General :: What Filesystem On UCLinux
Jan 22, 2010I am using uClinux on ARM processor. How many & which filesytems are supported in uCLinux.I am aware that romfs is by default.
View 4 Replies
ADVERTISEMENT
General :: HOW Much RAM Will Be Used In UCLinux By Application
Jan 26, 2010My basic system will be working on uCLinux.There will be few applcations runnig on it.How will I come to know that my abc application will be using
1. x amount of RAM when executed ( Ofcourse that will depend on how many buffers I allocate in the application , but I cannot sit and count every declaration ).
2. y amuont of Stack bytes will be used while execution.
3. How much STACK should be allocated. ( I understand that for uCLinux application Stack size must be known before hand , how is that possible ?? ).
General :: Arm-uclinux-gcc: Crt1.o Not Found
May 14, 2011I recently installed the arm-uclinux toolchain from arm-uclinux-tools-base-gcc3.4.0-20040610.sh . I ran the script and tried to compile a test program:
/usr/local/arm-uclinux-tools/bin/arm-uclinux-gcc hello.c -o hello
/usr/local/arm-uclinux-tools/lib/gcc/arm-uclinux/3.4.0/../../../../arm-uclinux/bin/ld.real: crt1.o: No such file: No such file or directory collect2: ld returned 1 exit status
I searched for hours about this issue and found nothing, except a hint about uclibc not being installed. Isn't it compiled along with the toolchain?
I'm using Ubuntu 11 64 bit.
Hardware :: See USB Content In UCLINUX?
Jun 8, 2010If I connect a USB pendrive to the lpc2478 that runs uclinux, how can I see the content of this USB device?
View 2 Replies View RelatedSoftware :: What Type Of Encryption Does Uclinux Use To Encrypt Password?
Nov 11, 2010there is one problem i encountered here while working with Embedded Artist board or Lpc 2478 uclinux.so my questions.what type of encryption does this uclinux use to encrypt the password?instead of using these 2 username and password,can i put my own password and username?
View 1 Replies View RelatedGeneral :: Detect Filesystem Type (can't Mount Filesystem Image .img)
Mar 11, 2011I am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?
General :: External Drive Read Only - WARNING! Running E2fsck On A Mounted Filesystem May Cause SEVERE Filesystem Damage
Mar 24, 2010I've had a look at some similar threads but as I'm very new to linux they're already a bit technical for me. Sorry, this calls for someone with patience. I gather from other threads that disconnecting an external drive without unmounting is a no-no, and this seems to be the likely cause. Now the disk is read only and I'm unable to change any settings through the usual control panel on ubuntu. I'm just not familiar with the terminal instructions. I tried to cut and past a few command lines from other threads but I got some warnings that proceding could damage data. Like this one: WARNING! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage.
View 5 Replies View RelatedRed Hat / Fedora :: Filesystem Check After Power Outage - WARNING: "Running E2fsck On A Mounted Filesystem May Cause SEVERE Filesystem Damage"
May 18, 2011I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
OpenSUSE Install :: Unknown Filesystem Type 'reiserfs' Could Not Mount Root Filesystem - Exiting To /bin/sh
Mar 27, 2010When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
Ubuntu :: Finding Filesystem Type/repair Broken Filesystem?
Jul 9, 2010I have a following problem: Recently my drive with Ubuntu 9.4 has mysteriously stopped working, i.e. when I switch the computer on it informs me that GRUB didn't find the filesystem. Well, I suppose it happens.
First, I though it was due to the drive dying, but I popped it in an external enclosure and HDTune told me the drive was fine. Wanting to recover the files on the drive before reinstalling I first tried to mount it in said external enclosure under Windows (I have Win Ext2 driver installed which used to work just fine). This time, however, drive gets assigned a letter but upon opening it Windows popped up an error saying that the drive was not formatted and whether I would like to format it then.
Unfazed by this streak of failures I tried to mount it under Linux but, alas, to no avail. I might have tried every single -t operator under mount command but it still won't budge and let me mount.
General :: What Is Best Filesystem For SAN
Oct 1, 2010I would like to build a SAN with like 4 TB of space on it. What is the best way to accomplish this task?
- What exact hardware would I need.
- What exact software do I need.
- How to bond two Ethernet cards together to get better network performance out of the box
I am looking to find a cheap rack-mount server cabinet. What is the best file system for a SAN? Is there a particular distro that works well with this? I prefer CentOS as that's what I have been learning on.
General :: How To Repair Filesystem In Red Hat
Apr 19, 2010How to repair filesystem in Red Hat Linux version 5.0
View 1 Replies View RelatedGeneral :: Free Up Space In A FileSystem?
Feb 22, 2009The root partition on my server seems to be full. I'd like to find out what files are on that partition and only that partition so I can free up some space on it.
Filesystem Size Used Avail Use% Mounted on
/dev/hda5 7.8G 7.8G 0 100% /
/dev/hda8 84G 33G 47G 42% /home
/dev/hda6 996M 43M 902M 5% /tmp
[Code].....
So how do I find out what I can remove to free up some space?
General :: Copy Most Of A Filesystem Onto A New Drive?
Apr 6, 2011I am getting a SSD and I'd like it to become my new Linux boot drive. However, it is smaller than my current hard drive's root Linux partition, so I'd like to copy over the filesystem and exclude some directories (which I'll leave on another hard drive). So I can't just clone the partition with parted or similar because it is too big.
I want to make sure all the data, metadata, links and such are preserved. That seems to exclude "cp" because it doesn't preserve all the metadata and link information.
The two basic techniques I've been able to identify seem to be something like:
find / -xdev -print0 | cpio -pa0V /mnt/dst
and:
rsync -avP -H -S --numeric-ids / /mnt/dst
Can anyone chime in with what they've used in the past, whether one of these or a different method, or if they see any flaws in these approaches.
General :: Sync Filesystem In Background?
Aug 25, 2011While coding Python, I tend to save files very often (I have a pretty high code->test->code->test->... frequency). I hate when Linux syncs my changes to disk everytime I do a write.
How do I configure Linux so that it keeps file writes in memory for a certain period of time/number of writes?
To make this any useful, of course reads to not-yet-fsynced files must be from memory (so that the Python interpreter always sees the latest contents). Extra credits for background-fsyncing that doesn't block other writes/reads going on at the same time :-)
General :: Name Of Memory Filesystem Runs In?
Feb 7, 2011Once I deleted a log file and recreated it. After I did so the new log file was not being written to. I was told that it is because the file I deleted is still running and being used in memory. What is the memory portion called(such as user space) that the filesystem run in?
View 5 Replies View RelatedGeneral :: Extend The Lvm And The Filesystem To The Second Disk?
Dec 18, 2010I've added a second drive to a system and I need to extend the lvm and the filesystem to the second disk. Is there a way to do this online with centos 5.5? I specifically need extending the actual ext3 filesystem which seems to be the trick part.
View 8 Replies View RelatedGeneral :: What Are Appropriate Filesystem Options For Backups
Mar 12, 2011I have just purchased a 1 TB external hard disk to be used for backups. The backups will be performed with rsync and since I don't really care about accessing the data from other operating systems, I think I'll use ext3 on the partition. I'll just be backing up my home directory and probably /etc as well. In my home directory, I have a small number of files that are several GB, but most are tens of MB in size or less.
I'm just wondering if there are any special options I should pass when I create the filesystem with mkfs.ext3.
General :: Creating Jffs2 Filesystem For ARM?
Mar 26, 2010I have to create jffs2 filesystem for ARM.I have already created directories and nodes of devices as well as inittab script for ext2 filesystem. Now I don't know how to proceed from here. How to convert ext2 to jffs2. One more thing, is it necessary to create partition on hard drive on which one filesystem is already present to create one more new filesystem.
View 1 Replies View RelatedGeneral :: File Fragmentation Under Ext Filesystem?
Aug 11, 2011I heard that the ext file system does not causes file fragmentation. Could some one explain how this is achieved. And how come a file does not divides in to fragments as compared to Windows based Filesystems.
View 1 Replies View RelatedGeneral :: Filesystem Check Is Failed
Jan 23, 2010I have got arch Linux dual booting with Win XP on my laptop. I have been getting a filesystem check error since yesterday and am unable to start Arch. Upon googling and searching the arch fora, I came upon some advice which I tried which has not worked yet. Hence the new post.Basically, I was attempting to print something off and accidentally chose a printer that was not connected to my laptop. After half a minute or so, it repeatedly started giving me notifications that the printer was not connected...in excess of 200 messages that the printer was not working which continued to pop up despite me canceling the print job. The whole system got really sluggish (for the first time in the last year) and I had to restart the laptop upon which the boot messages appear. It gets to the point where its loading the various filesystems. It mounts root and says it fine.
I tried fsck which tells me that home and boot are still mounted.So I booted up using an Ubuntu Live CD and checked and repaired each file system which it successfully did. Upon rebooting into Arch, I am getting the same message.I have not installed anything new and had upgraded the whole system a few days before the problem started.
General :: How To Check Filesystem Type
Mar 28, 2011Code:
fsck from util-linux-ng 2.17.2
e2fsck 1.41.11 (14-Mar-2010)
/dev/sda1 is mounted.
WARNING!!! The filesystem is mounted. If you continue you ***WILL***
cause ***SEVERE*** filesystem damage.
Do you really want to continue (y/n)?
I don't want to cause damage, but I'd rather not go into BIOS.
General :: Use Cdfs Filesystem With Redhat 5.2?
Jan 6, 2011I want to know that how to use cdfs filesystem with redhat 5.2 i am unable to play a video cd in my system. this cd have .dat files. where i can download and install cdfs filesystem in my system.
View 2 Replies View RelatedGeneral :: How To Write To A Read-only Filesystem
Feb 19, 2011I have been given a headless linux system running from a SD card. I get into it by putty, directly to root, not other user and even /home dir. Whatever I copy or write will dissapear because is ro.
my etc/fstab file is:
none /dev/pts devpts gid=5,mode=620 0 0
none /proc proc defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/hda1 /boot vfatnoauto,rw 0 0
General :: Most Recoverable Filesystem For Backup?
Jul 13, 2011I want to backup a lot of files on an external 2TB USB and sit it in a cupboard for the next 10 years. Looking for the most reliable filesystem for this. I don't care about speed, journalling, UNIX permissions or any of that stuff. All I care about is in 10 years time when the hard disk plates are rusted and unreadable and the drive hardly functions, what filesystem will be the easiest to recover my data from. Not ruling out FAT32 either for its simplicity but maybe there's a better filesystem for the job?
View 12 Replies View RelatedGeneral :: Rsync 8 Different Filesystems Into One New Filesystem?
Dec 27, 2010I need to combine 6 different filesystems into one filesystem using rsync. I am so confused as to which parameters I need to use. The 6 fileystems are:
/mnt/tkpkgc1a/vol/mn_pkg_08_02/
/mnt/tkpkgc1a/vol/mn_pkg_08_01/
/mnt/tkpkgc1a/vol/mn_pkg_06_09/
[code]....
General :: Filesystem To Choose For NAS Box Based On OpenFiler
Feb 23, 2010I'm a photographer and I have a requirement find a better method of storing my photos other than multiple USB2 drives via USB hubs. Currently I use a Macbook Pro and 6 external drives connected via USB2 or FW800. 3 are a copy of the first three, kept up to day manually by running an rsync backup. I'd like to run a FreeNAS or OpenFiler NAS box using 2TB drives mirrored via software RAID. But - I would like to have the flexibility of also plugging into the drive physically for the faster throughput when necessary. My question is, is there a file system that both *nix and Mac OSX will play nice with?
View 2 Replies View RelatedGeneral :: Windows - Ubuntu: Filesystem Could Not Be Mounted?
Feb 26, 2010I run Windows Vista and Ubuntu 9.10 dual boot. Today while booting windows, it informed me that there was something wrong with my hard disk and it would perform a check, and made some fixes.
Only when I wanted to boot into ubuntu again did I realise that the disk check had corrupted my linux partition. Ubuntu's load screen shows up, but just before the login screen it says that the filesystem could not be mounted.
Is there a way I can fix this? And how do I prevent windows from doing the same in the future?
General :: Create A Filesystem Mountable By Windows?
Mar 5, 2010I have attached an external USB disk to my debian gnu/linux system. The disk showed up as device /dev/sdc, and I prepared it like this:created a single partition withfdisk /dev/sdc (and some more commands in the interactive session that follows)formatted the partition withmkfs.msdos /dev/sdc1If I then attach the USB disk to a Windows XP or Vista system, then no new drive becomes available. The disk and its partition show up fine in the disk managment tool under "computer management", but apparently the file system in the partition is not recognized.How do I create a FAT32 file system which can actually be used in windows?edit:I've given up on this and went with a NTFS file system created by windows. In debian lenny this can be mounted read-write but apparently it requires you to install the "ntfs-3g" package and explicitly pass the -t ntfs-3g option to the mount command.
View 2 Replies View RelatedGeneral :: Finding Out The Time A Filesystem Was Last Mounted
Jun 15, 2010I want to find out the last time a filesystem was mounted on Linux (Debian).
View 1 Replies View Related