We have Linux server in our environment for application development. In this server we mounted so many NFS share from Storage. Past few days we receive this error in
syslog kernel: nfs_statfs64: statfs error = 116
Some user fased this error "Stale NFS file handle"
Server info
OS= RedHat
Kernel = Linux hostname 2.4.21-47.ELsmp #1 SMP Wed Jul 5 20:38:41 EDT 2006 i686 i686 i386 GNU/Linux
I get this error which means I cant visit websites. I cant rm, cp, mv, vi, ... this file. How do I regain the ability to browse the internet? Is there a way I can create a /etc/resolv.conf2 and have my system use that instead?
View 4 Replies View RelatedI've got something showing up in my /mnt directory that I can't figure out how to get rid of. If I try to delete it, I get, "ERROR: Stale NFS file handle". I've tried googling it, but the only solution I can find is "remount and then unmount your NFS server". The trouble is that I don't have any NFS servers - it was a mountpoint for a squashfs file. Trying to remount the squashfile just gives the same error message. My best guess for how it was created is that maybe the file was deleted while mounted. Surely there is a way I can get rid of it? It stuffs up my system by e.g. preventing find from working. I'm running Puppy Linux 4.1.1, although I suspect that is irrelevant.
View 4 Replies View RelatedWhen I run lilo (/sbin/lilo), it messes up my /boot partition. Next time I try to mount it after running lilo, I get an error: "mount: Stale NFS file handle" (I define -t ext2). My /boot partition is ext2, mounted locally, and not nfs. Then I do fsck /dev/sda1, and I get several: Free blocks count wrong for group #0 (7665, counted=5063). Fix<y>? I say yes to all and it works normally afterwards. This happens only after I run lilo. Lilo is installed in MBR.
Here is relevant configuration:
Code:
root@darwin:/home/cabrilo# cat /etc/lilo.conf
append=" vt.default_utf8=0"
boot = /dev/sda
bitmap = /boot/slack.bmp
bmp-colors = 255,0,255,0,255,0
bmp-table = 60,6,1,16
bmp-timer = 65,27,0,255
prompt
timeout = 30
change-rules
reset
vga = normal
image = /boot/vmlinuz
root = /dev/sda3
label = Linux
read-only
This is my partition table:
Code:
root@darwin:/home/cabrilo# fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8f800200
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104422 83 Linux
/dev/sda2 14 144 1052257+ 82 Linux swap
/dev/sda3 145 3432 26410860 83 Linux
/dev/sda4 3433 19457 128720812+ 83 Linux
And this is my fstab:
Code:
root@darwin:/home/cabrilo# cat /etc/fstab
/dev/sda2 swap swap defaults 0 0
/dev/sda3 / ext4 defaults 1 1
/dev/sda1 /boot ext2 defaults 1 2
/dev/sda4 /home ext4 defaults 1 2
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
I did a backup of the ssd on my eeepc using the following command from a Linux Mint on a USB key:
dd if=/dev/sda1 of=/media/disk/eeepc_save/SYSTEM/system.bck
(/media/disk in an external USB disk)
I deleted the ext2 partition using GPartEd on live USB key and created it back. I rebooted Linux Mint and restored the filesystem using the opposite command :
dd if=/media/disk/eeepc_save/SYSTEM/system.bck of=/dev/sda1
I mounted /dev/sda1 and when I "ls" the root directory, I get several "NFS stale file handle" messages concerning directories (/dev and other). I tried "e2fsck -y", had a bundle of corrections that resulted in the deletion of the directories. I don't use NFS. I did the same for the user filesystem and had no problem (it's an ext3 partition). The two filesystems are the ones that came with the original Xandros installed on my eeepc and that were mounted with union-fs.
How do I delete a file if it happens like this.
-????????? ? ? ? ? ? temp.cgi
I currently have a home network setup so that my main machine shares it's external hard-drive via NFS. This has been working perfectly for months, however I just got a new laptop, installed openSuse 11.3 x64 and set everything up. Now there is two folders on the external network mount that won't let me do anything and always just return Networking: Stale NFS File Handle. The system still works fine under my old openSUSE 11.2 x86 laptop. I have tried unmounting the drive from the laptop, restarting the NFS client, and restarting the NFS server on the main machine. None of these have made a difference.
It is only these two folders that are effected. Everything else works just fine.
When using rsync to copy from one NFS mounted filesystem to another mounted NFS, rsync displays "stale NFS file handle" while attempting to issue a chmod after each file is copied. The files appear to be written successfully but the owner and group show up as "99." The source file system is mount USB ext3 drive and the target is a Buffalo TeraStation TS-XL/R5.
View 6 Replies View RelatedI have a 20TB filesystem, xfs formatted. The filesystem has been mounted with the inode64 option, and I now need to NFS export it. NFS doesn't like the inode64 option at all. The NFS clients cannot access any of the directories with inode numbers exceeding the 32bit limit. They get the "Stale NFS file handle" message. I have tried to attach the filesystem to a RHEL5.3 system, and after turning on the no_subtree_check option in /etc/exports on the server, it all works fine. No changes were needed on the clients.
The problem is that I need to get this to work on a RHEL4.4 system. Unfortunately I cannot do any test on that system yet, I then did a quick test on a RHEL4.3 system... and it didn't work. Even using the no_subtree_check option was on any help. I am afraid that this will not work on the RHEL4.4 system either. How to get the inode64 xfs filesystem NFS exported on a 2.6.9 kernel?
I've got a problem while accessing the /etc/sysconfig/network-scripts/ifcfg-wlan0 file, CLI's throwing: "Stale File Handle" - there's no access to this file. Problem is the same regardless wlan0 interface is up or down.
View 2 Replies View RelatedA FC10 server hung and had to be power-cycled. I suspect it hung because of an nfs mount timeout.
Now it does not boot. The error is libc.so.6 not found. Kernel panic. Attempting to kill init.
Booting under rescue:
ls: cannot access libc-2.8.so: Stale NFS file handle
Is there a way to reboot to a clean state? There must be some NFS cache file.
I also tried to cp rescueCD:/lib64/libc-2.8.so to the old lib64 dir, but get the same "Stale NFS file handle" message.
I was following the relatively simple instructions here for setting up a LAMP system. After having installed Apache2-related applications, I ran
# a2enmod expires
# /etc/init.d/apache2 restart
That worked fine. Then, a little later, after having set up a virtual host for my project website, and after installing PHP, MySQL and setting up a Mail Server with Exim, I rebooted and started getting errors when trying to start Apache:
Starting web server: apache2apache2: Syntax error on line 185 of /etc/apache2/apache2.conf: Could not open configuration file /etc/apache2/mods-enabled/expires.load: Stale NFS file handle
Now it seems as if there is nothing I can do with that file:
# rm -f /etc/apache2/mods-enabled/expires.load
rm: cannot remove '/etc/apache2/mods-enabled/expires.load': Stale NFS file handle
# cd /etc/apache2/mods-enabled/
[code]....
Is there anything I can do to refresh the NFS index so that it finds or removes this file? I'd be happy to just get rid of it. At the moment, I can't start Apache or anything because of it.
I have Puppy installed on an old laptop and one way or another I ended up with a file inside /usr/bin that has the Stale NFS file error. I've tried to look around for a way to fix it but all places I've looked have only been for the situation where it's on a drive you're able to unmount. At least I think they were. I certainly don't know what I'm doing well enough to know for sure. Obviously restarting the computer has been tried as well as attempting to unmount things, but I can't unmount the drive that is running the unmounting.
View 3 Replies View RelatedI'm trying to setup a small network between my old and new laptops to transfer my personal data. They are now linked with a crossover cable and they see each other.The old one has a dual-boot setup with WinXp and Ubuntu 9.10.The new one with Win7 and Ubuntu 9.10.I tried samba but it was very slow even using Windows in both computers: maximum transfer rates were about 1,5 Mib/sec.I tried SSH using ubuntu on both pcs and it is reliable and much faster, 5 Mib/sec. But I wanted more...I installed the NFS server on the old one and exported the NTFS partition where my data resides with sync and ro options.
I installed the NFS client on the new one and i'm able to mount the remote partition.Now, when I transfer my files I get very high speed, more than 10 Mib/sec but after a while I get a "Stale NFS file handler" error but I really didn't touch any file in the old pc and the connection is always up.Searching on the web I found that NFS had some troubles exporting NTFS partitions in the past but should be fully compatible with them since the last versions of ubuntu.
Trying to split a wavpack on Ubuntu 10.04. I tried: Code: cuebreakpoints Disk3.cue | shnsplit -o flac Disk3.wv It gives an error Code: shnsplit: warning: none of the builtin format modules handle input file: [Disk3.wv] shnsplit: error: cannot continue due to error(s) shown above I already have wavpack 4.60.1-1 installed. Any ideas why shnsplit complains about not seeing wavpack?
View 4 Replies View Relatedwhen i am using traceroute command, it is giving the erro as follow: traceroute [URL]: Temporary failure in name resolution Cannot handle "host" cmdline arg [URL] on position 1 (argc 1)
View 2 Replies View RelatedLast night I used Nautilus to FTP a couple of files to my web-site, it worked fine and I created a bookmark for it. Today, with no changes to my system, it refuses to do it showing the error message in the title of the post. I thought that maybe my bookmark was corrupted so I tried File>Connect to Server using FTP with login. Just after entering my password I get the error message. I'm using Maverick. My Internet connection is working well. What the heck is going on?
View 2 Replies View RelatedNeed to handle SIGSEGV error when pbuf size is less than size. inside lib.:
for (i = 0; i < size; i++)
pbuf[i] = i;
I'm new to php and need some pointers to worth while documentation 'cause I'm getting nowhere I want to make a simple html form that allows me to submit a csv file so that I can work on it.The problem seems to be that if the file is not in the root of the (web) application it won't work.The form doesn't seem to send the path with it so I am unable to (1) know where the file is, I just get the name of the file and (2) I couldn't access the file anyway as it's outside of the apache environment.Is there a way to up the file to memory? How would you do this
View 3 Replies View Relatedhow to handle non argument error while adding two alphabets using 'expr' (not bc).
View 1 Replies View RelatedHas anyone else experienced issues with this option? Using the tweak tool from Malcolm's repo. If I set it, it works in the current session. But after logout, I can't login again. At login the desktop appears briefly then closes back to the login screen.
View 9 Replies View RelatedFor the past several days the Package Updater has popped up wanting me to install an update to iceweasel. Each time I try to do the iceweasel-31.8.0esr-1-deb8u1 (64-bit) I get the following error message:
E: Internal Error, ordering was unable to handle the media swap
Is there something I need to do?
I get a Mount,Computer location error and will not mount any drives but boot! When I go to places->Computer on Linux Ubuntu 9.04 and I compiled gmp-4.3.1 and mpfr-2.4.1 last because I wanted gcc-4.4.1 to code and will not compile also gcc error not installed gmp-4.3.1 and mpfr-2.4.1. On screen is...
Could not Desplay "computer:". Nautilus cannot handle "computer" locations
I am trying to use rsync to keep 2 machines in sync. I get the following error sometimes. If I rerun the rsync it usually works.
IO error encountered - skipping file deletion
I am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
There is not a lot of info on that command, I didn't find a manpage nor a info and not more than examples on the web. Is there any tutorial or info on internet?
View 2 Replies View RelatedI've been trying to understand issues that occur during a uClinux distribution build (so I can include such issues in a module I'm writing for students). My process has been to work through errors that occur due to missing packages, then remove the distribution and build it again to uncover what happens.One thing I notice is different sets of warnings within each iteration of making a new build. From the document here (URl...it states, "A typical warning involves a variable being used before its value has been set."
So my question: is there a way to verify that the issue throwing the warning has been resolved by the end of the make build?And, is running make build again an option or could this cause problems within the build directories or image?
I'm currently stuck at 6.13 GMP-5.0.0 of the LFS installation. After running make, I receive the following:
error while loading shared libraries: libbfd-2.20.so: cannot open shared object file: No such file or directory
make[2]: *** [libmpn.la] Error 127
make[2]: Leaving directory `/sources/gmp-5.0.0/mpn'
[code]....
error message when I ran my program that I couldn't open my local file. I have two files first one is called client, second one is called server I am using named pipes to sent a message from client to the other file called server in client I used mknod() to create the two named pipes,one for read,one for write and created new thread in client using fork() spawned a child process that executed the server file both named pipes are opened the client file got the message from the user and sent it through the named pipes to the server file when the server receives the message , it needs to verfify it is correct in the server file, a local file descriptor is created to read and send this verifing message when it is not correct but I am getting an OPEN() error when I tried to open this shared local array buff and attach it to a file descriptor where the message is kept why do I get this error in server file
int main()
{
/*both named pipes are open*/
rfd=open(IFIO1,0);
wfd=open(IFIO2,1);
[code]....