connection be made and what should be the configuration settings on the linux server.
View 2 Replies View RelatedIm using ubuntu and i run a game server. Ever since i posted my server i have an IP address trying to join my game on a different port everytime, seems random and its nonstop for a week since its been up.
[INFO]/72.52.102.33:[random 5 digit port] lost connection NONstop
I port scanned them and i think its not a person but some service or server type buisness.
I use a linksys router, i couldnt find anything on blocking IP's at the router from the outside.
Is there anything i can do to stop them before the get to this server to login?
I need to build a small VPN server to connect one of my end VOIP devices out of the country, and am especially interested in a free or a limited Solution.
View 2 Replies View RelatedWell i have got a problem with connecting to a mysql database using php. I used this package "mysql-noinstall-5.1.44-win32.zip" and extracted it to c:mysql and added c:mysqlin to the PATH variable and used the following command in command prompt to start mysql: c:mysqlinmysqld --standalone
well mysql did start and everything went well accessing mysql in command prompt. Well under the database "mysql" in the table "user" i created a new user "php" with a password="****" and hostname = "localhost" but when i try to access this database with a following php routine:
And when i accesses it with my browser using localtost/test.php, all i get is "localhost" displayed on screen, "Connected to mysql" never gets displayed not i get any error..i am using windows 7(32-bit-ultimate)and mysql 5.1.44.
I went and generated a self signed SSL .pem file ($1000 for a signed wildcard ssl certificate is out of my price range at the moment). I can connect to my server on port 26 when using STARTTLS but not SSL/TLS mode. I would like to be able to connect to port 465 on SSL mode, but I have no idea how.
View 1 Replies View RelatedI have a Sun V120 server, and I connected to it via minicom from a linux machine. The problem is that when I connect, immeadiatly starts to receive the letter m as a command and it returns "Unrecognized command", so it is impossible to configure anything ot to give any command whatsoever. Also, sometimes receives all kind of letters, dots and characters, resulting the same and blocking my keyboard. When I connect from a Windows machine via HyperTerminal all is fine.
View 3 Replies View RelatedI need to reconfigure my php to have Sybase support. However, I am not sure which library to use. I'll try freetds but I am not sure if it will work. I used it before with Microsoft MSSQL.
View 3 Replies View RelatedI'm still learning my way around CentOS and linux in general... Using CentOS 5.4
BUT, I used the scripts from HowTo/Chroot Vsftpd and it did not work with the non-TLS script config, but the with TSL worked great. I wasn't sure where to put the vsftpd_virtualuser_config.tpl file but I copied it over when the script failed to find it... to where it was looking.
So I think it's working but my question is, TLS doesn't use port 21 but the script defaults to that port. I'm using FileZilla from an XP machine at work and I'm forwarding all the ports given in the HowTo. So I'm forcing the client to use TLS on port 21 but it hangs on the connection. If I use non TLS I get in but it tells me it requires TSL. I've had no luck with vsftpd in the past and this is my next attempt.
Quote:anon_world_readable_only=NO
anonymous_enable=NO
chroot_local_user=YES
guest_enable=NO
[Code]....
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedI connected two machines, I have their given of the addresses ip in a static way and not with DHCP. I gave to the machine server the address: 192.168.0.1, and in the machine client the address 192.168.0.2.
View 5 Replies View Related