When i restart the squid service, the following error has occured
Code:
2010/10/04 12:14:14| Squid is already running! Process ID 3941
FATAL: setrlimit: RLIMIT_NOFILE: (13) Permission denied
Squid Cache (Version 2.5.STABLE14): Terminated abnormally.
[code]....
I installed squid 2.6.stable21 on centos 5.3,it starts normally from /usr/local/squid/sbin/squid but when I start form init.d it is running but display message.
/etc/init.d/squid start then displays
Starting JunkBuster & Squid 2010/08/02 19:05:52| ACL name 'all' not defined!
FATAL: Bungled squid.conf line 179: http_reply_access allow all
Squid Cache (Version 2.6.STABLE21): Terminated abnormally. [FAILED]
I installed squid cache on my ubuntu server 10.10 and it is work fine but i want to know how to make it cache all files like .exe .mp3 .avi ....etc. and the other thing i want to know is how to make my client take the files from the cache in the full speed. since am using mikrotik system to use pppoe for clients and i match it with my ubuntu squid
View 1 Replies View RelatedI recently finished installing Squid 3.1.9 and I think I've done installing correctly with its feature of minor configuration changes. It accepted requests on port 3128 and created and the created some numerical or binary (I guess) files in /usr/local/squid/var/logs, My problem is how can I fully verify if the cache is really storing Internet Files? I've read some forums in the Internet replied to me to try the command: cat /usr/local/squid/var/logs/cache.logSo I did tried it and it gives me this output:
2010/11/11 18:04:49| store_swap_size = 0
2010/11/11 18:04:50| storeLateRelease: released 0 objects
2010/11/11 18:05:41| Squid is already running! Process ID 5458
[code]....
I'm using squid as a proxy in our organization. My problem is whenever the squid cache folder size exceeds 3 GB our proxy server starts to hang. Is there a way to write a script that it will automatically delete the squid cash when it exceeds the 3GB limit.
View 7 Replies View Relatedim using a lease line on real ip for internet connection in my office.i have shared my internet conetion with a squid 2.6 stable6. i m having almost 200 pc in my office.since last few days my squid is creating a problem.as soon as i restart it ,it work fine but after a few minute it becomes extremely slow ..it almost dies.when i go to its cache log i found the error that your cache is running out of file descriptor...once i increased the no of file descrptor from 1024 to 4028 , the problem temporaily sorted out but after a few days same problem is repetaed ....and still the problem exist
View 3 Replies View Relatedfirst i'm new in this filed of linuxi have Debian 5 serveri need to know how build squid and cache in server
View 1 Replies View RelatedI want to know that is there any way to check that how much size of squid cache directory is full? Normally when squid size will reach upto 2GB then I have to clean it.
Code:
# cache_dir ufs /var/spool/squid 2000 16 256
I assign 2000 MB to the cache size. One month have been pass while squid is running but i am unable to know how to check the current status of my squid cache size
I am using squid on my cent os 5. The cache directory is almost full.
Code:
# cache_dir ufs /var/spool/squid 1000 16 256
kindly guide me how can i flush or clean the data inside the cache directory of squid using terminal
is there any way to scheduled cache clear auomatically instead of manual in squid.
View 1 Replies View Relatedi Have a Squid Server , i'm Using That for Caching ... i Have 3 Ether on My " Squid Server ". Ether1 : Directly Internet From ISP1 , 2Mbps . Ether2 : Directly Internet From ISP2 , 512 KBps . Ether3 : Connected too LAN . i want All The Files Format with " MP3 , RAR , ZIP , AVI , ... (All Downloads File) " Get From Ether1(ISP1) and WebPages Like " HTML , ASP , CGI , & ... " Get from Ether2(ISP2) i Not Know How to Configure That with My 2 ISP internet.
View 1 Replies View Relatedwhat i need, I got two servers for about 4000 users and 300 servers and well the guy never setup dns caching right, so im redoing it. Now my goals
1) DNS cache
2) Transparent Squid Cache only
3) Load Balance - at switchlevel
Upgraded Hardrives to SSD 2x32gb each server 4gb of ram 2x Dell poweredge 850's - p4 2.8 (single cores) So any advise , pointers , expeirnces and best ways to do this being both server will do both dns caching and squid! Also is bind9 the best for this?? i seen stuff about DNSmasq what performs better( i dont need DHCP)
I am using Cent Os 5. I want to know that is there any way to check that how much size of squid cache directory is full? Normally when squid size will reach upto 2GB then I have to clean it.
# cache_dir ufs /var/spool/squid 2000 16 256
I assign 2000 MB to the cache size. One month have been pass while squid is running but i am unable to know how to check the current status of my squid cache size.
I have installed debian to run Squid cache as a caching proxy.
Ive been bashing away now for 2 days and i have managed to install squid (i first tried manually, but that did not work so i used synaptic software packager to install it (from Administration menu)
That went well, thereafter i installed webamin to work with squid in a GUI
I have managed to start squid and added my range of IP addresses to the ACL list
I have added the proxy restriction too.
Now, i tried to test it.
I opened Iceweasel Web browser (on the same machine) and setit to use the Proxy server: localhost and port:3128
That works fine.
But when i try to change the proxy setting to my machines ip (where squid is installed) :
Proxy server: 10.0.0.35 and port:3128
That does not work.
Am i missing something, please help
I then tried to set another windows PC on the network to:
Proxy server: 10.0.0.35 and port:3128
That also does not work.
I also edited the conf file to http_access allow all, but i do not know if i have doen it correctly, but maybe there is another problem?
Squid servers cache size ondisk automatically increasing and decreasing,how I would resolve this issue
View 6 Replies View RelatedI'm running GNU Emacs 23.1.1 on "Ubuntu 10.04.1 LTS" and any search I perform using the built-in M-x rgrep on the standard Linux kernel source code (vanilla) ends prematurely with the following error printed to the emacs echo area:Grep exited abnormally with code 123.I have been seeing it for a while on Redhat systems as well, and with other (large) code bases.
View 2 Replies View RelatedI am reading slab allocator, it defines slab cache, i am quite confuse is it same as hardware cache?
View 2 Replies View RelatedOne of our user inform me about some problems in viewing one site that he does not get fresh objects from site's server while site is updated everyday!! After some investigate and dig on headers I get, I found out in response headers that "date" field is for 2 or 3 last week!! 1- Does Squid cache "response headers" ?If so, when user send "If-none-match" or "if-modified-since" in request header the cached "response header" will be updated?
View 1 Replies View RelatedI'm looking to upgrade squid 3.0.x to the latest version 3.1.x. Is there a way of doing it without losing the current configuration ? The installed version was done using the binary package (rpm) and not compiled from a tar package.
View 8 Replies View RelatedI am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
I'm trying to install centos 5.3 as part of AsteriskNow 1.5 on a SuperMicro server with main board type X5DA8 The anaconda fails with the following text visible:
[Code]....
Other terminals (F3 and F4) don't appear to have any interesting information on why it barfed. I tried it with a text install too, much the same result. I get this error with other Centos 5.n based Asterisk and GUI bundled mini distors too, specifically TrixBox
Not doubt this sounds alarmist, and perhaps it is... anyway, earlier tonight my mum complained that her home network connection wasn't working. After complaining about Windows and running a virus scan, I returned to my laptop, only to find my Ubuntu 10.04 was having the same problem. Then I noticed the wireless connection light (next to send and receive, which always blinks anyway) was constantly flashing, as if transmitting data, even though neither of us was connected, of course. I turned the router off and on again a few minutes later. Initially the light was still blinking abnormally, but I could now access the internet, as could mum, so I ignored it.
Later on, while the virus scan on mum's computer was running, Windows notified her she was running out of hard drive space - normally about 30GB of the 51GB HD is used on her laptop, but suddenly 50GB had been used. I also noticed my 275GB Ubuntu partition had 235GB free (although total size of files on disk was 128TB - a bug perhaps?), i.e. 40GB used, which seems pretty large for a rather fresh install and a handful of documents!Currently, everything's normal where my router's concerned (no blinking lights except for my browsing), and my Lucid partition is still showing 235GB free (strangely, mum's laptop now shows 46GB used instead of 50GB). So, what do we make of all this? Were our computers hacked for storage space?
I don't understand this error nor do I know how to solve the issue that is causing the error. Anyone care to comment?
Quote:
Error: Caching enabled but no local cache of //var/cache/yum/updates-newkey/filelists.sqlite.bz2 from updates-newkey
I know JohnVV. "Install a supported version of Fedora, like Fedora 11". This is on a box that has all 11 releases of Fedora installed. It's a toy and I like to play around with it.
I was laughing about klackenfus's post with the ancient RH install, and then work has me dig up an old server that has been out of use for some time. It has some proprietary binaries installed that intentionally tries to hide files to prevent copying (and we are no longer paying for support or have install binaries), so a clean install is not preferable.
Basically it has been out of commission for so long, that the apt-get upgrade DL is larger than the /var partition (apt caches to /var/cache/apt/archives).
I can upgrade the bigger packages manually until I get under the threshold, but then I learn nothing new. So I'm curious if I can redirect the cache of apt to a specified folder either on the command line or via a config setting?
I know a program running in the background can be brought to the foreground by typing 'fg'. So, if
command_line &
really runs the program in the background, my question has just been answered. But then all reduces to this question (yeah, I know; but I'm asking in earnest): does the ampersand sign make the program run in the background?
my host is x86_64 and run hosted redhat server5.4 X86_64, i complies my code with -m32 option open, my code run smoothly in my host, but when it installed on redhat9.0 host(x86_32) the error occurs and the output is :"Program terminated with signal SIGFPE, Arithmetic exception" but thought whole my code, there no divide operators,i write the "hello world" program, the same problem also occurs
View 1 Replies View RelatedI installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
i was looking for a way to stop my menus taking a few seconds to load my icons when i first open them and found a few guides suggesting using the gtk-upate-icon-cache command, but with the any colour you like icon theme i'm using (stored in my home folder .icons directory) i kept getting a "gtk-update-icon-cache: The generated cache was invalid." fault i used the inbuilt facility in the acyl script to copy the icons to the usr/share/icons directory and tried the command again, this time using sudo gtk-update-icon-cache --force --ignore-theme-index /usr/share/icons/ACYL_Icon_Theme_0.8.1/ but i still get the same error. i tried with several of the custom icon themes i've installed and only 1 of the first 7 or 8 i tried successfully created the cache.
View 4 Replies View RelatedWhich LXDE version of Linux has the newest version of Firefox and Open Office included?
I am looking for an iso file, and I am trying to run this off of a live CD for now. So I want a light version of Linux, probably LXDE, or if not, then probably XFCE. But I need a new version of Firefox and OpenOffice included.
Because, I tried burning the customizable NimbleX @ custom.nimblex.net . Pretty good, except it uses Firefox 2, and Open Office 2.3, which are outdated.
And I tried Mint XFCE, which might have been pretty good too, but it had some issue of blanking and requiring relogin after I opened hotmail frequently (user id: mint, password: blank).
The web browser and the word processing program are the most important and essential applications to me.
So are there any Linux versions in LXDE on LiveCD that include newer versions of Firefox (or at least another good browser) and Open Office (oo seems better than abi)? (Again, if no LXDE, perhaps XFCE?)
I just want to download a good version in an iso file, and burn it to a CD and get to work. Like I said the web browser and the word processing program are all important.
So really, what iso/LiveCD versions are the fastest for running on an older system, and yet have the newest browser and word processor included?
I have been using GPRS on a Nokia 6230 on PCL 2009 for months, no problems. Got the C5212 2 days back. First, it would not connect using the old wvdial.conf file (the modem was detected on the same ttyacm1 port), throwing up an error I don't recall now. Then I did a wvdialconf, and edited the resulting file, and this time I got an error "Voice line detected".
The phone came with the windows software, so tried getting online on a Win install. The phone connected, but the procedure involved disconnecting the phone (as described by the software itself). Assuming this "disconnection" could be a reason for wvdial to fail, I tried again on Linux. This time I could get online, without a hitch.
Yesterday, I abruptly started facing a new problem "LCD Terminated by Peer". I had used the phone error free for more than 2 hours. Then I disconnected and plugged it again, and voila the error! I have looked at many sites and their solutions. None of them seem to change this situation. The most popular tip is to comment out all lcp related lines in the /ppp/options file. I am using wvdial and kpp, and my options file did not have those lines in the first place.
