I recently installed Arch Linux on an Intel 40GB SSD. I used GPT for partioning (via GNU parted) and created the following partions:
/dev/sda1 : 1 MB, no FS, flag=bios_grub
/dev/sda2 : 30MB, /boot, ext2, flag=boot
/dev/sda3 : 20GB, /home, ext4
[code]....
I have 2x 1TB drives:
Code:
But when I check
Code:
I only have 914G space...
I have an asus pc, and its network hardware is not recognized by debian, the drivers are not even in the list provided during the installation process. I managed to download them from another pc, but if i try to make them and install them, i'm stucked because Make is not installed on debian (nor is sudo).So i need a connection to install the drivers that provide me a co0nnections..
View 4 Replies View RelatedI just installed ubuntu 11.04 last night. I noticed most of my effects were missing so I tried to put them back on. This didn't work so I disabled the effects. Then, my panel at the top and the Launcher is missing. .How do I get these back?
View 6 Replies View RelatedHow to properly integrate these RPMs into our system?
Option 1: we could take those missing OS RPMs and install them?
Option 2: can we package the missing files from missing OS RPMs into the existing Linux-xxx.rpm?
I am following [URL] to install ubuntu on my beagleboard via Ubuntu 10.10 on liveCD. When I enter this command in terminal.
"sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle"
It gives me a error sayings Dependencies are missing.
"Missing pv.Your System is Missing some dependencies
Ubuntu/Debian: sudo apt-get install uboot-mkimage wget pv dosfstools btrfs-tools parted"
And when I enter the that above in terminal I get the following error.
Unable to locate PV.
I'm running Ubuntu 10.10 on an HP Pavillion dv6700 laptop. I have never been able to play either a cd or dvd on this system. (Not on the previous Ubuntu 10.04 either.) I just installed the GNOME device manager from the Ubuntu Software Center, and I can't fine anything in the list of devices that looks like a cd/dvd player.
View 3 Replies View RelatedFor some reason my RPM programs aren't showing up in my /var/cache/apt folder. Am I looking in the right directory or do I need to do something else get them back? I'm using PClinuxOS Gnome Edition 2010.12
View 3 Replies View RelatedI've mysql server running ,and i have one single database. everything is working fine but I cant find .MYD and .MYI of one of my tables .and now when i tried to make a backup mysqldump fails because .MYI et .MYI are not found. I tried locate my_table.MYD my_table.MYI BUT no chance
View 4 Replies View RelatedFedora 12 2.6.32.9-67.fc12.i686I have tried doing the recommended as its saids at the bottom. However, that didn't work. So I have to yum upgrade --skip-brokenDoes anyone know how to solve this problem?
nss-3.12.6-1.2.fc12.i686 from updates has depsolving problems
--> Missing Dependency: nspr >= 4.8.4 is needed by package nss-3.12.6-1.2.fc12.i686 (updates)
nss-3.12.6-1.2.fc12.i686 from updates has depsolving problems
[code]....
I have encountered some cases that the ./configure log says:
config.status: creating xxx/Makefile
but when make fails on:
...
make[2]: Entering directory xxx
make[2]: *** No rule to make target `all', Stop
...
and xxx/Makefile is absent in the disk. Why does it happened?
I have a question on using diff. I have two files that contain directory/file listings: d11.lis and d11.lis from a previous day. I am not interested in files that changed, or were added, I just want to see a list of files that are missing on day two.
View 5 Replies View RelatedI have an external 2.5" eSATA drive which up till now was using via USB2.0 connection and was working perfectly. The drive is pretty new - I think less then a year and it's a Seagate too of which I think to be more reliable although still consumer based.I had connected the drive to FreeBSD 8.0 32bit on my server in ReadOnly mode using ext2fs in order to stream the information across my network.
Plugging the drive into Linux recently yielded everything performing fine, as the drive stores all the seasons of a TV show I started recognizing that things where outa whack when the linearity of the episodes stopped being sequential and previous episodes started playing when clicking an incremented episode.
The drive is formatted with the ext3 filesystem and I have already attempted to run e2fsck -p on it which showed up as the drive being 'clean'.I then attempted to use my notebooks eSATA Express card to connect the drive via the eSATA cable as I have found it to be more reliable then the USB2 / ext3 solution which I've had my fair share of problems with. However, the drives TOC or Journal maybe damaged by whatever reason so I will need to repair that.I stumbled across Magic Rescue and so far have compiled it but not used it as I wanted to be sure first if there was another way to do this.
I installed FEDORA 8 on my laptop for a class project. everything went find except. with I attempt to connect to any network. I keep getting the no network device error. so I tried to install the Ethernet and wi-fi driver directly without success.
View 1 Replies View RelatedAfter the successful installation of linux my system was rebooted and opened as root user and got my window with blank screen showing only my computer and trash icons and the rest of the tool bars are invisiblewith an the error like unable to find the Gconf seetings.
View 2 Replies View RelatedI installed linux obuntu latest version for my laptop, but unable to see the icons on the top and left margin on the desktop,they are blank,but opens
View 2 Replies View RelatedI'm running Linux on an Intel Core 2 Duo processor. When I apply power to my computer, it boots into one core but appears to leave the other one idle. On the screen, it prints:
....
SMP: Allowing 2 CPUs, 1 hotplug CPUs
.....
I can confirm that only 1 CPU is active by logging in and examining /proc/interrupts and /proc/cpuinfo. After issuing a "reboot" command, the screen shows:
...
SMP: Allowing 2 CPUs, 0 hotplug CPUs
...
So, when I do a cold boot, I one get 1 CPU. When I do a warm boot, I get both CPUs. This is a problem for me because I'm running Linux on an embedded board and I need both CPUs to be running.
I've played around with BIOS settings, the boot string, kernel configuration, and CPU hot plugging. I can't seem to find a way to get both processors running without booting the system twice.
I thought that the CPU hot plugging path showed some promise but I can't seem to get that feature working on my system. The first issue is that the Linux documentation doesn't seem to match with what I'm seeing. It states that you should be able to go into /sys/devices/system/cpu/cpuX/ and write a zero or a one to the file labeled 'online' to disable it or enable it. When I go to /sys/devices/system/cpu I only see a directory for cpu0. There isn't a directory for cpu1.
After a reboot, I do see two directories int /sys/devices/system/cpu (cpu0 and cpu1). At this point, it won't let me 'offline' the second processor. The echo command gives me an error. (By the Way: the 'online' file in each cpuX directory has read only permissions.) This error occurs after I've changed the permissions on the file to read/write.
I confirmed that the following parameters are set in my .config file: CONFIG_HOTPLUG, CONFIG_HOTPLUG_CPU, CONFIG_SMP, CONFIG_SUSPEND_SMP
I've done searches on google until my eyes popped out and can't find much information. I see others have had similar problems but they all seem to link back to ACPI in BIOS. I've already played with all of those settings and I didn't see any effect. One reason I don't think it's a BIOS problem is because a warm boot (reboot) seems to 'fix' it.
I've tried different kernels, different distributions, and different computers. I see similar behavior in all configurations. I feel like I'm missing something fundamental.
I am in the process of install Graphviz for NagVis but when I run yum install 'graphviz*' I get the following:
Code:
Error:
The program package-cleanup is found in the yum-utils package.
I am running CentOS 5.5 32bit and have only added the extra rpmforge repo's.
While i trying to install apt by yum install apt
I got the result:
I thought running an update from my OpenSuse 11.3 dvd would solve my problem, but It doesn't; I'm not given the option to choose a gui environment. It leaves me at a prompt here. /home//
View 3 Replies View RelatedI work on opensuse 11.2 32 bit on my core 2 quad. Although I have 8GiB ram, in the system monitor I see 3.5GiB!!!! I really need 8GiB ram, please let me know why a part of the ram is missing?
View 3 Replies View RelatedAfter all many times I've read the on line tutorial and How To Install PHPMyAdmin the result is always the same.I recently installed CentOS 5.5 and finished installing via yum the httpd, Mysql and PHP and have it run smoothlyBut when I've tried to download the phpMyAdmin-2.11.11-english.tar.gz.gz and untar it in /var/www/html no phpmyadmin directory in there. I am really confused becase based on the online how to's after I untar it I should move the decompressed file to phpmyadmin directory
View 4 Replies View RelatedAnyone has rhel 3 update 5 cd 1 as i lost first cd.
View 2 Replies View RelatedSomehow I deleted my panel at the bottom of my desktop screen...I don't know what I did or how to undo it...Do you have any suggestions as to how I can get my panel back to the way it was when I first installed Ubuntu?
View 6 Replies View RelatedI just installed fedora on a new partition and I get this error when I try to boot Xp.Here is what fdisk -l prints :
Disk /dev/sda: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I have tar files where I archive about 250 files, each about 80 Mb, without compression. In a few cases tar is only returning some of the files. For example, when doing an extract of the file using:
tar -xvf 356.tar
I got only 103 files, when it should return 255 files, but tar does not give me an error. Furthermore, the tar archive is 15.8 Gb while the extracted folder is just 6.4 Gb. The tar files were created using:
tar -cvf 356.tar 356
where 356 is the name of the folder. All the steps where done in the same machines, under Ubuntu 6 and newer. Any ideas if there is a way to recover the files that are not being extracted?
i couldn't find anything on google. So here is my problem: It's Debian GNU/Linux. I installed apache2 a few weeks ago, but due to some work I couldn't go on installing further things. Today I installed php5 and mysql. Everything seemed to work fine. I loaded an existing MyBB Board and WordPress Site onto the server and imported the mysql db. I can open the sites and login. However, there are problems. I think my problems are due to the compiled modules. Some are missing. I checked several sites. They all give me this listing:
Code:
apache2 -l
Compiled in modules:
core.c
mod_access.c
[Code]...
What should I do? How can I get the missing modules? Do I have to install apache again (how? remove - install? install what?)? Step-by-step instructions would be kind, because I don't know a lot about unix systems.
the bottom panel in my fedora is missing.please do tell me the way to restore it back
View 8 Replies View RelatedSomething unfortunate just happened. I was editing the bash file from my terminal and changed a source. After this I was no longer able to input commands for interpreting in the terminal.
View 13 Replies View RelatedMy latest problem: (Ubuntu 10.04)My "pictures" folder is missing from the "Places" menu. It used to be there....I didn't do anything...but now it's gone. I liked having it there- I can access that folder through "home folder" but it was nice having it where I could get to it with just one click. How can I get it back? (There is no option to edit the places menu in the "edit menus" thingie)
View 5 Replies View Related