General :: Partitions Do Not Match The Way Configured Them At Install?
Oct 24, 2010
On my last install I put Drive one windows on the first partioncreated a swap partitionlinux on the third partion rive twoLinux on the first partiton Grub found an old windows and made a menu for it So why does sfdisk -l return this? Code: Disk /dev/hda: 19457 cylinders, 255 heads, 63 sectors/trackUnits = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/hda1 * 0+ 2549 2550- 20482843+ 7 HPFS/NTFS
/dev/hda2 2550 10388 7839 62966767+ 5 Extended
Code: $sql="SELECT table1.datetime, table1.user_id, table2.ip, FROM table1,table2 WHERE id='$id' AND (table1.id = table2.id AND table1.datetime = table2.datetime)";
In table2 the datetime fields are about 1 to 2 seconds off due to the source of the data, which I cannot change.
Is it possible via a query match table1.datetime & table2.datetime by HH:MM (ie. to the minute instead of to the second)?
I have vista and opensuse 11.2 on my computer, the problem is i can't open ext3 partitions from vista but i can the other way. I tried Ext2fsd but the linux partition is always in a read only mood even when i change this option. Also, all folders are empty I downloaded the program as admin and compatable with XP SP2.
I've been trying to install Linux as a dual boot with Windows 7 on my Dell latitude e6510.It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux.The issue I'm having is that when I run Linux installers by boot from CD they see the entire hard drive as unallocated space. I have tried Ubuntu 10.10, Kbuntu 10.10 and Fedora 14 and they all have the same problem.I have also tried the Ubuntu "install in Windows" option and could not get it to work.EDIT:Booting Gparted 0.8.0 from a usb drive did not work. It reported the entire drive as unpartitioned.
I just got an hp dv4-2145dx and I am attempting to install ubuntu 9.04. I understand that the maximum number of primary partitions is four. The four on this hard disc are the windows one, a tiny one called hp tools, another tiny one called SYSTEM and then the recovery drive. Does this mean that I will be unable to install linux without deleting one of these partitions? Are they all necessary? deleting any since I don't know what they do.
I have one doubt regarding minimum partition required to install linux O/S to the best of my knowledge, "/", "swap" & "/boot" are the essential partitions required for installing Linux, but i think linux should also work without "swap". please suggest or correct me if I am wrong
im trying to install ubuntu 11.4 onto an xp laptop with 3 partitions, c, d, e and i would like the 11.4 on the d partition but i get to the point where it says the partitioning thing but cant figure how to place it in the (d) ,
After installatiion, if you find that you can't connect to your box over ssh, you might find that the service has not been started. Start it with the following from a root prompt: /etc/init.d/sshd startIt will then proceed to create the needed keys forecuring connections and proceed to start the service allowing connections.
I will install Slackware 13.1 on my desktop in 50 GB of disk space but I'm not sure about the proper size for the partitions "/" and "/ usr / local". I want to use most of the space for "/ home" partition, so I can keep my data when I upgrade to a newer version (right?)
(1) What is the difference between OpenSuse and Suse Linux Enterprise Server (SLES) ? I see there is a link to download SLES in the Novell site. Will we have to buy SLES after 60 days for us to continue to use that OS ?
(2) I see this link Software.openSUSE.org
There is this link to download 4.7 GB DVD of Opensuse. Does that mean we need not have to download any packages from this repository, ndex of /distribution/11.2/repo/oss/suse/i586
For installing Oracle on Opensuse 9 I remember I had to install many of those packages on my laptop.
Do we still need to install those packages ?
(3) I have to install this SUSE (either Opensuse or SLES) on my laptop. My Laptop is Compaq Presario CQ60.
Can I connect to Internet if I install this software ?
Last time I faced lots of problems. I thought some laptops cannot be configured to Internet if installed with Linux.
I just installed OS 11.4 in my own language; i regularly set it in the options, but it still shows english menus (only firefox is in my own language...)
seemed to have buggered up installing netbeans on my slackware 13.0 machine. I got the source (the zip file), which i copied into the extracted slackbuild, then did a
Code: ./netbeans.SlackBuild
It all seemed to work fine, at the end it told me my package could be found in /tmp. So i went there and did a
I think the installation caused the corruption of the partition table. I removed the last 3 logical partitions and gparted correctly reported the 2 remaining distros and the swap. The problem hopefully will be solved when I reinstall those distros. I have a 160 gig HD with 3 Linux,1 swap,and a Windows partition. I attempted to install PCLINUXOS unsuccessfully. When I rebooted I had the same grub. I checked gparted and it indicated all 160 gigs as unallocated. fdisk shows the partitions. and indicates one partition as empty where I attempted to install PCLOS.
No problem in accessing any of my distros, but currently I can't make any changes to my HD. I've tried parted magic and there was no solution there. I have been unable to download the Ubuntu Rescue remix. Is there a way to restore? I haven't used fdisk or cfdisk for that purpose. I am beginning to think I would need to delete all of the partitions in the extended. FDISK omitting empty partition (8)
i have just installed Ubuntu on my new pc. i used the wubi installer in win7 i rebooted to Ubuntu and continued the install. however at the moment i have very low bandwidth and decided to skip a few steps in the install i only did it because i would have to wait over 8 Hrs for it to complete. APT is not fully configured and no updates were downloaded. once my bandwidth is restored how do i reconfigure APT and fix any broken packages/missing stuff from the initial install?
I'm trying to setup Baldur's Gate in Wine and it's giving me this error: "There is no Windows program configured to run that type of file". I've enabled the file to be allowed to run as an executable, and the program is completely uncorrupted - I just installed it on another computer with Windows.
Quote: Originally Posted by Computerphile Personally I haven't tried anything better than Wine (if you exclude proper virtual machines), but whenever I look for alternatives to something I hit up AlternativeTo.net or Wikipedia's See Also section. Looks like there are some alternatives.
Edit: Though, if you let us know exactly what software (except for Format Factory) you have problems running in Wine, I'm sure the community can give you some proper Linux native alternatives. another major compatibility issue with wine is that i can't install canon pixma ip1300 printer drivers. no idea of installing printer in fedora.
[code]...
I have no experience with anything but standard Wine, and I haven't even used that in quite some time. Crossover and Cedega are both built off of the Wine codebase, and they both cost money. can POL do everything that wine can do? in other words, do i need to install them both or POL will do good alone?
I have 64 bit processor and 64 bit compatible CentOS 5.5 distribution, but some times when I run yum info, I get information about both 32 abd 64 bit installed packages:
For example when I reinstall selinux I see that previously I had both archetecture match packages version:
Reinstalling:
My question is: Is there some rpm or yum configurable option to strict installation to some archetecture, that, that when rpm/yum will try to install package for i386 when it prohibited I will get some error?
When we install a linux OS, we've an option to create partitions. In my laptop I've create partition for /opt, /home, / and /tmp. Are these partitions the same type of partitions as the partitions created by LVM?
I have an ARM system that has been pre-loaded with some variant of Linux. I don't know the distribution; I can only see the kernel number in dmesg.
In /etc/network/interfaces, I set eth0 to auto eth0 iface eth0 inet dhcp
After I save and reboot (or run ifdown eth0 followed by ifup eth0), I can see that the networking system is searching for a DHCP server and actually obtains a lease on a valid IP address, but when I run ifconfig, the interface has not been assigned the address that it pulled down from DHCP. It has been assigned a 192.168.. address.
I noticed in dmesg that a variable "ip" is passed to the kernel at boot with the same address that is overriding my DHCP address. How can I disable this overriding behavior? I noticed a dynamic environment variable in u-boot called ip. I set it dhcp and saved it to nv storage, but the problem persisted. I tried to set the u-boot environment variable ipaddr to dhcp, but was informed that this wasn't a valid value for the variable.How can I get the interface to be configured through DHCP?
I am using sed to process an ascii tcpdump file whereby each packet is processed into a line with the same number of columns and useful information is pulled out like the time, packet type, length, and also IP addresses, payload type and port numbers where appropriate. The time is already changed to seconds, followed by the protocol over ethernet, such as IP, IP6, ARP etc. and I can change anything it detects as IP, IP6 and ARP into some other string, pulling out necessary information depending on the protocol and payload.The beginning part of the search for IP starts with the sed search /([0-9][0-9]*.[0-9][0-9]*)[ ]IP[ ,] ... /, where time is in seconds and ellipses means more stuff, and likewise for IP6 and ARP.But how do I process the lines that are NOT IP, IP6 or ARP? (Specifically NOT /IP[ ,]/, /IP6[ ,]/ or /ARP[ ,]/.) So that I can format them into a string with the same number of columns.
I have recently installed ubuntu 10.04 on my five year old desktop. Unfortunately, the official linux driver for my ATI X1600 card doesn't seem to support this ubuntu. There's an open source driver running now, but 3D applications run much slower than originally under windows. (which I can't seem to install on my sata raid harddisk anymore)
It's even so slow that I can't use those 3D applications anymore. I came to the conclusion that my computer is just too old for such a modern system as ubuntu 10.04. So I started looking for another version of linux. I tried the Linux Distribution Chooser, it pointed me at OpenSUSE 11.2. But I don't know, this program still looks kind of new. Too new for my computer.
I think that my computer needs an older version of linux, so that all the hardware will work properly. So I'd like to know if there's an older version of ubuntu/linux that still supports my hardware.
My computer was assembled from the following parts: - DVDI LiteOn 16x/48x IDE bulk - RAM 512 MB DDR/400 PC3200 ValueSelect - HDDI 200GB 7200 Maxtor 6B200M0 8MB/SATA - MB MSI k8T Neo2-F Athlon 64/939/DDR - CPU AMD Athlon 64 3200+ 2.0Ghz/so939 BOX - X GRA Sapphire R9600XT TV/DVI 256MB L-re
Does anyone know any distributions that fit this hardware? Some older versions of ubuntu perhaps? Something that allows me to install drivers that make 3D applications run a t normal speed? If someone knows about a Distribution Chooser that takes hardware into account, I'd also like to know.
Is it possible to configure yum so that it will download packages from repos using wget?Sometimes in some repos yum will give up and terminate for "no more mirrors to retry". But when use "wget -c" to download that file, it will be successful
