My husband installed Linux on my computer about 2 months ago and ever since my computer has been stuck on the mute setting and I can't unmute it. There doesn't even seem to be a volume option anywhere on my computer. I am very bad with computers so I might just be looking in the wrong place.
View 2 RepliesI have an Asus 1005PE that I'm using Ubuntu 10.04 on. I've set up a hot key to mute/unmute by using the command
amixer sset Master toggle
For some reason it works fine if the computer is booted while not being muted, but if the computer is booted and is muted, the command will not unmute.
sound on laptop running linux mint 9 isadora after restarting or if computer is idle. when the computer is idle for a while the sound will stop working even though it doesn't show muted. after restarting i have to run alsamixer and the master tab will be muted. i can unmute and it will work until the computer sits idle for a while.
View 10 Replies View RelatedFedora 14 xfce
HP Mini 210
[url]
I am been using Fedora 14 on my HP mini for a few weeks now. Everything was working fine. However, since I have updated my system a few time using yum upgrade. I can no longer get the sound working.
If I go to Menu | multimedia | pulseaudio sound control
All the volumes levels are at 100%. However, the mute button is muted and everything I press it, it remains muted.
I have a microphone perfectly working on windows but I'm not able to use it on Ubuntu 10.10 64bit. I can't either record a sound or use skype.
I've installed Gnome-Alsa and unmuted every slider I could unmute on Alsa. But if I go on "Sound Preferences, Input, Choose a device for sound input" there's nothing I can choose. And the "input volume" is gray and so the "mute" check-box.
I thought that it was a driver problem so I went to Asus website to download Audio driver for my mother board (Asus Rampage II Gene). I got a package with Alsa drivers so I think they're already in Ubuntu.
What should I try?
I can't believe that a simple microphone doesn't work in Ubuntu 10.10 with a quite new Asus motherboard. It works in windows!
The volume on my computer randomly mutes/unmutes itself rapidly at unpredictable intervals. sometimes it works fine, other times it does not. I cannot find out what the problem is. I have never had this problem until recently, and this problem has surfaced in ubuntu 10.10, 10.04, 64 and 32 bit versions of the operating systems. I have used this hardware setup for a year before this problem ever surfaced. My hardware is installed and working fine, I just cannot figure out why this is happening. Does anyone know of some commands I can use to find out what is causing the volume to mute/unmute itself?
View 1 Replies View RelatedAccording to HDA Analyzer, my sound card is muted; however, I can't unmute it through HDA Analyzer or anything else. According to alsamixer, everything is unmuted, though. According to the ALSA documentation, there's no 'model' id for my codec -- Conexant 5069 -- so I don't have an option to put in /etc/modprobe.d/sound.conf. What can I do to unmute the card???
Here's the hardware: cat /proc/asound/cards:
0 [Intel]: HDA-Intel - HDA Intel
HDA Intel at 0xd6400000 irq 34
I recently purchased a Genius "SM-Live Value 5.1 Audio 5.1 Channel PCI Acceleration Card.". I see from the the User's Manual that it works with "Linux" and I'm pleased to confirm that it works very well with Debian Squeeze (although, after inserting the sound card in its slot, when I rebooted I got a dark sceen shortly after the Grub menu and the kernel wouldn't boot until I disabled the onboard codec in the BIOS).
The Genius soundcardI is recognized as:~$ lspci | grep audio03:01.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) The question is this: I get sound for either the speakers or the headphones by inserting their green phono plugs into the socket of the sound card at the back of my desktop computer but I don't get sound from the similar socket on the front. With the onboard audio device, the front socket works perfecly. At the moment, I'd like to have my two speakers permanenly plugged into the new soundcard at the back of the PC and reserve the front socket for the headphones. I'd also like to try "surround sound" some time. I've been digging around and found this ALSA Multi-channel Audio mini-HOWTO. But is all this somewhat convoluted configuration necessary just to unmute the front phono socket or am I missing a simpler solution?
As per the title, the per application volume mixer has disappeared and I can no longer unmute things i have previously muted.
View 2 Replies View Relatedfor christmas my parents got both my younger sister and i acer mini computers, model d250-1958. my sister was trying to change her password that lets herself as a particular user log in. somehpw she messed up the password and its not what she thought it was and now she doesn't have any way of accessing anything. i thought that there might be an ovveride system or a reseting trick. i've looked in the manual but cant find anything of the sort for either of the two options.
View 5 Replies View RelatedI am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
I recently installed Opensuse 11.2 on my Acer 3680 laptop. One problem I have notice is that while I can mute my volume control using the keyboard shortcuts, I cannot unmute it using the keyboard short cut. When I press the keyboard shortcut, which is maped to XF86audiomute, it display the popup indicating that the control is unmute, the control is not really unmute. I can unmute it by using the volumen control in the system tray.
I am puzzled, this did not happen under Fedora 12 nor Linux Mint 8 / Ubuntu 9.10. What could be the cause of the issue and what can I do to locate the source of the problem?
I boot linux from a usb drive so I can carry my distro wherever I go - I've been doing it for quite some time now and it's always worked wonderfully. Problem: This morning my little cousin unplugged the computer WHILE I was booting into linux. Power loss has happened before, but with no ill effects. This time however, it's decided it won't boot. The screen clears, and just as GRUB is about to load, it freezes and the computer reboots over and over.
I booted to a LiveCD of Ubuntu to try and fsck the drive, but it won't mount the volume. I've worked with this install so long, and have customized it so much I **really** don't want to do a reinstall.. What can I do?
I have a situation where I am trying to move some data from a Linux computer to a Windows computer. In all there is 700GB of data to move in about 1.5 million files, so I don't want to do this over the network.My first thought was to use an external USB hard drive and create an NTFS partition and copy the files from the linux computer to mount on the Windows computer. After 4 days of copying without completion I abandoned that idea. I thought the NTFS might be slowing it down, so I created an EXT3 partition. 4 Days later it was still copying. I did some calculations and there was no way the USB 2.0 connection was that slow. I then used ddrescue and cloned the drive to be copied overnight and it took about 12 hours. i was able to mount the USB drive under Linux and access the files appropriately. The only problem is that I can not access that USB drive on my Windows 7 computer. I have tried Explore2fs, DiskInternals Linux Reader, and Ext2 Installable File System For Windows, but none of them is recognizing the external drive.
View 5 Replies View RelatedI need redirect serial port from ONE computer to ANOTHER computer, and at the another send this port to VirtualBox with WindowsXP.VB needed because i need to use software for windoze I do this:NE computer:socat tcp-l:54321,reuseaddr,fork file:/dev/ttyS0,nonblock,waitlock=/var/run/tty0.lock
ANOTHER computer:
socat pty,link=/tmp/ttyS0,waitslave tcp:ONE:54321
Now (at ANOTHER) i've set serial port in VirtualBox as
[code]...
I get a Mount,Computer location error and will not mount any drives but boot! When I go to places->Computer on Linux Ubuntu 9.04 and I compiled gmp-4.3.1 and mpfr-2.4.1 last because I wanted gcc-4.4.1 to code and will not compile also gcc error not installed gmp-4.3.1 and mpfr-2.4.1. On screen is...
Could not Desplay "computer:". Nautilus cannot handle "computer" locations
I have three computers in my network, but two will be mentioned. Computer A is a Linux Mint 9/Windows 7 dual-boot, and I have just installed Mandriva Free 2010.2, which I will call Computer B.
Now my main problem is that Computer B, while it can see and access Computer A's shares as well as the third computer, the aforementioned computers cannot access Computer B. The message was: "Unable to mount location/Failed to mount Windows share." Now, the SMB protocol was used because of the third computer and Computer A have Windows OSs installed in them.
What I originally wanted was that I can share Computer B's NTFS partition, namely Documents and Downloads, to the other computers. And I can't do that, because of the error message.
What I can do, however, is use Computer B to view shares from the other two computers (Computer A, as an example). By my experiences in Linux Mint, I understand that I'd have to mount my Windows partitions in order to share them. I don't even know if my NTFS drive in Computer B is mounted, though that is what was described.
Here's the situation:
I have Ubuntu 9.1 with wubi and Vista on my laptop. I was playing my laptop through the TV, then I tried to switch it back to computer control and the computer went black. I had to hold to power button to restart, and suddenly grub4dos starts up when I try to launch ubuntu. I can still launch Vista. Is there anything I can do to save my system? At the very least, I would like to be able to copy data from my ubuntu system to my vista system. How can I do that? I can't find C:/ubuntu/disks. It doesn't seem to exist.
so here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies View RelatedI've been trying to find a way to watch videos from my main desktop computer on another computer I've plugged into an HDTV. I'm such a Linux newbie that I decided to give Mythbuntu a try. It was way to complicated for what I needed, and I'm sure that some more experienced people reading my first two sentences laughed to themselves at my naivety.
What I am trying to find is simple: browsing one computer's home folder from another computer, and playing the videos therein. If there's anything like Mythvideo that requires less than half of the skill requirements, I will telepathically send love to the person that informs me of it.
1. How can I stream music from my ubuntu computer (9.10) to my windows computer using vlc?
2. What nvidia driver should I use? The one found in "hardware drivers" is 185 but nvidia's site has 190! which one should I use?
i have 2 computers.both have pidgin messenger with the same accounts (yahoo, msn, aim, facebook...). both can connect at the same time. both connect at startup.both work well.some of the chat protocols disconnect upon sensing multiple connections (as in, when one account signs in from two places).good.others don't.bad.
is there a way to remotely disconnect the OTHER computer's pidgin while using the current computer? while both instances of pidgin are running, the OTHER computer will see all incoming messages on pidgin. anyone at that computer will see a one-sided conversation.simple solution would be to stop them from connecting at startup. that still doesn't solves the problem of "what if i forgot to turn one off" or "what if someone runs pidgin on the other computer."
My wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies View RelatedI have two computers in my home running ferora . I want to copy a file from my 2nd computer to my local computer. Local PC:- 192.168.1.10
Remote PC:- 192.168.1.20
[root@localhost root]#scp 192.168.1.20:/home file1.txt
root@192.168.1.20s password:
scp: /home not a regular file
[root@localhost root]
I have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies View RelatedI am wanting to make traffic pass through my computer to another computer.
Here is my current network setup:
[WAN] > [MODEM] > [10.1.1.3] > [192.168.56.101]
How can I make my computer ([10.1.1.3]) forward incoming traffic on port 25 to [192.168.56.101]?
i want to find ip address of other computer which are connected in LAN..suppose ther are 5 compter in LAN and i want to find ip of all remaining 4 computer using my computer only in command or any other way is ther....
View 4 Replies View RelatedI ran across a cool program that I would like to try out called x2x, which for those who don't know allows me to use the keyboard and mouse from one computer on another computer. Just google it and you'll find explanations better than that, but you get the gist?
Anyhow, I've installed SSH server and x2x on the computer that I want to control (laptop) and on the computer that I want to use to control the laptop (workstation) I stuffed into a terminal the following:
Code: ssh -XC riley@riley-Eee x2x -east -to :0.0 which, riley@riley-Eee does in fact refer to the laptop that I want to control. All I get back out is: Code: ssh: Could not resolve hostname riley-Eee: Name or service not known even though both systems are on the same router. I would assume that it should work right away no problem, but it doesn't. I don't understand SSH very well (or networking in general) so I'm wondering if someone knows how to step-by-step me through getting it to work.