user@ubuntu:~/Documents/C$ man host_ent No manual entry for host_ent How to install the manpage for host_ent or in_addr under ubuntu?
View 1 RepliesI have been trying to configure webalizer on a centOS 5.5 system. I did the yum install and I found this helpful link...However when I try to change the dir it puts the info into, it keeps giveing me an error cannot cd to the directory. I changed the /etc/webalizer.conf file as described in the above article and try to run it manually same results. /etc/cron.daily/00webalizer Error: Can't change directory to /home/webalizer/When I put the original dir back in the path it writes to /var/www not /var/www/output like it should. I even tried a local /var/wwww/output dir. Then I tried a link to /home/webalizer/output (a dir I created) and same results.(with orginal .cfg in place)I go to my www page remote or on the local network I get page not found errors.In summary.1. Why wont the /etc/webalizer.cf file allow me to change the location of the files?2. How do I display the www page to view the data?3. How can I secure the www page so only I can view the data.
View 4 Replies View RelatedSometimes when I try to display the mounted device in linux it displays devices which are not currently mounted. I want to correct this this using script.
View 1 Replies View RelatedI'm working with a dual-boot laptop running Ubuntu 10.0/Windows 7 and a Debian 5 VPS while the OS's shouldn't have much impact on my question.
What I would like to do is create a html page that I can upload to my VPS which lists all of the files/folders on my local 2TB hard drive (Specifically media such as Movies, Music, TV Shows...). The media obviously will not reside on the server, but I would like to at least have a list which will allow me to select, for instance, a bands artist so that it redirects me to the albums in the directory below.
Ultimately, I'm looking for Open Directory Browsing without actually having the media on my server. I have been attempting to create something to this effect using lynx, however, I'm not sure if it can be done with this command or if it's even possible for that matter.
I remember something like 'info -file=foo.8.gz' made me enter the info page and possibly format foo.8 permanently, so that a later 'info foo' wouldn't have to reformat it.
View 1 Replies View RelatedI have started learning C and am following Ivor Horton's "Beginning C - From Novice to Professional". I've noticed that in the book the structure of the main function is:
int main (void) however on the internet I found a lot of cases: void main (void)Which one is preferred and why?
Does anyone know of a C Language Data Structure Tutorial? I have not been able to find anything much to speak of myself.
View 4 Replies View RelatedI'm trying to display Wi-Fi network info using Conky. I've got it to display the IP address and the upload/download speeds, but for some reason it won't display the network SSID or wireless signal strength. Here's the relevant portion of my conky configuration:
Wi-Fi:
Network: ${wireless_essid eth1}
Signal Strength: ${wireless_link_qual_perc eth1}%
IP address: ${addr eth1}
Download Speed: ${downspeedf eth1} Kb/sec
Upload Speed: ${upspeedf eth1} Kb/sec
It's not the most frustrating problem in the world, but I've been unable to figure out the solution myself after several hours of perusing previous similar problems with Conky configs.
I have searched all over. I cannot find any info on the description of the Fedora mirror release directory structure and the reason for having a "Fedora" and "Everything" directory? Yes I looked at [URL] I mostly work with the Red Hat 5.x. The Fedora release software is kept on a mirror and the DVD release as, (using i386 release):
[Code]....
Kindly take a look at the code below :
Code:
#include <stdio.h>
struct test
{
int i;
int j;
[Code]....
why i am getting this error. I know the error is occuring because i have assigned values to obj.i and obj.j outside main(). But i want to know why do that result in an error. From my part i have created an object 'obj' of stucture 'test' and assigned values to its variables.
I recently built a new computer. For CPU, I am using AMD Athlon II X2 @ 2.8GHz... However, when I do cat /proc/cpuinfo, I get the following:
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II X2 240 Processor
stepping : 2
cpu MHz : 800.000
cache size : 1024 KB
and same thing for processor: 1 Notice that for cpu MHz, it says 800.000. However, that is not correct... Shouldn't it say 2800? Is this a bug? Am I looking at this wrong?
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View RelatedI've seen some desktop screengrabs which have included a transparent graphic (usually in the upper right corner of the screen) that displays current system information such as the hostname, kernel revision, CPU utilization, etc., that is constantly updated.Is that something that is available from Debian? I would like to install it to check it out, if it's available.
View 5 Replies View RelatedWhen I try to load a php file my browser downloads the file instead of displaying the page. Here is my apache conf file.
#
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the configuration directives that give the server its instructions.
# See [URL] for detailed information about the directives.
# Do NOT simply read the instructions in here without understanding what they do. They're here only as hints or reminders. If you are unsure consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server, which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to different IP addresses or hostnames and have them handled by the same Apache server process.
# Configuration and logfile names: If the filenames you specify for many of the server's control files begin with "/" (or "drive:/" for Win32), the server will use that explicit path. If the filenames do *not* begin with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" with ServerRoot set to "" will be interpreted by the
# server as "//var/log/apache2/foo.log".
#
I my trying to install Ubuntu onto a new 1 TByte Sata HDD on my Dell 8400. The computer has no other OS installed as the old HDD containing Windows XP has being removed. The new hdd has being fully formatted and is set up as a NTFS with a single partition of 1 TByte. I downloaded the latest version of UBuntu and burned it to a cd as a ISO file. When I boot my computer up from this cd I am asked to enter my language of choice and then I get the main menu screen. On this screen I choose option (2) - Install Ubuntu. After a few minutes during which time you can hear the cd being accessed the screen just displays this main menu and never changes. I have tried twice using this install option but after 45-50 minutes the screen still never changes. No progress information is given. If it is normal how long does the installation generally take?
View 2 Replies View RelatedI guess this is a part deux, since I already posted one rendering issue which was eventually resolved ... having to do with the themes of this Debian Forum. Well, I don't know if this is related to that, but yesterday I noticed on another site that my Iceweasel 4.01 is not displaying portions of pages properly. See attached images. Both Chrome & Opera display that page correctly, I've included a screenshot of the same page with Chrome. I have JAVA installed and everything works perfectly fine accross the board on all browsers, except for this "once in a while" issue with Iceweasel. I've noticed this "missing content oddity" on three sites so far (out of 50 or more). No problem with eBay, craigslist, paypal, and other major players.
Open the images with a new tab, then compare both images side by side for best results.
Iceweasel: [url]
Chrome: [url]
If I type
Code:
man perl
on the command line, I get the man page for perl, which lists all of the sections into which the perl man pages have been split. How do I access one of these sections? For instance, the first section is perlintro, but if I type
Code:
man perlintro
I get an error saying there is no such manual entry. How do I access these parts of the manual?
Since I have upgraded to Lucid (and thus to Mozilla 3.6.6), I am experiencing a bunch of annoyances with Mozilla.
1) logging into my GoDaddy account keeps displaying the login screen and not my accounts page (yes, I checked the password)
2) creating an account in bugzilla resulted in an "Invalid OpenID transaction" error message instead of a confirmation page
3) the [URL] page popped up a parser error instead of the website.
Midori and Mozilla 3.0.8 work just fine. Does anybody else have problems with mozilla 3.6.6 and above?
I'm using fedora 14. And I have installed apache, PHP and MySQL. I tried testing PHP with phpinfo(). But when I view it view my browser (localhost/test.php) it just shows the code itself instead of displaying the phpinfo page. This is the content of my test.php page.
<?php
phpinfo();
?>
so i cannot install anything because update-info-dir file is missing from /var/lib/dpkg/info/ .. I've searched for the last day and a half for a way to fix this, but nothing. can't even update dpkg because of this. so how do I bypass or fix this so I can install stuff (this is a fresh install of ubuntu 10.04 lts Lucid Lynx).
View 9 Replies View RelatedWhen I read man pages using the man command, i.e. 'man find', I am missing characters, like this code...
Is anyone else experiencing this or have any tips on how to solve the issue?
I am new to Ubuntu and am attempting to do a clean install on my second pc. I'm semi computer illiterate, and I am stuck on the Who are you? page. It appears that I have all the fields filled in correctly, with checks next to them all and "Fair password" displayed. I have Log in automatically checked, and I have require my password to log in as well as encrypt my home folder unchecked. I was wondering if there had been problems with this or is there something that I am doing wrong with my installation? The forward button is not clickable for some reason
View 3 Replies View RelatedI do a lot of beta testing on vario ustros and encounter a problem during initialinstalls .does one capture the screen display during installation when an error occurs?The display usually doesn't stay on long enough to copy the information, even when moving into an error console (such as Alt-F3).often doesn't have the install data, especially errors.Screen capture programs are not up and running at that point.I've tried taking a picture of the screen with a digital camera but the results were not very good.
View 4 Replies View RelatedI want to write a script that keeps "grepping" strings from the Main page of the Linksys PAP2T every 30 seconds.It seems to be simple:1- lynx -auth=user:password URL2- grep the strings3- process themthe problem is that the page is writed in PHP and Lynx does not clear the authentication credentials with a 401 server response!w3m works.. but I don't know how to set the autologin and how to export the page to a text.With firefox.. I can set the home page as but it ask if it can continue before sending the data.. how can I force it and how can I obtain a text from it?I don't know.
View 1 Replies View RelatedHow can I find page hit and page miss ratio in linux fedora core 12?
View 3 Replies View RelatedI'm using ubuntu 10.04 beta 1. when I try to update & upgrade I get the following error:
Code:
Setting up install-info (4.13a.dfsg.1-5ubuntu1) .../etc/environment: line 4: LC-ALL=en_US.UTF-8: command not found dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 127 Errors were encountered while processing: install-info
All has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
View 2 Replies View RelatedI wanted to install a Linux distro to a flash drive so that I can have a portable OS with all my settings, programs, etc. wherever I go. So I fired up a Linux Mint Live CD and installed Mint to the flash drive, and this seems to work OK. But now, whenever I try to boot up my system normally without the flash drive plugged in, it doesn't seem to work. It basically hangs for a bit, and then I get the following prompt:
However, when I try powering my system up when the USB is plugged into the computer, it gives me an option between using the OS installed on my USB and the OS installed on my HD. Selecting the latter, everything loads up just fine. I'm guessing that installing Mint to the flash drive somehow messed with my native Grub installation.
i recently install linux mint and i need to install flash player but i can't do it from from the web page.
View 4 Replies View RelatedI want to combine 4 ps(or pdf) page to single page and for this i have try a2ps command as:
a2ps -4 1.ps 2.ps 3.ps 4.ps -o outfile.ps
Event through it divide the page into four section. But only give one output of my four input. other three section is blank. Is i am doing some wrong or Is their any other command to do so.