General :: Best Training Centre For Vmware
Sep 27, 2010Can any one tell me the best training centre for vmware in bangalore.
View 1 Replies
ADVERTISEMENT
General :: Red Hat Training And Certification - Course Pre-requisites?
Mar 2, 2011Experienced sys admin with over 20 years experience of Solaris and HP-UX, but limited Red Hat knowledge.
I dont want to do the basic linux courses and spend days learning how to use vi etc.
I was thinking of jumping straight in and doign the RHCSA Rapid track course or even the RHCE Rapid Track course.
Of course, if I ask Red Hat they'd tell me I had to do the courses before this.
Unfortunately, funds are limited (personal training grant) so its one course only.
General :: VMware Snapshot With VMware Tools Loses Network On Restart - Host XP - Guest Fedora
Oct 3, 2010I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
General :: Access The VMWare Console From Firefox Using The VMWare Plugin
Aug 5, 2010I'm trying to access the VMWare console from firefox using the VMWare plugin. The problem is that it doesn't work on Firefox version 3.6.8. So how can I access the console?
View 2 Replies View RelatedUbuntu :: Application For ASSEMBLY Training?
Feb 8, 2011i am new to programming world and am trying to understand ARM core. I need an application to help me understand / train assembly language. If anyone knows a good application for this
View 9 Replies View RelatedNetworking :: Training Coarse In LDAP Integration?
Jul 9, 2009Has any taken and/or recommend a coarse in LDAP integration? I would love if I could make my labs a single sign-on.
View 4 Replies View RelatedServer :: SpamAsssassin Training No Longer Seems To Work?
Jul 26, 2010I keep training SpamAssassin with the spam that slips through, but don't see any improvement is spam detection. The details are these: Using ssh I trained SpamAssassin with examples of spam and ham I had saved for that purpose, perhaps 500 of each. I set up email recipes such that spam@example.com would go through sa-learn --spam --mbox, and ham@example.com would go through sa-learn --ham --mbox. Since then I have forwarded (as an attachment) any spam that slips through to spam@... and an equal amount of fresh ham to ham@...
That worked well for about a year. Spam in the inbox went from 150 per day to less than one per week on average, with no false positives. Naturally, spam blooms sometimes appeared, but training dealt with them.
I wrote up my spam setup in greater detail in these notes to myself:[URL].. For the past month or so, however, a steady stream of nearly identical spam has been getting through and despite training it all I see no change in spam scores on it. Here are relevant headers from a typical message:
(snip)
X-Spam-Status: No, hits=-6.6 required=3.5
tests=BAYES_00,RCVD_IN_DNSWL_MED,STOX_REPLY_TYPE autolearn=ham
version=3.002005
(snip)
X-AVES-Antispam: Maybe spam, 17.32 >= 4.00 [as:15.30 cc:0.00 hc:2.02
sa:17.32]
(snip)
Notice that a spam filter on an upstream server correctly flagged it, but my SpamAssassin. Nor does the score on these nearly identical messages seem to change with training. Another clue: previously my spam folder was receiving fresh spam every hour. Since this problem began the spam folder receives almost nothing.
Sure, it would be easy to cook up a procmail recipe to filter on the upstream server's "maybe spam" header, but I'd rather fix the underlying problem with SpamAssassin, not cover it up. Prior to coming here I searched the web, consulted my web host's knowledge base's articles on SpamAssassin, and read everything relevant at spamassassin.apache.org, but I remain stumped.
General :: Using The RHEL Server As Webserver And Database Centre?
Jul 12, 2011The issue is i am using the RHEL server as my webserver and database centre. Now its a brand new formatted server with good amount of RAM and the usage is not much. Its being accessed locally over the LAN. But still i can see speed deficiency. Some of the pages do not get loaded and some times i can see the delays in loading the new pages. Any idea y is it so? Or is there anything i can do to increase the speed?
View 3 Replies View RelatedGeneral :: Vmware Server 2.0.2 Installation On 12 - Making Sure Services For VMware Server Are Stopped
May 19, 2010I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed
The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".
Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".
I tried this command and find the this message
[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes
What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]
Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"
OpenSUSE :: Install Snow Leopard 10.6.6 VMware AMD Edition (which Downloaded) On VMware System?
Mar 17, 2011Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
View 1 Replies View RelatedDebian Installation :: Vmware Workstation 7.1.4 - Can't Complete Compile Modules Of Vmware
Jun 6, 2011I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
[Code].....
Ubuntu :: Open VMware Tools Aren't Detected By VMware Workstation
Jul 17, 2011I have installed the latest version of Ubuntu Linux (11.04) into latest VMware workstation (7.1.4 build-385536). I have tried to install the VMware tools ISO that came with VMware workstation but It didn't work and the installation seemed real sloppy anyways.
I installed the open VMware tools from synaptic within the guest linux and restarted, everything seemed to have been installed just fine but VMware Workstation doesn't detect it. I'm not sure if the tools are outdated, silent errors happened, or if any manual post installation steps need to be taken.
getting any form of VMware tools to run in Linux and detected by VMware Workstation.
Software :: Importing A Vmware Virtual Machine File Vi Vmware Server 2.0.2?
Jul 27, 2011I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
General :: Setup An "Authentication Password" For Ubuntu Software Centre?
Feb 18, 2010I am trying to download programs from the Ubuntu software Centre and keep being asked for an authentication password.The only passwords I have are for this site, default keyring and the terminal. How do I set up this password and where?
I have found the answer. It is my Terminal Password that is required to enter the Ubuntu Software centre.
Software :: Gnome - Vmware - When Trying To Browse - Open Vmware Images
Mar 28, 2009I am running an up to date Debian Lenny system with vmware 1.08 server installed.
When I run vmware, it appears to start normally. However, when I try to open a previously created image (from a different machine), everything is fine until I hit browse, which causes a screen to pop up that syas "The folder contents could not be displayed VFS error: Invlalid paramteres." and the following shows up on the command line:
Code:
OpenSUSE :: VMWare Workstation 7 Error "Before You Can Run Vmware, Several Modules Must Be Compiled And Loaded Into The Running Kernel"
Sep 21, 2010im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:
[Code]..
When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:
[Code]...
Ubuntu :: Software Centre In Lucid?
Jul 26, 2010is there any way of selecting several programmes for installation at once in the software centre, like in earlier versions of Ubuntu? I have to install about 150 things, and one by one is time-consuming!
View 6 Replies View RelatedUbuntu :: 10.04 Wheres Psx In The Software Centre?
Sep 7, 2010finally came across some rare ps games that i would like play on my laptop.
View 2 Replies View RelatedUbuntu :: How To Update The Software Centre
Mar 25, 2011I have Ubuntu 10.04 LTS - The Lucid Lynx installed on my main desktop machine that uses the 2.0.7 version of the Software Centre. Is there a way to update this to the 3.0.8 version that is on my laptop running 10.10 Maverik Meerkat?
View 14 Replies View RelatedGeneral :: Gmailwatcher - Doesn't Show As Installed Software In The Installed Software Centre
Nov 16, 2010I just want a simple email notifier. I have started to use Ubuntu 10.10 and seem to have downloaded Gmailwatcher - it shows in Applications/Internet/Gmailwatcher. But it doesn't show as installed software in the Installed Software Centre. So, I cant uninstall it. I can't configure it? If I try to open Gmailwatcher I receive a popup asking me to open it from an icon above - but there's no icon there, I just want a simple email notifier - preferably one which I can add an audio alert.
View 1 Replies View RelatedUbuntu Installation :: Can't Get Usb_modeswitch To Appear In Software Centre
Mar 12, 2010I am having a problem getting my Vodafone PAYG Huawei K3565 Rev 2 mobile broadband to be recognised and/or connect in 9.10
[URL]
The advice is to add
[URL]
to the apt sources. (replacing cz as required for several other servers of choice). I tried this (using several different servers) from within Ubuntu Software Centre, but the usb_modeswitch never appeared. In fact (oddly) the source never appeared in the list! (Although I did have a look in the etc/apt/sources.list and it had added a line each time - there were several - I'd tried quite a few!!!) I did try downloading it but when it starts gdebi to install, a message pops up saying it is available (and better supported!) in a software channel.
I searched round a bit and found another reference to the package at
[URL]
This time the sources were totally different and the apt line recommended was
deb [URL]
When I add this it does add the line to the list of sources, but sadly I still cannot see usb_modeswitch after Software Centre has updated. In fact the number of packages available seems to go down from 2186 to 2179!
I suppose I could force the debian package to install, but I don't see why I can't get it to appear in Software Centre!
I should perhaps add that I have added other sources using the "apt sources" and that worked OK so I know I am doing the right thing.
Ubuntu :: Print The Kde Centre Docbook Files?
Apr 23, 2010I have been looking at the docs in the KDE help centre, but I prefer to store some reading on paper to refer to when away from the computer. So. I don't seem to be able to print from the KDE Help Center, since it's greyed out. Anyone know how to somehow get the docbook files out to my printer instead?
View 1 Replies View RelatedUbuntu :: 10.04 LTS: Opera Not Available For Download In Software Centre
Sep 18, 2010installed Ubuntu 10.04 LTS a few months ago, and the Opera browser was available to download. I've just reinstalled 10.04, and Opera is no longer an option. All the other browsers are available ie. firefox, chrome, seamonkey. Was Opera removed from the list only recently?
View 2 Replies View RelatedUbuntu :: Get The Latest Version Of Software Centre In 10.04?
Dec 9, 2010I currently have version 2.0.7 installed. How do I get the latest version of software centre (3.0.7) or later on ubuntu 10.04?
View 4 Replies View RelatedUbuntu :: Disable Authentication For Software Centre?
Dec 20, 2010I am the only user.So i would like to disable authentication for software center and update manager which is being asked everytime when i install softwares/updates..How to acheive it?
View 5 Replies View RelatedUbuntu Installation :: Software Centre And Firefox Do Not Run?
Jan 6, 2011my problem is simple: the software centre and firefox do not run when i try to launch them from any icon or with Alt+F2. The "Window List" app in the bottom panel shows "Starting Ubuntu Soft..." or "Starting Mozilla Firefox" but that just disappears again after a few seconds and thats it (no error message whatsoever). I just installed Ubuntu 10.10 (new install - no upgrade) and it runs without problems on my other computer.
Ps: I managed to get firefox running with 'gksudo firefox' but not the software centre (i am not so good with all the commands yet ) and i dont want to have to do that alle the time
Ubuntu Installation :: Software Centre Won't Start?
Feb 19, 2011Tried to start Software Centre today in Ubuntu 10.04 Netbook Edition. It never started, showed the "starting software centre" message then stalled for a few moments and then nothing. "gksu software-center" in terminal returns this error;
Code:
dan@Viktor:~$ gksu software-center
Traceback (most recent call last):
File "/usr/bin/software-center", line 80, in <module>
app = SoftwareCenterApp(datadir, xapian_base_path)
[Code]...
Ubuntu :: No Install Button On Software Centre?
Apr 22, 2011This is utter nonsenseI need Sun Java Plugin because Iced Tea is low-quality garbage that doesnt work for all JAVA sites. and theres no install button, why is the install button disabled, WHY? Its not in synaptic package manager either.
View 3 Replies View RelatedUbuntu :: Software Centre Stopped Working?
Aug 5, 2011When I run Ubuntu Software Centre all I get now is one of two results:1. Ubuntu Software Centre starts up but with only a blank screen.2. Ubuntu Software Centre starts up but then seems to stall with a central circle icon whizzing around.either way, nothing else happens, i.e. it goes no further no matter how long I wait. I have logged out/back in and also restarted completely. No change.I have run synaptic package manager and reinstalled Ubuntu Software Centre. No change.
---
Ubuntu Software Centre 4.1.12~bzr2032~natty1
Ubuntu 11.04 Natty Narwhal
[code]....
Fedora Hardware :: Creative SB X-Fi Centre / Subwoofer Not Working
Aug 23, 2010I've been hunting for solutions to my soundcard troubles, but so far nothing seems to have resolved it.In a nutshell, I have a 5.1 speaker set up, but the centre and subwoofer speakers are not producing any sound under linux.My soundcard is a Creative SB X-Fi XtremeGamer.
View 6 Replies View Related