I am just a couple of month into using any Linux OS and I use Ubuntu 9.10. I ordered for the Ubuntu 10.04 CD from Canonical to upgrade because I don't have a fast Internet connection to upgrade over the net.The problem is that when I insist the 10.04 CD into the tray it doesn't start the upgrade process. Please what can I do?
View 5 RepliesToday morning I was upgrading ubuntu 10.10 to 11.04. When the packages were downloading it was showing 20m left to download. At that time I had a battery of 2 hrs. As I had to go so I left my laptop on and went( the charger unplugged ).
When I came back I get the following message:
Code:
I know this is coming because of improper shutdown. Also I think that the new ubuntu was not yet installed as in the boot menu it was showing old images only..I had Widows 7 also.
I was able to successfully upgrade my debian server from Etch to Lenny, however now I am unable to access Bugzilla via the establish url's.
The error I am getting is:
Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [no address given] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
Here is my error.log output:
[Sun Jan 02 10:58:55 2011] [error] [client 158.114.150.87] Not a subroutine reference at Bugzilla/Template.pm line 59.
[Sun Jan 02 10:58:55 2011] [error] [client 158.114.150.87] Compilation failed in require at Bugzilla.pm line 34.
[Code]....
Ok so after all the searching I did it came down to the simple fact that Bugzilla 2.22 doesn't work with Perl 5.10. I am in the process of upgrading to Bugzilla3 and running into some issues there getting my backup database loaded due to the install couldn't finish.
When you upgrade you are prompted to create a new database or use one already created. When I selected to use one already created is caused a break in the installation and I now I can't seem to get the installation to finish.
I was using RHAT 6.0 Open Client for a couple months and didn't have any issues. Recently my company released version 6.1 of Open Client and recommended to upgrade it. Upgrade went smoothly and I didn't notice any problems until at some point it failed to run 'Software Update' application.
View 3 Replies View RelatedI am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.
View 2 Replies View Relatedlast month i had ubuntu 9.04 on my pc but i formated and i install 9.10 then i formatted again with windows xp and now i want to install again the 9.10..but when i try to install at the boot ubuntu docent boot up also fedora(12),opensuse and ubuntu 9.10 but with ubuntu 9.04 everything is ok..i try to upgrade from 9.04 to 9.10 using update manager but when i restart my pc ubuntu doesn't boot up?
View 1 Replies View RelatedI cannot upgrade from 8.04. I go to the update manager, and it says everything is up-to-date. I've tried going in through terminal.
View 2 Replies View RelatedI'm currently trying to upgrade to 10.04, but I'm experiencing a problem. Currently I am encountering the following error message when trying to upgrade: "An unresolvable problem occurred while calculating the upgrade: The package 'ubuntu-desktop' is marked for removal but it is in the removal blacklist."
The message directed me to /var/log/dist-upgrade. I looked at the apt.log file and I discovered the following at the end of the file:
"Investigating ubuntu-desktop
Package ubuntu-desktop has broken Depends on libsdl1.2debian-pulseaudio
Considering libsdl1.2debian-pulseaudio 2 as a solution to ubuntu-desktop 0
[code]....
I downloaded Ubuntu 10.04 Alternate CD and tried to upgrade 8.04 to 10.04. When I run upgrade (with the option "Include latest updates from the Internet?" set to "No" ) in the "Setting new software channels" it gives this error (ScreenShot attached):
Code:
An unresolvable problem occurred while calculating the upgrade:
E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
I have a Ubuntu Server machine that I can't get to 10.04. Sometime in the past I updated it to 9.04, but perhaps something went wrong. When I do a do-release-upgrade, it tells me there are no upgrades available. I tried a bunch of things but no luck, so I installed gnome to try the gui update manager on the console. When I start it, it first tells me that my distribution is no longer supported and that I should update. It gives me the button that says 9.04 is available, but after I click it I'm told that there are no new versions available.
View 5 Replies View RelatedI ran sudo apt-get update and sudo apt-get dist-upgrade . It says that 3 packages are not upgraded. Thet are linux-generic, linux-image-generic and linux-headers generic. I have never had this problem when using sudo apt-get dist-upgrade since it is supposed to resolve all conflicts and other issues with upgrades. Can anyone tell me how I can upgrade those three packages?
View 7 Replies View RelatedAfter running "sudo apt-get update" I try and run "sudo apt-get upgrade" but I get the following errors:
Code:
mano@mano-laptop:~$ sudo apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
I have been using ubuntu for a while to be exact 8.10. I love using ubuntu and more importantly wishes to upgrade to the latest version. But for some reason my usb and touchpad mouse drivers are not working in any versions after 8.10. My laptop is think pad r51, an old one. I want to upgrade and continue using ubuntu, but cant due to mouse drivers...
View 3 Replies View RelatedI'm using Ubuntu 10.04 (upgraded from 9.10) and I can't find a way to upgrade to the new 10.04.1 version.
I've updated all the software sources, changed my country location to US, and even generated a new sources.list file, but my update manager never displays an option to make an upgrade to 10.04.1
Here are my current settings:
Code:
###### Ubuntu Main Repos
deb http://pt.archive.ubuntu.com/ubuntu/ lucid main restricted universe multiverse
###### Ubuntu Update Repos
deb http://pt.archive.ubuntu.com/ubuntu/ lucid-security main restricted universe multiverse
[Code].....
I have Ubuntu 10.04 and I am trying to upgrade to 10.10 but when I have the update manager check for updates it is not an option.
View 5 Replies View RelatedAfter i upgraded my server from 10.04 to 10.10 one main user account(the one i use to su) has lost the contents of the public_html directory, I'm not sure why this has happened all other users accounts are intact, i had this issue once before and fixed it, but i cannot seen to find the solution to this now.
View 3 Replies View Relatedwhen I upgraded from 10.04 to 10.10 I lost the ability to enable effects, lost the ability to use compiz and my screen got messed up and my video card driver wasn't working forcing me to re-install it several times. Even now my system doesn't totally work how it used to in 10.04.I want to avoid that in this upgrade. I downloaded the live cd since the wire upgrade took a bunch of hours. But my concern is the graphics, I want to be able to use effects since Unity uses effects, I have unity 2d installed but it doesn't work. So somehow enabling effects is a must.
what steps do I take to make the upgrade process as smooth as possible, I've already done my app updates so my system is current, I'll disable 3rd party ppa's like before but what else? Do I have to disable my video card driver so the live cd video card driver can be installed? How do I keep my setting as is but allow for all the 11.04 goodness to be installed?Or is erasing my current Ubuntu partition and reinstalling 11.04 fresh the best option?
I am running Lucid Lynx on a Dell Inspiron 1720 laptop. Every time I try to upgrade to 11.10 (via the Update Manager) I get the below listed errors. Any suggestions are appreciated.
W:Failed to fetch http://astromirror.uchicago.edu/ubun...86/Packages.gz 404 Not Found
, W:Failed to fetch http://astromirror.uchicago.edu/ubun...86/Packages.gz 404 Not Found
, W:Failed to fetch http://astromirror.uchicago.edu/ubun...rce/Sources.gz 404 Not Found[code]....
I have not been able to upgrade VirtualBox for a while now. I get the attached error
View 9 Replies View RelatedSince 9.10 was available, I've been unable to upgrade to the next distribution. Today I actually took the time to copy down and make note of the error given. The pop-up error is this: Could not calculate the upgrade
[Code]...
I just upgraded to 10.04 from 9.10. Everything seemed to go well and it looks like everything transfered over fine except my email stuff. I was using Evolution with 9.10, but it looks like none of that is on 10.04. Not too worried about the program itself, but I would like to have kept my contacts info and a few of the emails from the last couple of days.
View 1 Replies View RelatedUpgrade from Karmic - was using EasyBCD in Vista. Tried upgrading to Grub2, reinstalling Grub - but can not boot to either. Here is my Results.txt file from [URL]
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb
[code]....
I'm trying to upgrade Virtualbox but I get the following error. What can I do? I use Ubuntu Release 10.04 with Linux 2.6.32-24 generic.
View 4 Replies View RelatedI have this problem occur when I want to update and upgrade the software, both,via terminal and synaptic...
View 9 Replies View RelatedI upgraded to 10.10, and grub just came back with "no wubildr", and then a "no other mode", or something like that. I dual boot xp (I used it to install wubi), and I need a few files off my linux partition. Is there a way to:recover my files within windows
skip grub and go strait to ubuntu
I have an out-of-the-box Belkin G wireless router. I also have a Linksys USB adapter on a particular box. When I run the Ubuntu 8.10 live CD on that box I can see the router's SSID, I supply the password, and all is fine. I think that rules out any problems with the router or the ISP.
When I run the Ubuntu 10.04 on that same box I can still see the SSID but when I try to connect to it the DHCP fails. Checking the system logs I see the DHCPDISCOVER entries but no corresponding DHCPOFFER responses. So this seems on the surface to be a DHCP problem. To get around this I tried to edit the connection to use manually supplied settings. On the 8.10 system I supplied:
Code:
IP=192.168.2.200,
Netmask=255.255.255.0
Gateway=192.168.2.1
DNS=192.168.2.1
and again all worked just fine. But when I supply the same values to the 10.04 system it does not work. Even attempts to ping the router (192.168.2.1) fail. So if this fails then perhaps the problem is more fundamental than DHCP? I have tried searching the net for quite a while and found a number of similar problems, but clear solutions seem to be lacking (or I haven't come across them). One common suggestion is to blacklist the ipv6 module. I tried that and it seemed to have no effect. Since this worked so well in 8.10 and doesn't work in 10.04.
I have Ubuntu Mavrick installed on windows vista using wubi. it has been running smoothly since RC, when i installed it. now, after I updated using Update Manager last night I was asked to reboot. Upon rebooting i was not able to use ubuntu. the Ubuntu option is there on the windows boot menu but after i select it gruub does not appear. instead it reboots again. is there any way to fix this problem so i can use ubuntu again? if not how can i recover my ubuntu files and folders? Please help because i dont really want to reinstall after all the tweaking and stuff.
View 3 Replies View RelatedI started off on 9.10 and upgraded to 10.4 without any problems. However during the upgrade to 10.10 got asked about grub (see attachment 1& 2) and I think I should have ticked the other boxs but I didn't. I also got an error (see3) The 4th one I think is a different issue.On the restart it would only get to the purple screen before the login field appears. I presume I need to do something to the grub but have no idea what.My system is 64bit and a raid 1. The attachment 5 shows the partition arrangement I can boot into the the PC with a live (32bit 10.10) cd.
View 3 Replies View RelatedI am running 10.04 LTS inside Windowsxp.LTS is totally updated.What is more,in the settings section of update manager I have ticked to show normal releases as well.Still,update manager is not displaying "10.10 is available"Thus,unable to upgrade.
View 3 Replies View RelatedI updated my pc today, all went well no errors during upgrade. But I am unable to boot. I get the splash screen with Ubuntu and 4 coloured dots, then it goes and i get a page of txt. *starting apparmor profiles skipping profile in /etc/apparmor.d/disable: usr.bin.firefox plymouthd: ply-keyboard.c:384: ply_keyboard_watch_for_input: Assertion `keyboard != ((void*)0)' failed. *Setting sensors limits rather than invoking int scripts through /etc/init.d, use the service ( utility, e.g service s20plymouth-splash start Since the script you are attempting to invoke has been converted to an upstart job. you may also use the start ( utility, eg. start s20plymouth-splash Start: uknown job S20plymouth splash
If i leave it the screen just goes black I can get to ttyl by using ctrl&alt&f7 and log in.but thats about it startx just tells me no screens found I expect because xorg isn't used. If i go into recovery mode, failsafe graphics won't load either. So i select netroot and the enter startx which will give me a root desktop. I tried reinstalling grub, but no change. Not sure where to go from here i suspect it is something to do with plymouth? but i am no expert even tho i've been a user for 4 years