I have this ancient Dell Dimension V333 with a Pentium II 333 MHz and 320MB RAM that my family needs for web browsing, word processing, etc. What I need is a distro that is easy to setup and install and easy to use because they have only ever used windows (and a little ubuntu).
View 10 Repliesim looking for a slackware based distro that is basically recompiled and easy to install.
View 6 Replies View RelatedI want to know which linux distro version is good and easy for installing bioinformatics software installation...
View 2 Replies View RelatedHow to setup/install a vividwireless USB broadband 4g modem on Ubuntu 11.04 distro?
# lsusb... yes, the modem type is an Huawei bm358 Wimax USB stick from vividwireless vendor,it shows mac address as follows: 641f03d903e...
cottoned on to the blah about bogus 4g... why the lies I wonder, apparently there is no 4g in Australia!
I have a linux box set up as a multi-purpose server for my home with three Windows client PC's. The linux box is based on a slightly modified Slackware 9.0 distribution using Linux 2.4.20 and an unfortinately old, slow AMD processor with a miserable 512Kb RAM. The linux box serves the CIFS file system to the Windows boxes, runs the SQUID HTTP proxy, the Apache web server, a print server, does masquerading, mail serving and a very effective firewall using iptables.
This system, although slow, has run perfectly for several years.Let me say that again - This system works perfectly.I had decided that now is the time to upgrade the hardware, so I bought a Gigabyte LGA775 motherboard which has two 1Gb network interfaces on it, an ASUS 256Mb PCI-E display card, 2Gb of DDR3 RAM, an Intel Core2-Quad processor and a bunch of 500Gb SATA drives to set up a RAID5 array (but I intend that the system boot off one of several 40Gb PATA drives I have).I set up the processor, motherboard, display card, RAM, a SATA DVD Drive and a 40Gb PATA hard disk in a "breadboard" layout and installed distro 13.1, being careful to set up the static IP for the local network, dhcpcd to get an IP address from the cable modem (my internet connection) and to enable ip_forward in the network configuration.
Then I installed a script invoked by /etc/rc.d/rc.local which installed all the SAME iptables rules as my old Linux box. There was one minor glitch when I had to change 8 occurrences of "-d ! $LOCAL_NET to" "! --destination $LOCAL_NET" but that was no problem. I also set up /etc/resolv.conf, /etc/hosts , the BIND server files etc. etc. exactly as in the old box.
I am able to ping mirror.aarnet.edu.au (this is at the heart of Australia's internet hub network - if it's down the whole bloody thing is down) and have the system find the correct IP from the designated nameservers and contact that server with a return trip time of 35ms. I am able to run a telnet session from one of the Windows boxes and edit files on the Linux server. So both network interfaces work and I've got them the right way around.I am able to run FTP on one of the Windows boxes and connect through to mirror.aarnet.edu.au, although it seems to hang when I try a DIR (but then so does the old linux system).
I'm trying to set up a machine to "drive" a piece of equipment (a metal plate embosser [kind of like a daisywheel printer for credit card sized pieces of metal], FWIW). What I ideally want is a linux distro that I can boot from CD (I think the term is Live CD?), log itself in as a user and display only a console. It needs to be able to support windows fileshares and python.
Essentially it needs to boot, connect to a single fileshare on a Win2k8 machine, and be able to execute a couple of scripts that will output to a serial port. One of them will be more or less the following:
wget http://WEBSITE/?<parameter passed to script> --quiet --output-document=<name of serial port>
The other is a somewhat more complicated Python script that processes a CSV spreadsheet and produces data for the machine.
Situation- Laptop (2003 made Toshiba 2410) with dead secondary controller, so no CDDVD drive, BIOS does not support any form of booting from USB. Laptop has working floppy (had to repair it) distros that are good for older units like that that also support booting from diskettes, and then can mount and install from a USB CDDVD rom drive.
View 7 Replies View RelatedJust loaded Open SUSE EDU L I F E 11.2.2 on a Server and like what I see. The install went well and everything came up fine. I like the look and feel of this distro. The GUI features are impressive. Internet connects via eth1 . Sound, CD/DVD works and plays ok/ , grapics all working. I have two NIC cards installed.I am preparing (learning , testing, exploring) with a number of Servers that I want to take to schools in Africa.One of the key components that I need to get up and working is the LTSP. I was delighted to see that this version includes EASY-LTSP with a KIWI component. [SUSE KIWI-LTSP] So I printed out the LTSP/Quick start/Easy-LTSP (Guide) and tried to set up LTSP on my server.I went to KIWI/Prebuild in the Easy-LTSP presentation page.A box popped up with this info:
Prebuild Images:
IP 10.0.0.254
Interface eth0
[code]....
When I click on the Easy-install icon, I see the cursor change to a watch, and then it stops, and Easy-install does not start. I have run:
Code:
apt-get update
apt-get upgrade
-and-
apt-get install libgtk2-ruby libgtk2-ruby1.8
The latter being recommended when I searched google (Apparently apt-get sometimes removes ruby which easyinstall uses) It turns out I did need ruby, But my easy-install remains closed...
Can someone recommend a free clock that sits in the taskbar and is easy to install. I am using Mint 11 but for some reason the clock does not show.
View 9 Replies View RelatedAnyone know of a good hardware load balancer that is easy to setup? 100mbps.
View 1 Replies View RelatedGot an old computer running XP like a snail Would like to use as a childs first computer Specs Pentium 3 799Mhz 128 RAM 20GB HDD Looking for an appropriate version of Linux Distro if any to set up and run.
View 14 Replies View Relatednominate a disastrous distro from past or present that was simply AWFUL and what exactly was so bad about it?
View 14 Replies View RelatedI bought laptop HP ProBook 4520s (Core i3, ATI Mobility Radeon 4350, 4GB 1333MHz Ram).I'm looking for the best Linux distro to install on it. With which distro do you think it will cooperate best?I had a problem with Ubuntu 10.04 (stripes when playing video).
View 1 Replies View Relatedwhich distro should to install without having to burn a cd. i have grub installed though so i guess extraction the iso and pointing it to files to boot would be a good option.
View 2 Replies View RelatedFor those who need or want to install the latest ATI proprietary driver (Catalyst 11.2) right after a fresh 11.4 install - and might not look for solutions in the development subforum.In order to compile the module, I installed the kernel sources and the pattern devel_basis. I normally use most packages in this pattern, so I install it by default from other scripts. While running atiupgrade on a fresh install, I was surprised by the number of packages getting installed with that pattern.Please report if it doesn't work. (like aticonfig initial failed to add a fglrx section for some reason).Take a look at the atiupgrade thread in the development forum: Upgrading ATI driver with atiupgrade.
View 9 Replies View RelatedI just finish my LFS distro and now the only way I have to install it on another computer is copying files from a box two another. I want to make this proccess easy, user friendly if possible, like making an install DVD that I could just put in the drive and choose install, no livecd is needed.
View 3 Replies View RelatedI just bought a few nova5000 computers for a decent price and i want to put a linux distro on it. all the info on the computer is at [url]
View 8 Replies View RelatedI currently own a Viliv x70ex UMPC. It has Windows 7 Home Prem. currently loaded on it, but I would very much like to set up a dual-boot partition for a a Linux install. My current issues stem from the fact that thus far to date, my research has essentially come up with more issues than solutions as far as this goes. Among other things, I've seen lots of references to driver issues for the touch screen, graphic issues with the Intel GMA that's installed, and so on. If anyone out there can shed some light on this problem, or be able to direct me to a resource with a tutorial for doing this,
View 2 Replies View RelatedI have been hearing some cool things about window managers like fluxbox and I was wondering what the best distro is to put it on? Is fluxbox the best window manager to use?
View 9 Replies View RelatedI am trying to setup a temporary media center because the one I was using died. The computer I have to work with is a crappy old computer and its only purpose is going to be a middle man between a server I have for movie storage, and my TV. I don't want to spend any money right now because I'm working on building a MythTV system at home, so until then I'm trying to setup this temporary solution. The computer I have to work with is a Dell Optiplex GX150, everything stock.
I'm looking for a distro that is light enough to run on this machine without any problems (about a 1 gighz processor and a 1/2 a gig of ram), can display movies just fine, and must be able to support 1080 resolution. I've tried Mint 10, but that's way too top heavy, as is Ubuntu 10.10 and 10.04. I also tried gOS which displayed the resolution just fine, but was WAY too resource intense for this machine... Just clicking on the menu took 5-10 seconds same as with Mint.
I have a 8 GB flash drive and a 4.3 GB DVD iso (openSUSE-11.3) Is it possible to use the flash drive to install the linux? Pendrive linux universal USB installer formats it to Fat32 which limits the filesystem to 4 GB.
View 1 Replies View RelatedIf I can install more than one distro on my Multiple boot pc. I already have, Mandriva, Win xp, and Win 7 on. But you know how it is, you want to try out all the linux systems if that is possible. I guess using a live cd would allow me to do it. I do not want to bugger up the systems I already have on.
View 9 Replies View Relatedi multibooted with windows 7 and ubuntu 10 lucid, windows crashed for some reason and ubuntu remained running live and strong, but i want to do a clean install of windows while still having my installation of ubuntu untouched. i tried doing this on several machines but windows ended up becoming the dominant bootloader and i couldn't get grub to recognize the windows os partition and the linux partition for booting but when i did i only got the linux distro and i didn't see windows when i tried to boot into the distro it just re-directed to the grub menu it just kept doing this until i decided to turn the machine off
is there a way to install windows and dual boot it with linux if linux was installed first
I've been dabbling into linux by installing Wubi on my main computer, out of ease to install, but I use windows to do many things I'm not sure if I could do as easily in linux. Anyway, I had a macbook before I got my new main computer, and have been wondering if I can install linux on my macbook to test out other distros without potentially endangering my main computer (out of complete idiocy on my part, of course). Is this possible? Is there any specific "guide" out to do this?
View 14 Replies View RelatedI have a laptop dual booting to Windows 7 and Opensuse 11.2. However, I'd like to switch to a different Linux distro (probably Ubuntu, that's what I'm used to)
Is there a way for me to do it without losing the Windows 7 setup/data?
I have a box with Novell Suse linux installed. It asks for username and password I do not have and cannot figure out. I also have a SantaFe distro CD with which I would like to replace the Suse on the box. I cannot get the box to BIOS to change the boot order to boot from CD. I would like to break free of Windows, but can't seem to get there from here...
View 5 Replies View RelatedBesides Puppy or DSL, is there a full "regular" Linux distro that is friendly to be installed on a USB flash drive that won't wear it out? I want to be able to upgrade it, not just keep minor persistent changes like the methods outlined in pendrivelinux.com. The loopback file would fill out too much if I actually did a apt-get update, so I want something that installs natively on a USB flash drive with EXT3/EXT4, etc.
However, is there a distro that sends the log to a tmp ram drive, for instance? Something made *not* to wear out a USB drive too fast? I want a truly portable Linux on a UFD, not a semi-attempt that uses casper.
Laptop has broken internal CDROM. I booted with floppy to get Puppy 431 installed from USB stick. Now I have USB CDROM access thru Puppy. I can mount and see the CD fine.
Is it possible to boot or install from a currently installed linux distro (Puppy)?
I have a second free partition ext2 available, sda2, and GRUB is working fine for me on boot.
(machine also doesn't have boot from USB option, yes, it's old, a project I am working on, I have Nimblex in CD now, I think it's a live cd, I would like to try a few different ones by installing to sda2 and wiping if ng.)
I just threw away 2.6.27 from my ubuntu10.10 installation because I thought I installed 2.6.28 apparently, I was mistaken and I threw away my one and only installed kernel.Is there an easy way to install the kernel? I'm not a super genious with that low level stuff, so if it's too hard I'll probably be easier off just reinstalling 10.10.
View 2 Replies View Related