Software :: How To Force Yum And Rpm Install Only Current Archetecture Match Packages
Aug 13, 2010
I have 64 bit processor and 64 bit compatible CentOS 5.5 distribution, but some times when I run yum info, I get information about both 32 abd 64 bit installed packages:
For example when I reinstall selinux I see that previously I had both archetecture match packages version:
Reinstalling:
My question is: Is there some rpm or yum configurable option to strict installation to some archetecture, that, that when rpm/yum will try to install package for i386 when it prohibited I will get some error?
View 8 Replies
ADVERTISEMENT
Aug 10, 2010
seemed to have buggered up installing netbeans on my slackware 13.0 machine. I got the source (the zip file), which i copied into the extracted slackbuild, then did a
Code:
./netbeans.SlackBuild
It all seemed to work fine, at the end it told me my package could be found in /tmp. So i went there and did a
Code: root@slackLap:/tmp# slackpkg install netbeans-6.8-i586-1_SBo.tgz
Looking for netbeans-6.8-i586-1_SBo.tgz in package list. Please wait... DONE
No packages match the pattern for install. Try: /usr/sbin/slackpkg reinstall|upgrade
ps i'm running 32bit slackware 13.0
View 3 Replies
View Related
Aug 2, 2011
i did an install of squeeze without selecting anything during tasksel. after install i changed my sources to testing, updated, and did a dist-upgrade. i then installed xfce4 and xfce4 goodies. i noticed some of the xfce4 packages have the current state 'pa'. for example:
[Code]...
this makes me worry some things didn't install all the way, because if i did aptitude install xfce4-power-manager it would install it and leave make the current state 'i'.is there anyway to install all the packages labeled 'pi'?
View 3 Replies
View Related
Aug 13, 2011
I have installed Ubuntu 11.04, 64 bit and now I am trying to install/configure MFC-7420 scanner part (printer works fine)I tried to follow the steps listed at http://ubuntuforums.org/archive/index.php/t-590793.html, but I don't have etc / udev / rules.d/45-libsane.rules file to edit and can not continue with the remaining steps of the guide.
I also tried to follow the steps provided by the Brother Solution Center http:[url].... I have downloaded brscan2 64 bit and installed without error but when I tried to install the brscan-skey-0.2.1-3.amd64.deb using >sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb I get the following error:
************************************************** **************************************************
sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb
[sudo] password for aUser:
dpkg: warning: overriding problem because --force enabled:[code].....
Which dependencies am I missing? or What am I doing wrong?
View 1 Replies
View Related
Aug 24, 2010
I've got a ~/.Xdefaults that has a specific color theme defined for Xorg, and this works. I've got a ~/.XdefaultsNew that specifies an alternate color theme. Xorg starts and loads ~/.Xdefaults which is correct. After running some applications, I run
xrdb ~/.XdefaultsNew
This overrides all my X resources to the new defined values (correctly). If I open a new window, the theme is seen correctly. However, all the previously opened windows retain the original theme.Is there a way to force X to "re-theme" all windows it is managing with the currently loaded X resources?
View 1 Replies
View Related
Jul 26, 2010
I am just too tired and am missing something in the man pages for aptitude and not getting my search terms right but I can't seem to find a way to make aptitude ignore a couple of supposed broken packages (they work just fine by the way). The only way I can find to remidy the situation is to remove those couple of packages or upgrade several things to their Squeeze counter parts. I really don't want to try and do the upgrade as at home I am stuck on a 56k connection. Removing the broken packages I guess won't be too bad if I can find the debs again after I install a couple of things I want to add to my system. I would however just like to make aptitude ignore the state of my system and try to install what I want anyway.
View 14 Replies
View Related
Nov 6, 2009
for a x problem I reinstall the complete x packages. I remove some packages with force.Before this yum works perfect. Exact at this time we have problem with our internet connections and yum hangs somewhere when yum load the repositories and or start the update process.Now yum hangs at start from the command. I can start yum some times and no locking error is rise.strace brings:
stat("/var/lib/rpm/Packages", {st_mode=S_IFREG|0644, st_size=79855616, ...}) = 0
open("/var/lib/rpm/Packages", O_RDONLY) = 4
fcntl(4, F_SETFD, FD_CLOEXEC) = 0
[code]....
View 3 Replies
View Related
Jul 10, 2011
A couple weeks ago I became fed up with using Backtrack5 as a primary OS, as fun as it is, and installed Kubuntu 64-bit for AMD on a laptop with an intel chip. I didn't see an intel iso on Kubuntu's site right away, and I suppose I was too excited to try it to care. I have been having some problems with plugins working correctly, but i'm not even sure this architectural mixup is to blame for that.
To cut to the chase, should I be worried about installing kubuntu that was intended for AMD on a board with an intel chip? I figure i havent really done anything I can't easily redo yet, and if I want to reinstall, i'd like to do it before I cross that bridge!
View 1 Replies
View Related
Jul 21, 2011
I was working on my flash drive install of Ubuntu, when I squashfsed my /usr. Long story short, I some how ended up with a working /usr, but with a few packages marked as installed, but not having its components installed (emacs). When I try to remove emacs (emacs23-nox), it gives me numerous errors about files (all relating to emacs) not existing (all in /usr). Thus my questions are as follows:
1) Is there a way to force the removal without it caring about missing packages?
-OR-
2) Is there a way to reload which packages are installed by checking which files exist, etc?
-OR-
3) Should I just nuke and re-install?
View 1 Replies
View Related
Sep 25, 2010
is there a way to have reposync replace packages with the most current versions? because when i do it for my "network repo" it seems to just add more and more.
View 3 Replies
View Related
Mar 1, 2010
Best way to go about upgrading current with Eric's 4.4 packages installed. It looks like some of the changes in current are newer versions than what I'm running with the 4.4. packages installed so I'm not real sure of the best path to follow . Would it be better to just blacklist the 4.4. packages and proceed with the upgrade or does somebody else have a better idea?
View 2 Replies
View Related
Oct 21, 2010
I have the following query:
Code:
$sql="SELECT table1.datetime, table1.user_id, table2.ip, FROM table1,table2 WHERE id='$id' AND (table1.id = table2.id AND table1.datetime = table2.datetime)";
In table2 the datetime fields are about 1 to 2 seconds off due to the source of the data, which I cannot change.
Is it possible via a query match table1.datetime & table2.datetime by HH:MM (ie. to the minute instead of to the second)?
View 1 Replies
View Related
Apr 7, 2010
I just thought I would post this file since I was doing it for myself. This is the stock /etc/slackpkg/blacklist file with AlienBOB's multilib and kde 4.4.2 packages added. If I screwed something up please let me know!
Code:
# This is a blacklist file. Any packages listed here won't be
# upgraded, removed, or installed by slackpkg.
#
# The correct syntax is:
[Code]...
View 7 Replies
View Related
Apr 30, 2010
I have a new install of Slack 13 and upgrading to current will break a lot of things for my 4 year old son (he's a gnome guy, what can I say). I will be using this machine too, and I NEED KDE, but of course the stock KDE packages are unstable to say the least. I know I've seen people talking of downloading upgraded kde packages for slackware 13, but when I google, I find a lot of things complaining about the stock KDE and of course Eric's packages for current.
View 2 Replies
View Related
Apr 28, 2010
I understand it is not generally a good idea to mix 13 and 13-current packages but I am installing OpenProj which requires JDK and the installed JRE (6-18) is up-level from 13's JRE (6-16) and back-level from the 13-current JDK (6-19). Presumably JRE and JDK should be at the same level. Would it be better to take both JRE and JDK to 13-current (6-19) or to take both to 13 (6-16)?
View 3 Replies
View Related
Dec 22, 2010
When I tried to upgrade (update) current packages list in my synaptic I got error messages about unresolved gpg keys as following:
Code:
How I can get all missed keys for completing update process?
View 7 Replies
View Related
Apr 30, 2010
Whenever I do sudo apt-get or use the Ubuntu Software Center, I can't download anything because a message comes up saying "Action requires installation of untrusted packages: The action would require the installation of packages from not authenticated sources." I've been trying to download GIMP and Thunderbird, so... I dunno what the problem is.
View 8 Replies
View Related
Aug 31, 2011
I just upgraded from 11.2 to 11.4 and the installation/upgrade worked just perfect. I than followed the instructions in the "New User How To/FAQ", "Multimedia and restricted format" post. I was following the instruction in the 11.4 section. I added the additional repositories as explained. I then was on the section where it talks about going into software management and selecting the "Packman" repository and clicking to "switch systems packages" to the versions in this repository (packman). I than click this link and the "warning" screen appears and I am present with conflict resolution after conflict resolution dialog. It just seems that there are some many conflicts, it just seems wrong and I canceled.
The installation/upgrade appears to have worked just fine. My mail is there, audio and dvd play back worked the first try after the upgrade. I am not clear if this is what I should expect or their is something wrong or if I even need to complete this step for a successfully installation.
View 3 Replies
View Related
Mar 31, 2011
im using fedora 14 and i have a slow internet connection. i want 2 install some packages from the fedora 14 dvd instead of downloading from internet using add/remove packages. i tried to edit /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo but it dint work.
View 2 Replies
View Related
Aug 3, 2011
I just installed OS 11.4 in my own language; i regularly set it in the options, but it still shows english menus (only firefox is in my own language...)
View 3 Replies
View Related
Oct 24, 2010
On my last install I put Drive one windows on the first partioncreated a swap partitionlinux on the third partion rive twoLinux on the first partiton Grub found an old windows and made a menu for it So why does sfdisk -l return this? Code: Disk /dev/hda: 19457 cylinders, 255 heads, 63 sectors/trackUnits = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/hda1 * 0+ 2549 2550- 20482843+ 7 HPFS/NTFS
/dev/hda2 2550 10388 7839 62966767+ 5 Extended
[code]....
View 9 Replies
View Related
Jan 5, 2010
HOW TO INSTALL PACKAGES IN IT ,IT SHOWS SOME ERROR (Cannot install source packages) OR (No packages were given for installation.)
View 5 Replies
View Related
Apr 1, 2011
I need to install g77 in this distribution, but an apt-cache search won't find any match.
View 1 Replies
View Related
Jun 17, 2011
Quote: Originally Posted by Computerphile Personally I haven't tried anything better than Wine (if you exclude proper virtual machines), but whenever I look for alternatives to something I hit up AlternativeTo.net or Wikipedia's See Also section. Looks like there are some alternatives.
Edit: Though, if you let us know exactly what software (except for Format Factory) you have problems running in Wine, I'm sure the community can give you some proper Linux native alternatives. another major compatibility issue with wine is that i can't install canon pixma ip1300 printer drivers. no idea of installing printer in fedora.
[code]...
I have no experience with anything but standard Wine, and I haven't even used that in quite some time. Crossover and Cedega are both built off of the Wine codebase, and they both cost money. can POL do everything that wine can do? in other words, do i need to install them both or POL will do good alone?
View 14 Replies
View Related
Jan 11, 2010
I have a package on my system that has a missing dependency and I would like to install another piece of software via apt-get with out having to remove my software that is missing a dependency... Can I force it install the other package with out first running apt-get -f install?
View 6 Replies
View Related
Jan 28, 2011
Everytime I try to install opensuse it locks up at the very finish, forcing me to force shutdown. Then when I try to boot up, it loads a horribly misconfigured view of another linux install. Anyone know what is going on? I posted here alsi: Opensuse install problems - linux-free-bsd-general-discussion - Linux-Free-BSD
View 9 Replies
View Related
May 12, 2011
Added software from a PPA I use to get up to date programs, during the update empathy was deleted. I went back and deleted the new software causing the conflict but empathy still won't install. I see there are two versions, 3.1.1.1 and the ubuntu 11.04 2.3.4 I think. I want to install the natty version but whenever I try force version it gives me an error. Is the solution removing the ppa? or is there a work around like downgrading back to the original software?
View 2 Replies
View Related
Oct 16, 2010
I need to force 80 pin cable detect on my cdrom. According to the kernel-parameters.txt file you can do this by using libata.force=(port).(device) 80c Here is the actual explanation from the kernel file: libata.force=[LIBATA] Force configurations. The format is comma separated list of "[ID:]VAL" where ID is PORT[.DEVICE]. PORT and DEVICE are decimal numbers matching port, link or device. Basically, it matches the ATA ID string printed on console by libata. If the whole ID part is omitted, the last PORT and DEVICE values are used. If ID hasn't been specified yet, the configuration applies to all ports, links and devices.
My question is where do you find the proper port.device numbers? I'm guessing it's lspci but I'd rather be sure before I do something silly.. An actual working line for a cdrw as master on the first ide channel would be excellent. BTW my cdrw is detected as sr0 so the normal "ide" boot params won't work....
View 9 Replies
View Related
Feb 21, 2011
I just installed Maverick 64-bit on my new Satellite AMD 4-core laptop. I've run into an issue with the fact that Brother does not have a 64-bit driver for my Multi-Function Laser printer. They recommend force installing the 32-bit driver. I have made sure that all the 32-bit library and all the folders exist per Brothers instructions. However, I'm confused on what command I need to type in the terminal window to actually do the install. Can someone recommend the proper command to force install the 32-bit driver? Or should I download the source code and compile? I don't know the proper method for compiling a 64-bit driver either.
View 3 Replies
View Related
Apr 29, 2011
I have to go back to 10.10 for a while until the bugs are worked out. Can I force install Libre on the 10.10 version of Ubuntu?
View 3 Replies
View Related
