Kernel 2.6.21.5, Slackware 12.0 Assuming I work in a text console (tty1,...,tty6) and that I have audio at Line In (the jack at the machine rear panel), how could I do to have it at Line Out?
View 6 RepliesI want to take a graphics file and make 10 copies of it to the same directory, each with 001, 002, or some such designation at the end of each file name so they have discrete files names. Is this possible using cp?
View 12 Replies View RelatedI have two files, file1.traj and file2.traj. Both these files contain identical data and the data are arranged in same format in them. The first line of both files is a comment.
At line 7843 of both files there is a cartesian coordinate X, Y and Z ( three digits ). And at line 15685 there is another three digits. The number of lines in between two cartesian coordinates are 7841. And there are few hundreds of thousands of lines in a file.
What I need to do is copy the X Y Z coordinate (three digits) from file1.traj at line 7843 and paste into file2.traj at the same line number as in file1.traj. The next line will be 15685 from file1.traj and replace at line 15685 at file2.traj. And I dont want other lines (data) in file2.traj get altered. This sequence shall be going on until the end of the file. Means copy and substitude the selected lines from file1.traj into file2.traj.
I tried to use paste command but I cant do for specified line alone.
Here i showed the data format in the file. I used the line number for clarity purpose.
Code:
I want to access a file, and check the length of every line.After, i want to check and replace all lines with length over 10 characters, with a message.Does anyone have a clue on that?
View 1 Replies View RelatedI am trying to write a program in C which compares two files and prints the line that is equal.
Here file1.txt has
and file2.txt has
Note: file2.txt consist of only a single string where as file2.txt has multiple lines. Actually im comparing two files with md5sum values.
Here is the code but it compares only first line of files..but it should compare the whole file1..and sorry iam a beginner in C can any1 sujest some modification to this code so that..it can compare file2 with entire file1
Quote:
I want to insert a line at a particular line number using sed or awk. where line number is not fixed and is in form of variable.
I want to use variable in sed or awk command.I tried something like below, but no luck.
How to create cron tab when DSL line down set automatically restart the network service while DSL line up?
View 3 Replies View RelatedAfter running the following command, I get:
[root@yukiko /]# find / -iname .bashrc
/home/clamav/.bashrc
/home/vpopmail/.bashrc
/etc/skel/.bashrc
/root/.bashrc
But I would like to have a command that prints a specific line by supplying the command with the line number, for example:
[root@yukiko /]# find / -iname .bashrc | getline(2)
/home/vpopmail/.bashrc
Is there such a command on CentOS?
I have several files with many lines something like this:
I'm trying to write a script that will count the number of characters per line that doesn't contain a ">" symbol and give me an average of those values. I have most of the script together but I can't figure out how to connect some of the steps.
Code:
I am trying to write a script that takes an input file ($FileName) and an intermediate file ($FileName.info) and removes lines from $FileName if the value in $2 of $FileName.info is <75.
I can't figure out how to feed only one line of the .info file to the if statement at a time so that it will perceive it as an integer instead of a list.
The error I am getting now is ./script.sh: line 6: [: : integer expression expected
Sample input $FileName
Code:
Code:
Code:
Script so far:
Code:
I've written a script to parse a file and print each line that ends with matching pattern, if the next line is blank. The pattern lines are the result of md5sum $i|sed 's/path///g' so that only md5 and filename appear. Here's what I'm using.
Quote:
for fline in `sed -n '/.*.ext$/p' file1`
do
if [ "`sed -n -e '/'"$fline"'/ {n; p;}' file1`" == "" ]
then
echo ""$fline" has no info" >>file2
fi
done
[Code]....
I'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies View RelatedI want to sort a number of lines based on their size:
data:
-------
12345678
87654321
1234
[code]....
Should output as:
-----------------
1
2
12
21
[code]....
But i'm gettings this with sort
----------------
1
12
123
1234
[code]....
Can we sort the above "data" text, based on "number of characters" instead of "character order"?
I am combining data from a couple different input files and creating an output file in a specific format. I notice that if I use the >> operator, information gets appended to a new line in my output file. This is useful, but if I'd like to append onto the CURRENT line, is there an easy way to do this? I've been googling around and see lots of complicated answers, nothing that suggests to me an easy way to do this. For example, if my output file looks like this:
b1a:] cat test
hello my name is
b1a:]
and I'd simply like to append "Bob", how can I do it? If I use
b1a:] echo Bob >> test
b1a:] cat test
b1a:] hello my name is
Bob
b1a:]
So what I would prefer is some command that would create the result:
hello my name is Bob
This solution works but is slow with large files. I am looking for a faster solution.
The 2 files contain filenames, one of them has associated data I want to append to the other file's matching filenames
file1:
file2:
I append file2 by matching the unique_filenames and appending them with the tag data and some formatting
appended file2:
Here is the SLOW code
while read inputline.
I need to grep for a particular string and if found need to display the line containing that string, the line above that and also the first line of that paragraph.
Can this be done via sed.
Eg, My Paragraphs
OA connectA
Enclosure:
Interconnect Module #6 Status:
Here, if I grep for Critical, it should display the following
Similarly if I grep for Degraded, it should display
I have to do several scripts and I have no idea of how to do this one: Make a script that read line by line the passwd file and prints in console.Hope you understand couse my english isso bad as you can see.Our teacher told us something like this:#!/bin/bashwhile read line doecho $lineadone < dispositiveexit
View 9 Replies View RelatedI have a dataset (see example below) that I would like to go through and copy all lines containing a certain string ("LGIG") plus the line immediately following that line to a new file. I have no problem grepping lines containing the string LGIG but I'm lost how to translate that to line number and shift up one line number for each instance of that string.
Example input file:
[code].....
I have the file abc.txt
cat abc.txt This is a test file Nothing is new in this world
I want to replace "This is a test file" to "Text is replaced"
Code:
FindString='This is a test file'
ReplaceString='Text is replaced'
Findarray=(`echo $FindString | tr ' ' ' '`)
[Code]....
But this is not effective. how to replace entire line either using sed or awk or any other utility.
I m writing a script to delete a line at particular location.
But i m unable to use variable for specifying line number.
For example.
Code:
works fine and deletes 7th line from my file
But
Code:
gives following error.
Code:
I am using xterm and sometimes when typing long commands into a small window, the command extends beyond the end of the line. On my old uni setup, when this happens, the cursor moves to the line below and you can see what text you have typed above however on my slack 13 setup, it overwrites the current line so you cannot see what you have typed! How can I set xterm to move onto the next line instead of overtyping?
View 14 Replies View RelatedI need to write a script that will take 1 command line argument. The argument will be a username. The script will determine if the user exists on the system and will print an error if it does not. If the user does exist it will determine if the user is currently logged in, if the user is not logged in it will determine the last time the user logged in and display the file in the users home directory that was most recently modified.
View 2 Replies View RelatedI have two files (not sorted) and need to compare line by line (i.e. first line of file1 to be compared to all the lines of file2 and so as for the rest of file1). Output will be an array of length of file2. Any suggestion in BASH other than a grep inside two read line loops ( which is time consuming for files ~1000s of lines).
View 2 Replies View RelatedI want to append at a new line if the old line is non empty. so it would be something like
Code:
1
2
3//dont add here
Code:
1
2
3
//add here
but if sometimes there could be extra empty line, then add at the empty line. So the script needs to detect whether or not the last line is empty. i figured out the symbol for a new line pattern is ^ so it would probably be sed "a^stuff here"is this right? but i dont seem to get the right result
I want to print the line number with the pattern of the line on a same line using multi-patterns in sed. But i don't know how to do it. For example, I have a file
abc
def
ghi
I want to print
1 abc
2 def
3 ghi
I've never programed shell scripting.
Code goes like so:
I simply want to read a file "data.txt" line by line Then char by char and add them into a result var. The file is supossed to always contain numeric values
I'm using a java application that runs as an interactive command line (in a terminal). My problem is that it's rather unfriendly as an interaction mode as it's minimalistic: it doesn't allow going to and fro with arrows, there's no history and so on. So I have to type all commands every time and have to retype it if I missed something at the beginning of the line, or I have to copy and paste from a txt editor. The strange thing is that I have seen the same application running on a Windows box and allowing for all the sugar. So I'm not sure if it's because of the shell script I run (as opposed to the .bat) or whether it has to do with system or profile settings in my shell.
For information, the shell script starts with:
Code:
#!bin/sh
I've replaced it with:
Code:
#!bin/bash
In hope I would have something closer to my normal terminal. The app runs but it doesn't change anything to the interactive mode. I'm rather clueless regarding sh/bash and so on. I've seen the manuals but I'm not entirely at home understanding and using their options. I know that there's a .bashrc and perhaps something like a profile somewhere, but I don't really know how to do things with these without risking messing up.
How can I list the following with grep. I want to extract 2 lines fron a text file The fixed known part if it exists will static text and the text line after it will change.
A sample file
.
.
textline1
[code]....
If the fixed part does Not exist how can I return error code 1
I have a project due for my Intro to C++ class and we are suppose to generate a file listing that will take an input of a C++ source code with .cpp extension and make a copy of it with a .lst extention that will have a line number preceding each and every line.
View 12 Replies View Related