General :: Arm-uclinux-gcc: Crt1.o Not Found
May 14, 2011
I recently installed the arm-uclinux toolchain from arm-uclinux-tools-base-gcc3.4.0-20040610.sh . I ran the script and tried to compile a test program:
/usr/local/arm-uclinux-tools/bin/arm-uclinux-gcc hello.c -o hello
/usr/local/arm-uclinux-tools/lib/gcc/arm-uclinux/3.4.0/../../../../arm-uclinux/bin/ld.real: crt1.o: No such file: No such file or directory collect2: ld returned 1 exit status
I searched for hours about this issue and found nothing, except a hint about uclibc not being installed. Isn't it compiled along with the toolchain?
I'm using Ubuntu 11 64 bit.
View 1 Replies
ADVERTISEMENT
Jan 26, 2010
My basic system will be working on uCLinux.There will be few applcations runnig on it.How will I come to know that my abc application will be using
1. x amount of RAM when executed ( Ofcourse that will depend on how many buffers I allocate in the application , but I cannot sit and count every declaration ).
2. y amuont of Stack bytes will be used while execution.
3. How much STACK should be allocated. ( I understand that for uCLinux application Stack size must be known before hand , how is that possible ?? ).
View 2 Replies
View Related
Jan 22, 2010
I am using uClinux on ARM processor. How many & which filesytems are supported in uCLinux.I am aware that romfs is by default.
View 4 Replies
View Related
Apr 13, 2011
I've having problems with my Makefile.
I'm trying to create a program from 2 files - main.cpp that contains the main function, and modules.c that contains the definitions of the functions that are called in main(). modules.c only contain function definitions, no main function.
My Makefile is as follows:
Code:
I have included "modules.h", which contains all the function declarations, in my main.cpp.
When I try to make using this Makefile, I get the error
Code:
If I switch the order of modules.o and main.o in my $(TARGET) line, then I get errors that say "undefined reference to" the functions I have defined in modules.c, in main.cpp.
View 4 Replies
View Related
Jun 8, 2010
If I connect a USB pendrive to the lpc2478 that runs uclinux, how can I see the content of this USB device?
View 2 Replies
View Related
Nov 11, 2010
there is one problem i encountered here while working with Embedded Artist board or Lpc 2478 uclinux.so my questions.what type of encryption does this uclinux use to encrypt the password?instead of using these 2 username and password,can i put my own password and username?
View 1 Replies
View Related
Oct 1, 2010
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
View 9 Replies
View Related
Mar 29, 2010
I have been trying to get this web cam working for a long time. lsusb:
Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg
Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
[Code]...
View 3 Replies
View Related
Jan 24, 2010
During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
View 3 Replies
View Related
May 11, 2011
I'm having problems with Common Shell Environment Variables. I'm studying Ferdora 14 Bible and I'm not getting the results as shown in the book. Please take a look at what I'm doing and let me know where I'm going wrong.
As you can see I start out as a User by the $ prompt, according to the book I should get the following information: /bin/bash. As you can see I get nothing, so I entered into SU mode and ran the same command and still I get no information,
This isn't the only variable I'm having problems with.
Have I done something wrong code...
View 4 Replies
View Related
Jul 14, 2010
ust installed Ubuntu and bought my first programming book.I installed Emacs and gcc, then I make the following steps:
Open a terminal
go to Emacs
write basic code (Hello World)
[code]....
View 8 Replies
View Related
Aug 3, 2011
I have debian Lenny 2.6.22.18 running on my LG-NAS N2R1 with tantalus firmware installed. For the past few weeks, I have been trying to get apple airprint working using avahi and cups. Today for some reason I tried to get into my samba shares and nothing was working, not even the webinterface of the nas. A reboot did not work either. To investigate, I looked to see if there was a problem on startup by issuing /etc/init.d/rcS start.The startup script ran and lots of things failed to start as they said they could not find or open libtalloc.so.1. I have checked /usr/lib and the file is indeed not there. Is there anywhere I can get this library from. I suspect that with all my tinkering I may have somehow deleted/moved it somewhere
View 1 Replies
View Related
Nov 25, 2010
I have installed Ubuntu 10.4 on Dell Precision 4300 . I have two DVDs .One is player that works okay, but the system does not recognize the other one ,which is MSI DVD writer. Those are both ATA connected on same line . I have tried to switch positions ..but the MSI writer is always hidden.
I can't see MSI on your hardware compatibility list. Is it not useable with Linux ?
View 1 Replies
View Related
Jun 24, 2010
I have a simple script. When I run it as cron job. I jot email saying:/bin/sh: line 1: test.tmp: command not found.Even I took first line out, I got the same error.The current shell I have is /bin/tcsh.
View 4 Replies
View Related
May 8, 2010
I occurred a really weired problem, which is touch : command not found.I was going to create a blank file, so I type the touch command which didn't work.I'm running centOS 5.
BTW: the vi command also not found.
View 3 Replies
View Related
Jul 27, 2010
I have a very strange problem with my wireless routers, or linux. I have 2 wireless routers one directly connected to my modem (router 1) and another wireless router (router 2) on the 2nd floor connected to router 1 without cables and configured as a repeater bridge. Router 1 is configured to broadcast the ssid and have been set up to use wpa-personal and router 2 has the same configuration as router 1 plus a virtual interface.
I am able to connect to both routers from all my windows boxes, but I fail to connect from linux (I have tried with 2 different laptops without luck). What is very strange is that I can't see the routers when I scan but I am able to see my neighbors routers. I have tried to turn off router 2 to see if it had an impact, but no luck. I know that I am able to connect to a wireless router since I have had success with that at work.Router 1 is a Siemens se551 (with default firmware) and router 2 is a linksys wrt54g (running DD-WRT build 13064).
View 1 Replies
View Related
Apr 23, 2011
I am trying to build a Makefie, i am getting an error. /bin/sh: line 4: autoheader: command not found.
View 1 Replies
View Related
Feb 15, 2010
i was trying to install windows xp on vbox, but the cd wont work, so i want to make an iso image from the cd and run it from that. after some research, i found this code to use disk dump and make a raw cd image:
Code:
dd if=/dev/cdrom of=~/cdrom_image.iso
ive done that successfully (making sure the drive is unmounted), but i cant even find the file now. ive searched the filesystem, but it doesnt appear anywhere.
View 1 Replies
View Related
Nov 16, 2010
I am using Avast anti-virus for my linux machine. On internet, I found that it has good user interface. After installing avast I can't get the interface. I've to use Avast via terminal. How can I get the user interface??
View 2 Replies
View Related
May 2, 2010
In Elastix, I get to amportal.conf via the /etc/ director. The file tells you:
[Code]...
It appears that AMPADMINLOGO=logo.png is calling out to something that is not there. I can't even find AMP directory. See below. Do I need to create a directory? This is the result of an ls -F at my /etc/ dir:
[Code]...
View 1 Replies
View Related
Mar 10, 2011
tell me what does error message signify and what should be done to rectify it...bash : lex :command not found
View 3 Replies
View Related
Apr 23, 2010
What i want to do is make a list for the current directory, then checking if it already exists if so ask the user if he wan'ts to overwrite, if no go back, if yes, overwrite the file. At last if the file doesn't exist i want to create it and fill it up with the list from the directory. This is how i failed
if [ -e dirdump.dmp ]; then
echo " The file already exists , overwrite? y/n "
read input
if [$input == "n"]; then
break
[Code].....
I get the following error: script.sh: 15 [y: not found
This is when i choose to type y.
View 6 Replies
View Related
Feb 17, 2011
i have written a simple program in gtk. #include<gtk/gtk.h> //header file main program.. on compiling it is showing fatal error:32 /usr/include/gtk/gtk.h is not found. i have checked the location but file is there.
View 2 Replies
View Related
Jul 18, 2011
While following this guide https://help.ubuntu.com/community/Wi...Driver/bcm43xx to get my wireless to work, I get anerror that says that the directory does not exist.The command is tar xfvj broadcom-wl-4.150.10.5.tar.bz2hird post has a screenshot as an attachment. The tar file is on my Desktop.
View 14 Replies
View Related
Sep 7, 2010
I was trying to install dm-ioband on a fedora 13 OS with Linux kernel 2.6.32.21. I apply the patch. Compile the modules and give module_install. When I do modprobe, it says dm-ioband module not found. When i checked the Kconfig file inside the drivers folder, i cannot find the dm_ioband patch applied to that file. As per the patch file, it should paste some 10+ lines in Kconfig file on line 320. But I dont find line 320.
View 1 Replies
View Related
Jun 19, 2011
I performed the Fedora 15 Upgrade from Fedora 14 which worked fine except when I reboot the system does not find Fedora 15 i.e. I see the Fedora 14 Kernel and not the Fedora 15 Kernel in the reboot sequence.
View 12 Replies
View Related
Aug 8, 2010
Using fedora, when I try "ftp" I get command not found. I have tried "which ftp" and and get "no ftp in" then the bin dir's. I have tried the "locate ftp" but also can't see it: I see lftp, but never heard of it before, is this new and replaced ftp.
Code:
locate ftp
/etc/lftp.conf
/etc/selinux/targeted/modules/active/modules/ftp.pp
/etc/selinux/targeted/modules/active/modules/tftp.pp
/lib/modules/2.6.33.3-85.fc13.i686/kernel/net/ipv4/netfilter/nf_nat_ftp.ko
/lib/modules/2.6.33.3-85.fc13.i686/kernel/net/ipv4/netfilter/nf_nat_tftp.ko
/lib/modules/2.6.33.3-85.fc13.i686/kernel/net/netfilter/nf_conntrack_ftp.ko
/lib/modules/2.6.33.3-85.fc13.i686/kernel/net/netfilter/nf_conntrack_tftp.ko
/lib/modules/2.6.33.3-85.fc13.i686/kernel/net/netfilter/ipvs/ip_vs_ftp.ko
/lib/security/pam_ftp.so .....
View 5 Replies
View Related
Oct 23, 2010
I added $PATH=/usr/local/mysql to .bashrc_profile and I guess I wrote it in the wrong place...now when I log in my fedora the terminal says:
-bash: dircolors: command not found
-bash: cut: command not found
-bash: cut: command not found
[code]....
View 8 Replies
View Related
Feb 10, 2011
I wanted to package my software as an RPM by rpmbuild command. When I run that it complained that gcc not found.
I downloaded gcc and tried to install that from a tar ball. And it complained about cc: coomand not found. I dont know why is this error being shown because I think cc and gcc are the same. Correct me if I am wrong. My system details are:
I tried to download rpm files for gcc but they dont exist for Suse 10.
View 7 Replies
View Related
Mar 25, 2011
I am tying install part image but ı receiving an error message like this:
#./configure
configure: error: SSL Headers not found.
i am using ubuntu 9.10 64bit
View 4 Replies
View Related
