General :: Smartcards For Storing Gpg/ssh Keys?

Apr 14, 2010

I'm interested in storing my SSH keys and gpg keys on a smartcard for added security. However, I'm a bit uncertain on a few points, which are as follows:

How many keys can I get on a card? I assume both SSH and GPG can store keys on the card. Is there a limit to key size? I see a lot of cards saying they support 2048-bit keys, what about larger sizes? Hardware: can anyone recommend a card/reader combination that works well? I've done a fair amount of research and it seems PC/SC readers can be a bit iffy - is this your experience? Have I missed anything I should be asking? Are there any other hurdles?

I'm aware fsf europe give away cards with membership - I'm not sure I want to join, but... are these cards any good?

View 3 Replies


ADVERTISEMENT

General :: F3 - F5 Keys Incorrectly Behaving As Audio Keys / Remap Them To Original Meaning?

Apr 17, 2010

I don't know if this is a configuration issue or a hardware issue, but I have a Kinesis Advantage USB keyboard and for some reason the F3-F5 keys aren't responding as they used to. They don't respond to anything and, when I tried using F5 on Emacs, it said <XF86AudioNext> is undefined, so I guess it's a weird mapping problem.

Any idea how I could remap them to the original meaning?

View 2 Replies View Related

General :: Re-mapping Non-standard Keys To Modifier Keys?

Apr 7, 2011

I'm running Debian (Squeeze) and I have a toshiba portege m700. It has five buttons on the front just under the screen, which are the only ones accessible when you flip the screen over into tablet mode. One of them is for rotating the screen, and another is for switching to external display. I want to remap the remaining three to control, alt and super so that I can use shortcuts with the stylusThe problem is, when I used showkey to find out the key codes, I found out that each button generates more than one key code:Button 1:

key 126 press >> super_r, although this is distinct from the actual super key (125)
key 7 press >> 6
key 7 release
key 126 release

View 4 Replies View Related

General :: Storing Array From Awk In Bash?

Nov 24, 2010

i'm using awk inside bash. i've got an array in awk called arrayinawk. everytime i call another awk command in bash i have to keep creating arrayinawk to work with it. is there anyway i can store arrayinawk in bash and just call the stored value next time i use awk?

View 14 Replies View Related

General :: Variable Storing The Previously Executed Command?

May 23, 2010

I want to use PROMPT_COMMAND variable to build a history of all the commands i execute. So Basically i want to append the last executed command to my own command log file. How can i find the last executed command ?

I want to add PROMPT_COMMAND="echo $last_executed_command >> my_command_log" But I am not sure how to find the last executed command

View 2 Replies View Related

General :: Get The Control Panel But The Report Is Not Storing In The Database?

May 4, 2010

Installed configured the squid2mysql, now i can get the control panel but the report is not storing in the database

other wise if you are having any other squid monitoring tool

View 2 Replies View Related

General :: Storing Data To An External Device From Aspire One?

Aug 14, 2010

I have an Aspire One with Linux operating system.

I have an external hard drive that I want to save data to from my Aspire One however when I try I get a message that the external hard drive is full.

I know it isn't full and when I use the external hard drive on my other pc with Window 7 it is fine.

I am assuming my problem is something to do with the ACER Aspire One

View 7 Replies View Related

General :: Storing A Variable In A Shell Script After Awk Output?

Feb 8, 2010

On command line I have no problem storing a variable e.g

Code:

:~/bin$ process=`ps -ef | awk ' $8 == "idesk" { print $2 }'`
:~/bin$ echo $process
26736
:~/bin$

When I try to incorporate this into a shell script I get a blank.

Code:

:~/bin$ cat process_idesk
#!/bin/bash
process=`ps -ef | awk ' $8 == "idesk" { print $2 }'`

[code]....

The process_idesk script has been chmoded to be executable by the user. I'm sure there must be a silly omission on my behalf.

View 3 Replies View Related

General :: Best Filesystem Choices For NFS Storing VMware Disk Images?

May 17, 2010

Currently we use an iSCSI SAN as storage for several VMware ESXi servers. I am investigating the use of an NFS target on a Linux server for additional virtual machines. I am also open to the idea of using an alternative operating system (like OpenSolaris) if it will provide significant advantages.What Linux-based filesystem favours very large contiguous files (like VMware's disk images)? Alternatively, how have people found ZFS on OpenSolaris for this kind of workload?

View 1 Replies View Related

General :: Reading Numbers From Text File And Storing In Array?

May 26, 2010

I'm writing a bash script where I read a text file (containing a column of numbers) and store each line in an array. There seem to be some problems with the whole thing however, but only for some files and not others. Here's what I do:

Code:
#!/bin/bash
file=time_notOk.txt ### The file with a column of numbers
i=0 ### Array counter
### Read the file

[Code]....

View 3 Replies View Related

General :: Cfdisk Filesystem Type For Storing Videos On A Hard Drive

Nov 29, 2010

I have a spare harddrive that I want to store my videos on. They are in mp4 format. I'm using cfdisk to create a new clean partition on the drive. What filesystem type should i make it (linux,HPFS/NTFS,FAT16...)

View 2 Replies View Related

General :: Use Sender Or Any Thing In Header As Ame Of Storing Mail File In Procmailrc?

Apr 19, 2011

I want to know how can I use sender an receiver of the email in name of file for storing mail in procmailrc. I made one but it does not work.

Quote:

SUBJECT=`formail -xSubject:` # regular field
FROM=`formail -rt -xTo:` # special case
:0 b
* ^FROM.*
| sed -e '/^To: +?[0-9]*$/,/report/!d' > ${FROM}${SUBJECT}--`mktemp 20`date +%y-%m-%d-%S--`XXXXXX`

it works when I use :

Quote:

| sed -e '/^To: +?[0-9]*$/,/report/!d' > `mktemp 20`date +%y-%m-%d-%S--`XXXXXX`

View 1 Replies View Related

General :: Bash + Reading Values (numbers) From A File And Storing Them Into An Array?

Nov 4, 2010

I have to read a couple of numbers from a random.txt file. In this .txt file there are random numbers. They are separated by a space. Example if you opened test.txt:

test.txt :1 6 1 3 6 8 10 2 4

I would like to read those numbers using CAT and store them into an array:

numlen=${#num[*]} - (must be like this because it is a part of a larger program)

View 5 Replies View Related

Ubuntu :: Accessibility Equivalent For Sticky Keys And Mouse Keys?

Jun 27, 2011

Just wondering if Ubuntu has an Accessibility equivalent for sticky keys and mouse keys.

View 1 Replies View Related

General :: Way To Prevent Network Manager From Storing Password For Wireless Network

Sep 27, 2010

Our corporate wireless network uses continuously changing passwords with RSA tokens.So every time we need to connect to the wireless we need to enter a new password off the RSA token. For extra fun using the wrong password a couple of times in a row causes the users account to be locked.Network manager automatically stores and reuses the password, with the net result that it is constant getting my account locked.Is there some way to prevent it from storing my password for that network?

View 1 Replies View Related

General :: Bash: Calculating In Array And Storing Result In Array?

Dec 2, 2010

I have an array called arrayini which stores numbers. I want to take log to the base 2 of each of the numbers in that array and put it in file called result. I've used the following code to do it.

Code:

size=${#arrayini[@]}
for ((i=0;i<size;i++))
do
echo "scale = 12; l(${arrayini[$i]})/l(2)" | bc -l
done >result

It works fine but its taking pretty long to calculate since I've got about 230,000 items in the array. So I decided to store the result into an array hoping that it'd be faster. I tried the following code. arrayresult is where I try and store the result. The code doesn't work because of the second last line.

Code:

unset arrayresult
size=${#arrayini[@]}
for ((i=0;i<size;i++))
do
arrayresult[$i]="scale = 12; l(${arrayini[$i]})/l(2)" | bc -l
done >FILE2

There is a syntax error clearly.

View 6 Replies View Related

OpenSUSE :: Kmail Not Storing The Passwords?

Apr 5, 2011

In my recently installed openSUSE 11.4 system I am using Kwallet to store all of my private passwords and also those associated with my Kmail accounts. All of these passwords appear correctly in Kwallet, but it seems there is a problem with Kmail accessing them.Whenever I start a new session, Kmail loads first and is followed by Kwallet. When Kmail then tries to do its first mail retrieval it stops and asks for the account password. I type this in and then Kwallet requests its administrator password. Once I type this in, my mail is downloaded and I get no further request for the passwords during that session.

The same thing happens when I attempt to send my first email of the day. I get a Kmail request for the SMTP account password. I've tried changing the Kwallet settings so that it doesn't close when unused for a period,or when the screensaver kicks in, but this (predictably) has no effect. In the Access Control screen, both KDE Wallet Manager and Kontact are shown as 'Always Allow' and I can see no other settings in either Kwallet or Kmail which are relevant to the problem.My guess is that the problem occurs because Kmail starts up ahead of Kwallet and therefore doesn't load the passwords initially. But that may be a red herring as I'm not familiar with the way Kmail and Kwallet interact.

View 4 Replies View Related

Programming :: Python: Storing A Matrix For Later Use?

Apr 30, 2010

I'm writing a command-line flash card program in Python. I've tried many existing applications, but none fit my specialized needs.

All of the words I'd like to study are manually added to a text file (study.txt). Each time the software is loaded, it checks for new words in that file and also compares them to a dictionary (a tab-separated file, dictionary.txt), and adds that to a matrix. The flash cards are thus automatically generated from study.txt and dictionary.txt.

Now, the software must manage lots of information about each word I'd like to study and add new information made while interacting with the program (such as when that word should be studied next).

That seems easy to put into a matrix. But what is the best way to put that information in a place where I can pull it back when I run the software tomorrow? Do I need to save the matrix to a CSV file, then convert the CSV file back to a matrix the next time the application is run?

View 1 Replies View Related

Programming :: Storing Numbers In QByteArray?

Dec 15, 2010

I have a program that sends QByteArray datagrams over a udp socket. I would like to have 4 bytes of the datagram that contain a 32 bit integer. When saving numbers to the QByteArray, I have tried the static function number(int) and member function setNum(int), but they convert the integer to its decimal string representation and save that in the byte array. So if the number were 10, it takes 2 bytes, if it were 10,000,000 it takes 8 bytes. This wastes space, and makes it more difficult to get the number when it is packed with a few other pieces of data in the same datagram. Is there a standard way of doing this in Qt?

View 1 Replies View Related

Debian :: Creating / Storing And Executing Scripts

Sep 17, 2015

Here is my script to create a sitemap with wget:

Code: Select all#!/bin/sh

wget --spider --recursive --no-verbose --output-file=wgetlog.txt http://http://www.cyberciti.biz/
sed -n "s@.+ URL:([^ ]+) .+@1@p" wgetlog.txt | sed "s@&@&@" > sedlog.txt

I named it Nixcraft.sh and in /Home I had made it executable via the file properties. In the terminal I entered:

Code: Select all./Nixcraft
and got
Code: Select allbash: ./Nixcraft: No such file or directory

View 14 Replies View Related

Fedora :: Storing And Reviewing Printed Jobs?

Oct 12, 2010

I need to review what people are using the printers for at work.I was wondering how I can do this under fedora. I basically need to store a copy of the printed jobs and view them afterwards..

View 5 Replies View Related

Fedora Security :: Tweaks For Storing Information In Ram?

Nov 19, 2010

I've been looking for a tweak that would allow me to store temp and log files in ram. I've found a few that involved editing the fstab file, but they were either Ubuntu articles or they were over a year old and perhaps didn't apply to Fedora 14.I hear there is also a 'noatime' command that can help speed up processes by telling the kernel not to saved when files are accessed.And what are the advantages and disadvantages of noatime, and writing log/tmp files to ram?

View 7 Replies View Related

OpenSUSE Install :: Storing Files On A Bootable Usb?

Apr 8, 2011

Using imagewriter, I was wondering if it's possible to store backup files on it. I have a 8GB usb drive but the imagewriter uses less 2GB to write the iso to it.

View 1 Replies View Related

Ubuntu Installation :: Hangs At 74% - Storing Language

Apr 6, 2010

I'm trying to install Ubuntu server 9.10 x64 on the following hardware:

Amd 64 2.2 Ghz
Kingston Hyper x 1gb
PATA 160gb HD
DFI Lanparty Motherboard

The issue is that the install gets stuck at 74% - storing language.

I have tried different ISO's and burnt different CD's.

View 5 Replies View Related

Programming :: Parsing And Storing Multiple Values Using 'awk'?

Jan 24, 2011

I have a variable in which the data is stored as below:

variable_test=0m0.001s 0m0.001s 0m0.001s 0m0.001s 0m0.001s 0m0.001s .....an so on.

There are lots of values in format like "3m1.057s" are stored in variable_test separated with an space between two such values. For exapmple, value is "3m1.057s" I need to save different parts of a value in three separate array variables such as the

var_hour=3
var_min=1
var_sec= 057

tell if this can be done using "awk". A "WHILE" loop might be used to separate and store theses values I guess?

View 1 Replies View Related

Debian :: Create A Place For Storing Images?

Dec 26, 2010

I have 2 images stored temporarily in home folder totaling 21 gigs. I recieved warning stating that home disrectory is full.

I used gparted and resized extended partition and home partition. When I look at disk usage it still says that I'm maxed out in /home/edward. How do I increase my share as I have plenty of space. Or, can I create a place for storing images? Also the images were created and placed there using clonezilla.

View 8 Replies View Related

Software :: Audio Books Storing With Categorization

Apr 8, 2010

I'm starting to take advantage of a lot of the software packages that come with Ubuntu, and I am finding an abundance of software for just about everything. So far, the best application for my needs is the Calibre E-Book Reader, and I am wondering if a similar program exists for audio books. Something which would store them altogether, and categorise them by title, date, genre, author etc.

View 1 Replies View Related

Fedora Security :: KWallet Not Storing Gmail's Password?

Aug 26, 2011

This used to work in Fedora < 15. Whenever I want to send an e-mail using Gmail's SMTP server for the first time in a given session, the KWallet system asks if I would not rather migrate the password and store it encrypted inside a wallet. Every time I concur and every time an error message pops-up, as soon as I try and send another e-mail. The attached snapshot shows the error message I get. It doesn't matter how many times I select "Store Password". Every time the ordeal is the same. Up to Fedora 14 this method worked all right, but now it fails.

View 1 Replies View Related

Software :: Selecting 2GB Pendrive As The Target Storing Place?

Mar 30, 2011

I've accidentally deleted some files and now am trying to recover them using Photorec. I've created a separate partition to copy the recovered files to (3GB). When I run Photorec it only stores the first 5 files or so (totalling about 200Kb) and then stops reporting "no free space on the disk, select another destination". I've tried selecting my 2GB pendrive as the target storing place, but got the same error message.

View 1 Replies View Related

Programming :: Create A ZIP In Perl Without Storing Path Information?

Mar 1, 2010

I have the following code snippet:

Code:

my $file = 'test/mybigfile';
my $zip = Archive::Zip->new();
my $zipped = $zip->addFile($file);

[code]....

it simply takes a file (in this case, "mybigfile") and creates a ZIP file containing that file only. Now, my problem is that when I go to decompress the ZIP file, it creates the relative (or absolute, depending on case) path of the original file. To make an example:

Code:

$ pwd
/tmp/perl
$ ls -R

[code]....

What I need is *not* to store the path information inside of the ZIP file, so that once I decompress the ZIP file I only get the original one without having paths created.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved