General :: Telnet Session Timout Settings In Redhat 5?
Feb 22, 2010where to set the telnet session timeout for the IDLE time in redhat linux.
View 2 Replies
ADVERTISEMENT
Slackware :: Script - Telnet Session Is Opened And Then Some More Commands Are Forwarded To That Session?
Apr 12, 2010hypothetically speaking, can i write a script in which a telnet session is opened and then some more commands are forwarded to that session?
View 4 Replies View RelatedGeneral :: Command Line To Open A Second Telnet Session ?
Mar 15, 2010On my ubuntu 9.10 pc i am not running a GUI.
Every thing is run from command line.
How do i start a second telnet session from command line.
Plus can i have 4 telnet session open and move from one to the next and back again.
General :: Error "already Connected To Xxx" When Connect To Computers Using This Telnet Session
Aug 21, 2010I have got three computers at my home[A,B,C] ( all connected to each other), now I connect to B from A using telnet( $telnet ip_B) , but when I try to connect to C using this telnet session( telnet > open ip_C) , I get this error, "already connected to xxx". Is it possible to connect A to B and then use that session to connect to C, so that C finds that the request is being asked by B.
View 7 Replies View RelatedGeneral :: Man Page For Redhat Networking Settings?
Apr 23, 20111. im working on several distros, sometimes i dont remember the syntax of the ethernet settings (i.e those directives in /etc/sysconfig/network-scripts/ifcfg-eth0,or /etc/network/interfaces ) in redhat its IPADDR,NETMASK etc..
in ubunto its:
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.254
so,where exactly is the man page for this information, i tried (in centos) to type man -k "IPADDR" to find some reference but i come up with nothing.
2. sometimes im logged as user "user1" and then i do "su user2" and then again "su user3",
i would like to know how far the nesting is and who was first.. i.e is there any command to give me this output: "user1->user2->user3"?
Ubuntu :: Telnet Session Hanging On 9.04?
Apr 25, 2010I am running Ubuntu 9.04 on a wireless networked host machine. The wireless NIC is usb based. Its running inetd for network based servers (telnet, ftp etc).For some reason telnet, ssh or any application specific connection, hangs for a few seconds and then comes back. This happens after every few minutes. I do not loose any sessions or any data flowing across but it is sort of very annoying.It is a dual boot machine and I have also got Windows XP 64-bit. When am running on windows this does not happen, hence am not sure if it is something to do with the wirless nic or something else
View 2 Replies View RelatedProgramming :: Telnet- How To Restart Session
Apr 23, 2011I have done some tcp stream multiplexer. I'm using it as independent login proxy (user is once authenticated and then switched to hidden device (cisco)). But I need to reset session (no connection) configuration, because cisco supports xterm, ctr-c, etc... Am I able to do? Just restart negotiation? Using IAC codes?
View 2 Replies View RelatedFedora :: Using Lxterminal To Connect To A Telnet Session On Another *nix Box
Jun 22, 2011I am using lxterminal to connect to a telnet session on another *nix box.
After I connect, I always have to enter the command
Code:
export TERM=xterm
is there anyway to automate this?
Security :: Restrict Telnet Session To Users ?
Oct 22, 2009I want restrict telnet session to users.
That means the client login one user at a time. not multiple login.
For example:
I want restrict this. How to restrict one user to use multiple login.
Ubuntu :: Can't Spawn Telnet Session In Expect Script
Apr 22, 2010I am moving my migration forward and am trying to get my expect scripts tested and found one that no longer works. Quite simply, it spawns a telnet session to a router.
#!/usr/bin/expect
set env(TERM) vt100
set timeout 3
set send_human {.1 .3 1 .05 2}
set timeout -1
#
spawn telnet 10.254.3.232
and that's it. The result of the script is that the command to spawn simply shows up on the screen like it is a puts command. On my older openSUSE system, it worked fine. I am running Ubuntu v9.10 desktop, and expect and its libs are patched to the latest rev, expect is 5.43.0.
Software :: Process Running Even After Telnet Session Has Been Deliberately Ended?
Mar 28, 2011I have ubuntu 10.04 & I telnet to windows vista. Even if I create a hidden process [URL].. from batch file . It seems the process gets killed when I end connection at port 23 to host. Maybe , the hidden process created is still child of current telnet session so tree is killed as session ends. Is there a way to keep process running even after telnet session has ended ?
View 6 Replies View RelatedSoftware :: Shell Script Commands To Automate Server Or Host Telnet Login Session?
Feb 7, 2010finally i found the script for telnet automated login session...<<Mod edit: questionable link removed>>
View 4 Replies View RelatedProgramming :: TCL Expect Script That Spawns A Telnet Session To A Nortel - Response In Expect_out Is Not Consistent
Dec 2, 2010I have a TCL expect script that spawns a telnet session to a Nortel DMS100 to execute some commands. The strange thing is that the response in expect_out is not consistent. It sometimes contains a extra enter or newline. This results in differences in the expect out buffer. Here is a part of the script:
send "time
"
sleep 1
expect -re ">"
[code]...
This command displays the time. The correct output should be (with log_user=1):
>time
Time is 11:44:04
>
But sometimes the output is:
>timeTime is 11:45:04
>
As you can see here the is missing on the command that expect sends , or at least in the echo that is comming back. I use a split command to filter out the response in the expect_out buffer, but this fails when the is missing. Here is a example with the debug enabled:
[code]....
I suspect it has something to do with a slow response of the switch. I tried to send the time command slow and with the send_human but the result is the same. A timeout between the send and expect also doesn't help.
Software :: Migrate RedHat To VMware Session?
Feb 11, 2009I need to migrate a current Physical server to a VMware session.
I understand migrating Linux is reactively easy manually, but I need a direct image of the server.
Is there a tool which will do this for me?
Networking :: PTCL Broadband Settings In Redhat?
Apr 3, 2011How to do PTCL broadband settings in redhat.in windows i just do followingRight Click My Network Places on desktop and select Properties Right Click Local Area Connections andselect Properties.In the General Tab; double click on Internet Protocol (TCP/IP) and made the following settings:
ip: 192.168.1.2
subnet: 255.255.255.0
gateway: 192.168.1.1
preffered dns: 203.135.0.70
alternate dns: 203.135.1.117
Ubuntu :: Saving All Of Settings In A Session?
Jun 17, 2010I've been playing around with my gnome set up and getting it to look nice, but every time I log out, it messes itself up in just a couple of ways. I saved the session, but that doesn't appear to be catching everything. The problems I'm having -I disable trackpad clicking with "sudo trackpad notap", but I need to reenter this every time I log in or it's turned back on again.
No matter what I do to screenlets, I can't seem to get it to remember that I only want ONE picture frame on my desktop when I boot up, and only ONE CPU monitor. It instead boots up 2 and 3 respectively.I have set stickynote to open up automatically, but it never boots up to the screen, only the panel above. I then have to double click on it to get it to open.Is there a way to save not just the session but every setting you've got running currently on a Ubuntu machine, and then load them automatically when you boot?
Ubuntu :: Compiz Settings Are Reset Every Session?
Oct 9, 2010Since a while ago, any changes I make to my Compiz settings are not remembered when I log in again.
On starting a new gnome session, Compiz is firstly always disabled ("Visual Effects" in gnome-appearance-properties is set to "None"). I can enable the "Extra" option, but when I open gnome-appearance-properties a second time, the option is not selected (although Compiz will now be running), and when I log out and back in, Compiz will be disabled again.
After enabling it manually, I find that secondly, the "Desktop Cube" largedesktop feature is replaced by "Desktop Wall". I can change this in ccsm, and the changes take effect immediately, but when I start ccsm a second time, the changes are gone (the "Desktop Cube" checkbox is unselected). After logging out and back in, the old settings are in effect again.
Since ccsm will forget the changes even before I log out, I suspect it is somehow unable to save them. I've tried looking at the stderr output of gnome-appearance-properties and ccsm, but haven't seen anything that looks relevant.
Networking :: Difference Between Krb5-telnet And Ekrb5-telnet
Feb 18, 2010I am trying to find the difference between the above two services. Both are under xinetd and can someone please explain the difference between them (is one more secure than the other one?)
View 1 Replies View RelatedGeneral :: Cant Mount Redhat 5.0 From Redhat 4.0 Via Fstab?
May 5, 2011I cant mount a directory on red hat 5 from red hat 4 using fstab.I keep getting permission denied.I mount directories on the same red hat 5 sys from other red hat 5 and 2 old HPUX systems using fstab.When I try to telnet to it i get "no route to host."
View 3 Replies View RelatedGeneral :: Fedora 13 - Cannot Get Any Of The Resolutions Settings To Look Right On Separate X Screen With The Nvidia X Server Settings Gui
Aug 21, 2010I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
View 14 Replies View RelatedGeneral :: Session Timeout - What Is Considered A Idle "session" ?
May 11, 2010Info about session timeout.
I use tmout = 15 min in my /etc/profile (along with readonly tmout). i have some issues i need to address, looking for ideas.
1. what is considered a idle "session" ?
2. if i & a process to the background and do nothing is this a idle session?
3. if user uses su to a higher level, are there now two sessions? is the tmout for user suspended until su user time outs or leaves su session?
4. i have some users who will run long sql queries. is there a workaround to have the session remain active until process has finished?
General :: Allow Telnet From One Ip Segment?
Mar 8, 2010I want to allow only ip segment(212.154.75.0/24) to telnet the server(RHEL-7.3).How this can be done using iptables?In the server i gave this command:
# iptables -I FORWARD -s 212.154.75.0/24 -p tcp --dport 23 -j ACCEPT
output is
0 0 ACCEPT tcp -- * * 212.154.75.0/24 0.0.0.0/0 tcp
[code]....
General :: Can Ssh Into Ubuntu But Cannot Telnet
Aug 21, 2010i set up a MAC power pc with ubuntu. i can ssh into it, but i cannot telnet. this is what i get when i telnet to the host i can only telnet to port 80
[Code]....
Red Hat :: Redhat 5 Windows XP Dual Boot Boots Only Into Redhat?
Jan 11, 2011I had Windows XP working. I then put in a new hard disk and installed Redhat 5 on it. rom then i could only boot into Redhat. Further, everyting is very slow. Anothe rproblem is that Redhat does not see my netwrok so I cannot get onto the Internet. I need to have the choice of booting into XP or Redhat.
View 2 Replies View RelatedGeneral :: Compiling Telnet Client?
Apr 26, 2010i have a telnet client src rpm. I need to make some changes in the src and recompile it. i am having problems recompiling src rpm
View 5 Replies View RelatedGeneral :: Connect To Telnet To Server
Mar 24, 2010I would like to make a telnet connection to one server. I can't do this at first beceause i necesary to connect to another server. I use the program putty and this is the command to connect to my first machine:
[Code]....
General :: Setup/enabled Telnet Only For Particular Dir?
Oct 11, 2010how do I setup/enabled telnet access only for particular directory, when any user log-in on to my server, he gets something like below pattern on to remote server, and only login to specified directory, also he need to run few bash commands.
[ravi@mydomain00 ~]$ telnet mydomain.com
Trying 127.0.0.1...
Connected to mydomain.com (127.0.0.1).
Escape character is '^]'.
[Code]....
General :: Install Telnet In Fedora 8?
Mar 9, 2010I need to make a test on Fedora 8, with a Telnet... and seems NOT to beenabled.The package is installed, but if I have a look into /etc/xinedtd thereis no TELNET file ?Is there any changes into FEDORA 8 ? How to I configure Telner in Fedora 8 ?
View 6 Replies View RelatedGeneral :: Need To Open Telnet Port
May 6, 2011I am trying to open the telnet port on my system with port 4100 and for the same i have inserted the entries in iptables file using below command./sbin/iptables -A INPUT -s 132.186.208.83/24 -p tcp �-dport 4100 -j ACCEPT.
View 1 Replies View RelatedGeneral :: Unable To Login Using Telnet?
Sep 8, 2010I was just checking the configuration file of /etc/xinetd.d/krb5-telnet and i thought of enabling the telnet.I modified the configuration file accordingly and restarted the server.
Code:
# cat /etc/xinetd.d/krb5-telnet
# default: off
[code]...
