I want to know that how to use cdfs filesystem with redhat 5.2 i am unable to play a video cd in my system. this cd have .dat files. where i can download and install cdfs filesystem in my system.
View 2 RepliesI have a 2 node RH 5u4 64-bit. I have installed and configured the latest Veritas CFS (Cluster File System) which also uses Veritas Cluster Server. File system if VxFS. Storage is on EMC Symmetrix arrays with Veritas Mirroring between the arrays.We have noticed that running 'du -hs' on the shared directory/filesystem where it takes about 3 minutes on one node and 30 - 45 minutes on the other node.I've been running strace on 'du'.'du' runs an 'lstat' on each file (66,000+ files). On the slower node, the ave time spent in 'du' is about .001 seconds longer, which accounts for the 30-45 minutes. Also, the standard deviation is much larger, which means to me that the lstat times are all over the place!Another interesting thing is that iozone profiling shows that the i/o rates from both nodes are darn near identical, with no anomalies at various buffer & file sizes! And, iostat looks really good as does 'vxdmpadm iostat show
View 3 Replies View RelatedI have a 1GB USB drive that has a cdfs partition. the cdfs partition was created when I was trying to install ubuntu on the drive via http://www.debuntu.org/how-to-instal...nux-on-usb-bar. The drive does not have any U3 capabilities so the U3 uninstaller does not work. Is there any way to remove the cdfs drive?
View 9 Replies View Relatedi have installed cdfs 2.6 in my ubuntu9.1:
sudo apt-get install cdfs-src
sudo tar -xvf cdfs.tar.bz2
sudo make
sudo make install
how to write cdfs Configuration into /etc/modules ? when i use command : sudo gedit /etc/modules to open the /etc/modules file,and then how to write??
I cant mount a directory on red hat 5 from red hat 4 using fstab.I keep getting permission denied.I mount directories on the same red hat 5 sys from other red hat 5 and 2 old HPUX systems using fstab.When I try to telnet to it i get "no route to host."
View 3 Replies View RelatedI am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?
I've had a look at some similar threads but as I'm very new to linux they're already a bit technical for me. Sorry, this calls for someone with patience. I gather from other threads that disconnecting an external drive without unmounting is a no-no, and this seems to be the likely cause. Now the disk is read only and I'm unable to change any settings through the usual control panel on ubuntu. I'm just not familiar with the terminal instructions. I tried to cut and past a few command lines from other threads but I got some warnings that proceding could damage data. Like this one: WARNING! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage.
View 5 Replies View RelatedI am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
I had Windows XP working. I then put in a new hard disk and installed Redhat 5 on it. rom then i could only boot into Redhat. Further, everyting is very slow. Anothe rproblem is that Redhat does not see my netwrok so I cannot get onto the Internet. I need to have the choice of booting into XP or Redhat.
View 2 Replies View RelatedWhen I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
I have a following problem: Recently my drive with Ubuntu 9.4 has mysteriously stopped working, i.e. when I switch the computer on it informs me that GRUB didn't find the filesystem. Well, I suppose it happens.
First, I though it was due to the drive dying, but I popped it in an external enclosure and HDTune told me the drive was fine. Wanting to recover the files on the drive before reinstalling I first tried to mount it in said external enclosure under Windows (I have Win Ext2 driver installed which used to work just fine). This time, however, drive gets assigned a letter but upon opening it Windows popped up an error saying that the drive was not formatted and whether I would like to format it then.
Unfazed by this streak of failures I tried to mount it under Linux but, alas, to no avail. I might have tried every single -t operator under mount command but it still won't budge and let me mount.
i need to ftp from a windows xp pc to my redhat 5 system. Cant login.
I also need to ftp files to hpux and other ftp servers and this doesnt work either.
I'm not a subscriber to the redhat network.
I m kapil sharma i want to configure ICS in redhat linux 5.0?i have an IP address which provided by ISP.i want to configure linux server which forward packet in my internal network.i want to access internet in my internal network with configuring linux web server.
View 5 Replies View RelatedHow to install vim on Redhat 5.
View 5 Replies View RelatedI'm a Windows SysAdmin and we currently have a half dozen CentOS 5.5 machines at my current job. I also use Fedora 14 at home. I've been trying to get up to speed on Linux and feel like sticking with the RedHat derivatives as opposed to trying a new distro whenever something new comes out has really helped me.
I have a job interview coming up and it sounds like something I'd really like. They have an upgrade of VMWare from 3.5 to 4.1 in the works and virtualization is really my focus right now. Anyway the guy told me that they use SUSE and he really doesn't like RedHat. I don't remember how he described it, but he made it sound like it was too specialized and SUSE is more open.
This is the job description. Experience with MS Windows 2000, 2003 and 2008, Active Directory Architecture, deployment and group policies Red Hat and Novell SUSE Linux Enterprise server (SLES), OES NetWare (On Linux).
Experience with multiple virtualization products including VMware ESX and VMware desktop. Experience with tools used to analyze and perform bulk changes to LDAP directory content including Apache LDAP studio and MS Access. Experience with XML, LDIF, VB script., SSL and secure communications, SLP, DDNS, YAST, RPM, PAM., CRON, Sniffer Pro and Wire Shark . Is going into a SUSE environment going to screw up all the good linux mojo I have going on? I like working in Fedora/CentOS now. Is there a real difference?
i want to play .swf files in redhat 5.1.
View 3 Replies View Relatedwhat is se linux .n how can we configure it in redhat linux 5
View 1 Replies View RelatedIn our cluster, RedHat4 & 5 machines, if someone locks the computer and walks away no body can use it. Is there a feature in RedHat5, Gnome, KDE etc that would allow for the option of switching users at the lock screen, so more than one person can be logged in?
View 2 Replies View RelatedI want to use Notepad++ on my RedHat machine. But there is no setup file available for Linux. What should I do?
View 1 Replies View Relatedi have a doubt regarding chm file.how to view chm file in redhat linux EL5
View 2 Replies View RelatedRecently I Installed New Redhat server while I Install Any Packages It says:
"No such file or directory"
But If I Search the file using [rpm -qa | grep packages_name]
It shows the package , Also If I Use [rpm -qi package_name] It show package Information , Size and Every thing.
Finally when I going install package using [ rpm -ivh package_name] It says
"No such file or directory"
Screen Shot of error link => [IMG]img135.imageshack.us/img135/2430/linuxerror.jpg[/IMG]
any1 knows how can i download Redhat free ?
View 9 Replies View Relatedi have a logitech webcam c200 . but i don't no how to use webcam in linux.
View 1 Replies View RelatedI put a backgroud job in redhat5 as nohup commad script & I do not see end thsi jon. now I want to bring to as foreground job. how to do this? some paper told me as jobs jobnumber. jobs and spa does not work
ps ua does not return a job number
While attempting to make my secondary hard drive accessible I managed to screw up me RedHat installation.
When I boot I get: Error loading operating system
I can use the PCs boot menu to select the "2. Primary Master Drive" instead of "1. Normal" and (Unix) grub comes up.
Can I use grub to recover my Redhat install?
I have blocked below IP by using iptables command in RedHat Linux 4.0.
Code:
iptables -A INPUT -s 192.168.0.85 -j DROP
It's now totally blocked and can't get access into web or internal network. how I can un-block that IP, so that it can again starts it's normal operation.
accessing webmin in redhat 9? the pc is set to name as localhost.localadmin and running whithout network connectivity, i just want to try and access webmin to see if my 10 users are viewable.
I tried http://localhost:10000 but error appears: connection refused while trying to contact localhost.localadmin:10000
I install the antivirus, ClamAV, onto a RedHat 4.8 box (yes it has to be that release of the OS to work with my other software needs) and after the install and giving the permissions to another user/group dedicated to this AV I get a ton of errors. After the install a few things pop up after a restart/logout. When trying to log back in the Gnome environment crashes so you cannot access any acct aside from using the text based environment. Two other error windows appear as well, one mentioning Bonobo has died and the other saying that Nautilus cannot be started due to Bonobo. I'm not too familiar with Bonobo can anyone fill me in on why those errors occured?
View 2 Replies View Relatedhow to install new own kernel in Redhat 5. Can i install Debian kernel in redhat ?
View 2 Replies View RelatedI have extended the Logical Volume and when I do an lvmdiskscan it shows the new extened value but when I do a df -h the mount (/var) still shows the old value?
View 1 Replies View Related