General :: Openwsman Connection With SFCB Is Failing?
Jun 3, 2010
First i installed openwsman-server- .2.0-5.el5.i386. Then i installed sblim-sfcb-1.3.7 and sblim provider packages by building the source code. Then i gave cim-xml request directly to SFCB using "wbemcat" and i am able to enumerate classes and its instances. But when i try to give a request to SFCB through Openwsman using the following command "wsman enumerate http://sblim.sf.net/wbem/wscim/1/cim...ComputerSystem --port 5985 -y Basic -u <username> -p <password>" i get a response "wsa:EndpointUnavailable" and in Openwsman log it is displaying the following error message "*** Connection to CIMOM http://localhost:5988 failed with 1null)"
I checked the correctness of the CIM schema specified in the request and both sfcb's and openwsman's configuration files i didn't get any help.
View 3 Replies
ADVERTISEMENT
Aug 25, 2010
I'm trying to install Dell Openmanage, which requires sblim-sfcb.Normally this wouldn't be a problem but it requires LWP::UserAgent to be installed.However there are no RPMs for LWP::UserAgent. There are RPMs for perl-libwww-perl-5.805-1.1.1.noarch.rpm, which people say should work.However yum doesn't see anything with libwww as an option so that won't work either.Running CentOS 5.5
Note: I do have LWP::UserAgent installed via cpan, however the RPM won't compile without the actual LWP::UserAgent RPM installed.
View 9 Replies
View Related
Feb 17, 2011
I am trying to write a little port knocking daemon that needs to see every failed connection attempt on every port on the system. The primary way to do this (as the Wikipedia page points out) is to monitor the firewall log file. I am using UFW and reading its output in /var/log/kern.log. Typically, when UFW blocks something, it prints a little line like this:
Quote:
Feb 17 10:42:42 serin kernel: [323588.279588] [UFW BLOCK INPUT]: IN=eth0 OUT= MAC=00:0b:e6:00:85:96:00:09:5b:9f:41:a4:08:00 SRC=192.168.0.4 DST=192.168.0.8 LEN=60 TOS=0x00 PREC=0x20 TTL=49 ID=46945 PROTO=TCP SPT=56849 DPT=1723 WINDOW=5840 RES=0x00 SYN URGP=0
But it seems that whenever UFW experiences a significant "load" (my client sends eight packets over the span of about 25 seconds, not too significant if you ask me), it just kind of "gives up" after 10 or so attempts. Log messages stop appearing in kern.log. I know the packets are coming; wireshark confirms this.
It seems to me that a buffer of some sort is filling up, because if I give the system a breather and try sending my sequence again in, say, three minutes, it prints log messages for 10-12 straight attempts before giving up again. I've tried sending packets at longer intervals and reading from other logs like /var/log/messages, but none of this has helped. Does anyone have any idea why UFW would fail to log all blocked connection attempts?
View 1 Replies
View Related
Jun 21, 2010
I have a KVM server and am trying to add a new VM. The problem is I am unable to connect to the consle to finish the installation. I have put the details of the steps I took and my ssh config file for clarity. It seems I have a problem with a vnc 'security type'.
ssh config
Code:
Port 2200
Protocol 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
UsePrivilegeSeparation yes .....
Code:
$ virt-manager -c qemu+ssh://root@phoenix:2200/system
[Prompt for password and connects OK]
KVM Server
Code:
# virt-install --connect qemu:///system -n web -r 1024 --vcpus=1 -f /dev/vms/web_os -s 5 -c ~ecosta/debian-504-amd64-netinst.iso --vnc --noautoconsole --os-type linux --os-variant debianLenny --accelerate --network network:default --hvm
Starting install...
Creating domain... 0 B 00:00
Domain installation still in progress. You can reconnect to the console to complete the installation process.
client
I can see the new VM but when I chose to open the console, the password is asked again and again without a successful connection to the console. The following is what I found in the log.
virt-manager log: .....
I then tried to make an ssh tunnel and use vncviewer to connect:
Code:
$ ssh -p 2200 root@phoenix -N -T -L 5902:localhost:5902
Code:
$ vncviewer localhost:2
Connected to RFB server, using protocol version 3.8
Server did not offer supported security type
Code:
$ ssvncviewer localhost:2
Proto: RFB 003.008
Connected to RFB server, using protocol version 3.8
Server did not offer supported security type:
sectype[0] 19
Security-Type: 0 (rfbSecTypeInvalid) Latency: 12.40 ms
ShmCleanup called
VNC Viewer exiting.
View 2 Replies
View Related
Mar 6, 2010
I'm using Kubuntu 9.10, my pppd version is 2.4.5 and pptp is 1.7.2 I'm trying to connect to the iPredator VPN service, but I keep running into problems with LCP. I've tried using knetworkmanager, nm-applet, kvpnc and plain old text-based configuration to no avail. Here's a snippet of pppd's output:
[Code].....
(I've got "defaultroute" in my /etc/ppp/peers/ipred config file.) Any ideas what could be causing this? Could it even be my router? It claims to support PPTP, but considering it claims a lot of other things which aren't true, I wouldn't be surprised if it was the culprit.
View 4 Replies
View Related
Sep 1, 2010
My ubuntu system has been running really well until this morning - software update prompt appeared on the screen, so I ran with it and let it do its thing. A while after this, my WiFi network connection started failing. I've tried rebooting and then it can take up to five minutes or more for the password (keychain) prompt to appear. Once I have typed in the password the network connection starts to work. Then cuts out. Works. Then fails again.
View 3 Replies
View Related
Mar 12, 2011
Using Wicd and it keeps dropping out or telling me "bad password" when the password is in fact correct. I even know it works because the first couple of times it worked, but the connection wasn't sustained for more than a few seconds each time. My reasoning is my wireless is functional in Ubuntu, there's no reason it shouldn't be in Debian. Wireless network card is ASUS PCE-N13. Ralink driver is installed. WPA-supplicant is installed. Gnome Network Manager is also present, though I've heard that it doesn't support my particular situation.
View 5 Replies
View Related
Aug 1, 2010
I'm running an up-to-date Fedora 12 machine with the Gnome desktop (meaning with Network Manager). My network connection is a wired ethernet to a switch which then connects to a Netgear router. For some reason, this machine can't renew its leases with DHCP, so NetworkManager deactivates eth0, taking my machine off the network. I have to click Network Manager and enable eth0, which seems to work every time.
How can I fix it? Here are the relevant bits from /var/log/messages showing a failed DHCP request and then the successful renewal.
Code:
Aug 1 04:00:08 ironton dhclient[12452]: DHCPREQUEST on eth0 to 192.168.1.1 port 67
Aug 1 04:00:08 ironton dhclient[12452]: DHCPNAK from 192.168.1.1
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): DHCPv4 state changed reboot -> expire
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): device state change: 8 -> 9 (reason 6)
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> Marking connection 'System eth0' invalid because IP configuration expired.
[Code]...
View 5 Replies
View Related
Feb 1, 2010
HDA1 is going to die, SMART says its well beyond dead, and I can tell the read/write times have gone up drastically.
I know I can use dd to copy it from a live CD.
1.) If I dd it to something.img, is there a way for me to "work" on the backup copy? Basically, I need to backup ASAP, but won't have a replacement drive for a while, so I'll need to be able to put the changes into the backup.
2.) When it comes time to restore, if I dd it to a larger drive, is there a way to take advantage of all the extra space? I assume I can dd it over and the MBR & Partition Table will go with, so I can use something like gparted to grow the partition to the drive size?
Or is there a better way to make a backup?
View 4 Replies
View Related
Feb 14, 2010
i installed fedora 11 linux in my computer.but after successfull installation,i see that a message near the taskbar that "A hard is failing". what is that suppose to mean?
View 1 Replies
View Related
Feb 13, 2011
File in question is [URL].. meder@pc:~$ tar -xvjf wkhtmltopdf-0.10.0_rc2-static-i386.tar.bz2 bzip2: (stdin) is not a bzip2 file. tar: Child returned status 2 tar: Error exit delayed from previous errors
I tried to unzip it as well, and I tried a various slew of commands to no avail on my Debian box which has no GUI. I downloaded this on my local desktop ( Ubuntu ) and was able to easily extract w/ my mouse so I'm not exactly sure what the extractor did differently...
View 1 Replies
View Related
Dec 24, 2010
Very strange Grub2 issue on my Dell Mini 10.
Had Crunchbang Statler on it, and after an update, it would hang at grub, before the grub prompt. ("loading Grub, Welcome to Grub" then blinking cursor, but no prompt or ability to get into rescue)
So I booted into a liveCD, chrooted in, and reinstalled Grub2, purging everything. No dice. Same problem.
So I figured the device maps weren't right, so I pulled off any important files via the live stick, and reinstalled #!. Same problem.
Did a bit of googling, and it seemed like it was most probably not a true Grub2 error, but a bios problem, so I reinstalled XP, flashed to a new bios (A11).
Then reinstalled, this time with Zenwalk (figured it might be a debian thing). Same thing. (note I replaced lilo with Grub2 for puroposes of testing)
View 10 Replies
View Related
Apr 11, 2011
I have a 2 Tb drive that Linux is saying is failing, the reason for this is Relocated Secotor Count, should i really worry and why is it happening to such a new drive its only 4 months old I received it on December 30th I woudl think it would not be bad at this point.
View 14 Replies
View Related
Nov 15, 2010
I am trying to dump /var/log/messages using cat command, but it is failing.
Quote:
Command:
[root@greplinux-linux ~]# cat /var/log/messages
Op:
cat: /var/log/messages: Invalid argument
messages file is present in /var/log. When I tried to open that using 'vi' it is saying 'messages' is not a file. First column of command "ls -l /var/log/messages" is '?rwsrwsrwt'.
View 2 Replies
View Related
Mar 19, 2010
I am failing to receive e-mails on client machines. My server has linux Red Hat 7.3. Can you help me with linux command to view sendmail configuration.
View 1 Replies
View Related
Jul 31, 2011
so i'm trying to create a file with the current date as the prefix in the following way (following instructions from a tutorial):
Code:
touch 'date +%F'.log
its creating the file as:
date +%F.log
instead of 2011-07-31.log
[Code].....
what am i getting wrong/missing/failing to understand?
View 5 Replies
View Related
Dec 29, 2010
An external 3½" HDD seems to be in danger of failing” it's making ticking sounds when idle. I've acquired a replacement drive, and want to know the best strategy to get the data off of the dubious drive with the best chance of saving as much as possible. There are some directories that are more important than others. However, I'm guessing that picking and choosing directories is going to reduce my chances of saving the whole thing. I would also have to mount it, dump a file listing, and then unmount it in order to be able to effectively prioritize directories. Adding in the fact that it's time-consuming to do this, I'm leaning away from this approach.
I've considered just using dd, but I'm not sure how it would handle read errors or other problems that might prevent only certain parts of the data from being rescued, or which could be overcome with some retries, but not so many that they endanger other parts of the drive from being saved. I guess ideally it would do a single pass to get as much as possible and then go back to retry anything that was missed due to errors.
Is it possible that copying more slowly — e.g. pausing every x MB/GB — would be better than just running the operation full tilt, for example to avoid any overheating issues? For the "where is your backup" crowd: this actually is my backup drive, but it also contains some non-critical and bulky stuff, like music, that aren't backups, i.e. aren't backed up. The drive has not exhibited any clear signs of failure other than this somewhat ominous sound. I did have to fsck a few errors recently — orphaned inodes, incorrect free blocks/inodes counts, inode bitmap differences, zero dtime on deleted inodes; about 20 errors in all.The filesystem of the partition is ext3.
View 2 Replies
View Related
Dec 5, 2010
I had an Ubuntu 10.10 installation that ran fine for around a month or so. I decided to go out and try to install aptosid (formerly known as sidux) as a dual boot. I couldn't get the desktop to boot in the LiveCD and kept getting an error saying that the nouveau module could not be loaded. I rebooted and at the main LiveCD screen, I added xmodule=vesa xres=1440X900. I was able to get a 1024x768 resolution. I decided that I really didn't like aptosid, so I shut it down and took out the LiveCD. When I booted back into Ubuntu, my resolution changed down to 640x480 for some reason. I decided to remove the proprietary nVidia driver I had installed via jockey. Once it was removed, I restarted. Now, I see no startup splash or a login screen - my monitor just goes to sleep.
I have all my files backed up already, so I decided to pop in my Kubuntu 10.10 LiveCD to install that. Once I choose the "Start Kubuntu" option, my monitor goes to sleep. I tried putting in Linux Mint Debian Edition LiveCD to see if that would work, and I had the same issue. After this, I went for the nuclear option and installed Windows 7 to see if it would wipe out any memory of my Linux drivers from the system. The Windows drivers for my card worked fine, so I decided to put the Kubuntu LiveCD back in and got the same problem. I am currently running a Partition Magic LiveCD, but could only boot into it using the Xvesa option instead of Xorg. My video card is an nVidia 9800 GT - and it has always worked in the past.
View 9 Replies
View Related
Feb 26, 2011
I have Dell rack server. With the network card of five network ports. But I am just using first one (eth0).
Now the problem:
Its connected the internet and the internet is working fine. I also got update using yum.
When I do ifconfig to check its dynamic IP. It also shows the IP(something like: 192.168.x.x), but if I go to services and try to start DHCPd service its fails. Its not starting at all. And If I go to other computer (Windows 7) and try to ping the dell servers IP, I cannot ping it. So since I cannot ping it from other computer, so no one we can have remote access to the dell server.
I dont understand without starting DHCPd how the dell server is getting the IP address.
So I thought maybe DHCP is corrupted so I removed it using yum and reinstalled it using yum, but no luck so far.
View 2 Replies
View Related
Aug 29, 2010
i have successfully installed zimbra on Debian machine but am failing to log in to the console admin. i have used my server name as well as my ip address but both do not work.
View 8 Replies
View Related
May 22, 2010
I run a sever 24/7/365 with Debian 5.0.4 (lenny) GNOME 2.22.3. It seems that the HDD is beginning to fail as it starting to clunk & you can hear it spinning up & down. I had lots of help in setting up the server, and i am not that good with linux...but i am learning all the time I have a spare HDD lying around, and i am wondering if its possible to use it to make a "exact working copy" of the HDD whats failing ? The spare HDD actually has XP on it, but i cannot see this preventing it from being used ?As my knowledge is still very little with Linux, and its important for me to replace the HDD, can anyone point me in the right direction to copying failing HDD ?? Also is it possible to then fit the new HDD into my server and it will work straight away ? This is to prevent any added downtime on my 24/7/365 server.
View 14 Replies
View Related
Sep 10, 2009
Squid gives the follwoing error messages when i attepmt to start it:Sep 10 12:33:24 localhost (squid): Cannot open '/var/log/squid/access.log' for writing. The parent directory must be writeable by the user 'squid', which is the cache_effective_user set in squid.conf.Sep 10 12:33:24 localhost squid[3423]: Squid Parent: child process 3446 started
View 3 Replies
View Related
Mar 19, 2010
I have a server which is installed Red Hat linux 7.3. I am able to send mails out but i Cannot receive those sent to me.
View 1 Replies
View Related
Mar 16, 2010
I am using Ubuntu 9.10 and when I tried to send mail from the command line I get: /usr/lib/sendmail: Permission denied. any takers on this.
View 6 Replies
View Related
May 19, 2011
I began the install, Debian 6.0, 64 I get through network config, and everything seems to check out, ifconfig, ping testing to the server it's connecting.I need to look into this further server side tomorrow, but assuming there are no network issues.is there any reason it would not connect to download mirrors? I just did an install on same rack, dell server not IBM, it went flawlessly. IBM is already putting up a fight. So, it's failing to download more content, I end up with no GUI and basic install.
View 1 Replies
View Related
Aug 3, 2009
I seem to have a complex issue on my hands that i can't figure out. first, i wasn't able to get access to my LVM'd hard drives via SSH without half of the content being missing or locked out (read-only or unable to open at all). the problem then went up to being unable to boot up - all i got was a long slew of [100.1234] ata1.00: error messages (they eventually DO stop once they get to around 998.234234 or whatever, and then i can log in and it seems to be "stable").
Part way through this rebooting ordeal i realized / decided to make power-on-self-test stop and wait if it finds errors (via bios) - that showed me that my 750G SATA drive is "bad" and my two (older) 120G & 250G IDE drives are "ok". i then unplugged the SATA drive, rebooted, and didn't see those error messages. however, my LVM was still obviously not coming together (since LVM was made up of the 120G, 250G, and 750G drives)
So, now it seems:
a) I can't boot smoothly with all drives in place
b) I can't do anything with lvm if i remove the 750G sata
c) With all drives hooked up, i can wait 10mins for the errors to go away, but STILL can't do anything with lvm
d) I need to recover the lvm stuff so that i can nicely migrate ALL those files (1.1TB of it) onto a new 1.5TB drive and do away with lvm
This is all running ubuntu 7.10 server edition (32-bit version on a 64-bit computer). i DID post a question on the ubuntu forum as well but so far got no replies at all.
Here's a few pics of the booting process, with one or two "fail" lines showing.
View 14 Replies
View Related
Sep 22, 2010
I have freshly installed OpenSuse 11.3 and it's ok, but online updates is very slow and keeps failing.
Here is my hw spec:
lspci:
View 1 Replies
View Related
Mar 17, 2010
I am not sure which thread this fits in, I am facing a strange problem. There is a code tarball that I cross-compile on a Fedora Core 9 machine and it builds fine. But when I do the same thing on a (heavily used) Fedora Core 7 machine, the build keeps failing in the gnuapp folders grep, coreutils etc. I have tried 'make distclean', and clearing the config.cache but no impact.
Note: I export the PATH variable (to the local cross-compiler) before starting the build. The cross compilation is for the MIPS processor and GNU makefiles are used.
View 1 Replies
View Related
Nov 12, 2009
Each time I start up debian -lenny, the network-manager does not automatically connect me to my wireless network. The connection list shows a lot of networks available, but mine is always absent from the list. This means I each time have to go to "Connect to other Wireless Network" in and write in my network name (SSID) and password (PWA2 Personal). Then is connects nicely and everything works fine until next time I boot
View 5 Replies
View Related
Jun 25, 2010
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
View 14 Replies
View Related
