i have successfully installed zimbra on Debian machine but am failing to log in to the console admin. i have used my server name as well as my ip address but both do not work.
View 8 Replies
I have a KVM server and am trying to add a new VM. The problem is I am unable to connect to the consle to finish the installation. I have put the details of the steps I took and my ssh config file for clarity. It seems I have a problem with a vnc 'security type'.
ssh config
Code:
Port 2200
Protocol 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
UsePrivilegeSeparation yes .....
Code:
$ virt-manager -c qemu+ssh://root@phoenix:2200/system
[Prompt for password and connects OK]
KVM Server
Code:
# virt-install --connect qemu:///system -n web -r 1024 --vcpus=1 -f /dev/vms/web_os -s 5 -c ~ecosta/debian-504-amd64-netinst.iso --vnc --noautoconsole --os-type linux --os-variant debianLenny --accelerate --network network:default --hvm
Starting install...
Creating domain... 0 B 00:00
Domain installation still in progress. You can reconnect to the console to complete the installation process.
client
I can see the new VM but when I chose to open the console, the password is asked again and again without a successful connection to the console. The following is what I found in the log.
virt-manager log: .....
I then tried to make an ssh tunnel and use vncviewer to connect:
Code:
$ ssh -p 2200 root@phoenix -N -T -L 5902:localhost:5902
Code:
$ vncviewer localhost:2
Connected to RFB server, using protocol version 3.8
Server did not offer supported security type
Code:
$ ssvncviewer localhost:2
Proto: RFB 003.008
Connected to RFB server, using protocol version 3.8
Server did not offer supported security type:
sectype[0] 19
Security-Type: 0 (rfbSecTypeInvalid) Latency: 12.40 ms
ShmCleanup called
VNC Viewer exiting.
I am attempting to install zimbra onto Ubuntu Hardy 8.04 x64 bit edition using this tarball:
Code:
zcs-6.0.6_GA_2330.UBUNTU8_64.20100505202919
However when I run the install script I get this error:
Code:
Press Return to continue
Checking for prerequisites...
FOUND: NPTL
FOUND: sudo-1.6.9p10-1ubuntu3.7
FOUND: libidn11-1.1-1
[code]....
Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at [URL] the Perl Home Page.
When I try to install Zimbra 7.1.2, the installation fails because it cannot find sqlite. I used strace and found that it uses "rpm -q sqlite" to find the package. But it fails-"package sqlite is not installed". Although I have sqlite installed:
Code:
#rpm -qa | grep sqlite
mono-data-sqlite-2.6.4-2.13.x86_64
[code]....
I am completely new to Ubuntu so please make your answers really simple ! I want to set up a mail server for a home network and have been suggested I use the Ubuntu solutions. I am fairly proficient with Windows programs and even construct databases but I am a complete novice when it comes to command line instructions. Yes, I know I have been spoon fed!
I have been told that it is possible to install Server programs from the Desktop version and that they provide a GUI in most cases. Is that so? I have the desktop version running and up to date but I am unsure what to do next. Starting the Server ISO CD from Desktop seemed logical but when I did I was not sure if it was correct and backed out. I have also read a thread on this forum that suggests the use of Zimbra as a Mail Server, it sounded like my kind of solution so I think I would like to try that.
One last factor. I have an existing P2P network (2 Vista, 1 Mac Book and this Ub' desktop/server) running already which uses the Router for DNS. I suspect I am going to have to do things in a certain order if I am not going to go backwards and ruin the families email and surfing!
Have any one been able to setup zimbra with procmail? Procmail as the filter for zimbra I mean.
View 1 Replies View RelatedIs there some step by step? for ubuntu 10.04 server?
or there is something better ?
if there is something like colaborative email server like gmail will be great.
I'm trying to install Zimbra and Apache. I'm having difficulty setting up DNS (if necessesary) and also configuring my /etc/hosts show me what the /etc/hosts should look like.
View 3 Replies View RelatedGot a Zimbra server FOSS edition running on CentOS5.5. Everything was running fine until couple of days just found out that web administration interface just does not give the proper status. Web console says that none of the services are running which infact is not true. Only service that is not running is logger. This is the zmcontrol status output
Code:
antispam Running
antivirus Running
imapproxy Running
ldap Running
[code]....
Just the logger service is not running all the others are. But web admin interface shows all are stopped. Also it can be seen that zmlogswatchctl is not running. Starting it manually does not do any good. It does not start and it dies out by itself.I tried to google and found a couple of bugs related to logger and web interface but those were old and should have been done in this version 6.
I want to setup either Zimbra, qmail or sendmail. i have no idea of these three mtas (i am new to these mail servers)but give me the suggestion that which one is better in case of security, fast routing the messages, scalibility and portability and cost.
View 5 Replies View RelatedI installed CentOS 5.5 this morning with zimbra 6.0.7. Everything seemed to go perfectly until at the end the following zimlets failed to install
com_zimbra_phone...failed.
com_zimbra_email...failed.
com_zimbra_dnd...failed.
com_zimbra_url...failed.
I installed zimbra successfully on Fedora 11 before. But I heard how stable CentOS is so I decided to switch. I read a lot online about how a lot of people have had zimbra on CentOS5 without any issues that were not easily solved. Zimbra appears to be working fine. I was able to add my domains, accounts, and send/receive email. So I'm not quite sure how important these zimlets are or if I even need them. But I'd like to know that the software is working the way it's supposed to. Since I'm new to Zimbra I want to make sure I get full exposure so I can learn it well.
I am having trouble configuring Zimbra to restrict sending for some users. A subdomain has been added in the ZCS web page for the domain, resulting in two potential mail addresses:
[URL]
The subdomain needs to be restricted from sending mail to the outside world and to other users on the same subdomain. It should only be able to message users on the main domain. The users on the main domain should be able to email anyone in the world. Is it possible to configure this without installing Zimbra on two machines?
Today, I am in a dilemma in choosing my career path. Hope you will help me in solving this. I have completed 8-9 months as Linux Admin. I have an opportunity to continue as Linux Admin or become Linux application developer ( C++ ). I have little bit of competency in C++, but currently I am Linux Admin. Here are my questions
1. Are Linux admins highly paid than Linux application developers ?
2. which one has got more demand ?
3. what will be the future of Linux Admin ? what would be the role of Linux Admin in an organization after 5 years ?
4. As I am interested on both of these options, I am facing difficulty in choosing my career path.
After my windows computer died of old age, I was given this computer. It has Linux Mint 9 Isadora on it. I am trying to learn how to use it. The update and other functions are locked out with a password. Is it possible to change it without reinstalling the entire Os.
View 6 Replies View RelatedAlso, how can I change between the two?
View 4 Replies View RelatedI am using linux mint and have installed Netbeans on it but whenever I run netbeans from accounts other than root it throws an error for not having permission to start glassfish server of netbeans. I also tried running this application using run as administrator option but then the application does not start.
So is there a way to assign netbeans admin rights permanently so that whenever I start this application from other accounts I should not face this error?
i have centos5.3 i want to create user with non admin privileges he is unable to see contents of server only he will able to login nothing else
View 12 Replies View Relatedi want to start a career in linux, completed btech in 2010, tell me the process of entering into linux world.
View 2 Replies View RelatedI am not new to linux, but am to mysql. i run a website, on which i decided to put vpet, a virtual pet php thing. now in the instalation of this thing, it did not ask for an admin password. but it did come with a database. so i'm guessing the login is hidden in there. heres the question, i have phpmyadmin. how the heck do i read the database?
View 3 Replies View RelatedI'm currently system admin for mostly Solaris and Windows..however finding I need more linux than ever before.
View 6 Replies View RelatedHow can I start a program from tty1 console text mode to be executed in tty2 console text mode? Actualy I would like to start a program (chat client cli program) in tty8 automaticaly when linux PC boots.
View 6 Replies View RelatedI am first time working on 389 Directory server. I have installed 389 Directory Server on RHEL5.5 Server using following steps
1. yum install java-1.6.0-openjdk
2. yum update
3. rpm -ihv epel-release-5-3.noarch.rpm
4. cd /etc/yum.repos.d/
5. [URL]
6. yum install 389-ds
389-ds installation completed successfully without any error but when I want to setup it, I didn't find any fedora directory in /opt or any where also tried to find setup-ds-admin-pl script but it is also not available anywhere on server.
I can mount and access windows drive in root, but cannot mount NTFS partition in non admin mode. It tells authentication required!! , could not find out why it is happening.
View 5 Replies View RelatedI have created a new user using sudo adduser "user1" from the root .but this user does not have full admin rights...How to give full access to this user1?
View 3 Replies View RelatedI've been forced to setup a dns server on centos as the sys admin is away. I've installed Bind with chroot and its working fine, however I cant seem to get my domain to work. Below is the configuration
[Code]...
i just jumped into linux with both feet not having a clue what im doing.. loaded ubuntu 10.10.. liked it but i couldnt get stellarium to work with my ati x1300, so i upgraded to 11.4 and it works fine.. problem is.. i have a applications start on the left side, but i cant seem to find the setup like in 10.10 at the top, where you can go to terminal, admin, synaptic, etc.. the only way i found synaptic was trying to download it and asked me if i wanted to keep it in the bar, so now its on the left, but cant find anything else.. ive been trying to find it on the net but 11.4 seems to be so new that there arent very many faqs or tutorials about it..it would be nice if i can get that stuff back without having to format and reinstall 10.10.. im not going back to windows.. so i might as well figure this out..
View 2 Replies View RelatedHDA1 is going to die, SMART says its well beyond dead, and I can tell the read/write times have gone up drastically.
I know I can use dd to copy it from a live CD.
1.) If I dd it to something.img, is there a way for me to "work" on the backup copy? Basically, I need to backup ASAP, but won't have a replacement drive for a while, so I'll need to be able to put the changes into the backup.
2.) When it comes time to restore, if I dd it to a larger drive, is there a way to take advantage of all the extra space? I assume I can dd it over and the MBR & Partition Table will go with, so I can use something like gparted to grow the partition to the drive size?
Or is there a better way to make a backup?
i installed fedora 11 linux in my computer.but after successfull installation,i see that a message near the taskbar that "A hard is failing". what is that suppose to mean?
View 1 Replies View Relatedi've got a regular user i want to turn into admin group so he can have same privileges as a root. should i just change the GID in /etc/passwd and /etc/group or should i use usermod/groupmod?
View 3 Replies View RelatedDescription: I am a newly appointed system engineer taking care of linux servers. We have a new set of data coming in which need below configuration: How to do a script with function?:
for files with ".txt" in sm
copy each of the files to folder : sm1 and sm2 (log every copy)
if succesful:
remove original
log into the log file
if not successful: (not successful copying 1 particular file to all the folders)
retain and retry
log into the log file
mail out the admin with that particular file name
I have already do try a bit:
cd /export/home/
for dir in sm1 sm2; do
cp -p sm/*.txt $dir/
done
Is my starting right? How to do the rest parts?
